4 Pin Screw Connector Reversing Cameras

Reversing camera to fit the Iveco Daily vans built between 2014 and 2022. Fits to the location of the brake light. It comes with a two-year guarantee, a high-quality image sensor, a 960H 700tvl high-resolution image, a very wide-angle field of view, and increases safety and awareness. 

Reversing camera to fit the Iveco Daily vans built after 2022. Fits to the location of the brake light. It comes with a two-year guarantee, a high-quality image sensor, a 960H 700tvl high-resolution image, a very wide-angle field of view, and increases safety and awareness. 

This brake light camera replaces your existing brake light housing with one that incorporates a reversing camera.

Our premium-quality Mercedes Citan and Renault Kangoo reversing camera is designed to replace the factory third high-level brake light on your van. It features a wide-angle field of view, a factory-fitted appearance, a two-year guarantee, a premium high-resolution 960h 700tvl PC4089 image sensor, and our usual fast dispatch and support.

Our top-quality High-Resolution Brake Light Reversing Camera to fit 2010+ Renault Master and Nissan NV400 vans, as well as 2010-2022 Vauxhall Movano vans. Upgraded 4089 700tvl hi-res image sensor, durable, night vision IR LED's, wide-angle, OEM look brake light camera.

• Upgraded 4089 High-Resolution Image Sensor - We don't settle the base level image sensor on our brake light cameras. We have opted for the 4089 700tvl image sensor, which is respected for its good colour replication, high resolution, and low light-level sensitivity.
• Night Vision IR LED's - A ring of separated Infra Red LED's provide the reverse camera with the ability to see hazards behind your van at night time. Don't worry about the light blinding other road users - it is visible to the camera but invisible to the human eye.
• 160° Extra Wide Viewing Angle Lens - We opt for the more expensive all-glass-composite lenses to be installed to our brake light cameras. This gives a very clear, undistorted view from the camera. It also prolongs the clear image compared to the cheaper plastic/glass composite lenses often seen elsewhere, where the plastic degrades and fades over time due to UV damage.
• Two-Year Guarantee - We consider the brake light manufacturer producing our cameras the best we have seen in our long experience. They stand by their product by fully supporting our 24-month guarantee period for brake light cameras. In the unlikely event of a problem with the camera during this period, we will provide a replacement.
• Great Factory-Look Appearance - This brake light reversing camera retains the factory look of your Trafic/Vivaro van. The camera is made to be an exact fit replacement for your existing high-level brake light.
• Increased Safety - Most importantly, this product will increase the safety of your van due to the increased visibility to the rear of your van. In the UK almost a quarter of all vehicle accidents occur whilst reversing. Decrease the risk of collision and injury by fitting this great quality brake light reverse camera.
• Optional Guidelines - The camera will show static coloured guidelines as standard. You can remove this and have no guidelines shown using the trigger loop next to the 4 pin connector.
• 4 Pin Connector / Optional RCA Adaptor Set - The camera is fitted with a 4 pin connector that carries both video signal and power. If you don't plan to use a 4 pin monitor, select the 4 pin to RCA adaptor set option. This adds a discounted bundle that includes adaptor to RCA Phono and an inline fused power wiring.

Brake light reversing cameras have quickly become the most popular option when retrofitting a camera on to a panel van as it's easy to install and looks original. This model is designed to suit Mercedes Vito vans from 2016 onwards. The camera uses the 4 pin aviation connector, however if you intend to use phono/RCA cabling we sell an adaptor set that is selectable in the drop down options of this listing.

Brake light reversing cameras have quickly become the most popular option when retrofitting a camera on to a panel van as it's easy to install and looks original. This model is designed to suit Mercedes Vito vans from 2016 onwards. The camera uses the 4 pin aviation connector, however if you intend to use phono/RCA cabling we sell an adaptor set that is selectable in the drop down options of this listing.

Brake light reversing cameras have quickly become the most popular option when retrofitting a camera on to a panel van as it's easy to install and looks original. This model is designed to suit Mercedes Vito vans from 2016 onwards. The camera uses the 4 pin aviation connector, however if you intend to use phono/RCA cabling we sell an adaptor set that is selectable in the drop down options of this listing.

Brake light reversing camera designed to fit the Volkswagen Transporter T5 and T6 2 Door vans built between 2003 and present. Retains the tidy factory look of your van, whilst adding a new layer of safety when reversing. Good quality image sensor - PC4089 700tvl. 2 Year Guarantee and quick dispatch.

This camera has been designed to replace your brake light to add a camera.

This camera has been designed to replace your brake light to add a camera.

Brake light reversing camera to fit the mark 7 Ford Transit vans built between 2006 and 2013. Extra wide angle 170 degree field of view. 2 Year Guarantee with us - REVCAMUK - the trusted UK reversing camera specialist. PC4089 960h 700tvl image sensor and quality lens combo. 2 year guarantee on this durable camera. Fits in the original location of the high level brake light. Add an additional layer of reversing safety today. Quick delivery and excellent service as standard.

Our top-quality brake light reverse camera is designed to replace the OEM brake light on 2008+ Citroen Berlingo and Peugeot Partner vans, 2018+ Vauxhall Combo, and 2019+ Toyota Pro Ace City. Retrofitting our top-specification brake light reversing camera allows you to retain the factory look and add an extra layer of safety to avoid injury to property or pedestrians. 4089 image sensor, 2-year guarantee, pure glass lens, and top build quality, everything you would expect from the forum favourites.

This camera has been designed to replace your LED brake light to add a camera.

Our brake light reversing camera designed to fit both the Mercedes Sprinter and VW Crafter vans. Designed so that you take the OEM LED light strip out of your old high level brake light to transplant in the new brake light camera housing. Full instructions provided.

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 120° wide angle parking/reversing camera. The camera body is painted black, whilst the bracket is polished stainless steel. The image sensor fitted is our favourite AHD signal sensor. 

Please note that this can ONLY be used with 1080P AHD PAL signal compatible displays. Most screens available today still aren't compatible with this signal so please double check before ordering.

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 120° wide angle parking/reversing camera. The camera body is painted black, whilst the bracket is polished stainless steel. The image sensor fitted is our favourite AHD signal sensor. 

Please note that this can ONLY be used with 1080P AHD PAL signal compatible displays. Most screens available today still aren't compatible with this signal so please double check before ordering.

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 120° wide angle parking/reversing camera. The camera body is painted white, whilst the bracket is polished stainless steel. The image sensor fitted is our favourite AHD signal sensor. 

Please note that this can ONLY be used with 1080P AHD PAL signal compatible displays. Most screens available today still aren't compatible with this signal so please double check before ordering.

We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 120° wide angle parking/reversing camera. The camera body is painted white, whilst the bracket is polished stainless steel. The image sensor fitted is our favourite AHD signal sensor. 

Please note that this can ONLY be used with 1080P AHD PAL signal compatible displays. Most screens available today still aren't compatible with this signal so please double check before ordering.

Reversing camera to fit 2017 onwards Volkswagen Crafter vans. Designed to attach to the pre-existing high-level third brake light on the van. All fixings, instructions, and hole saws are provided to facilitate the installation of the camera. It is fitted with a premium 700tvl high-resolution image sensor, quality wide-angle lens, and IR LEDs for night vision, and it comes with a two-year guarantee with us.

This is a colour reversing camera which fits in the bumper of your car or vehicle. It comes with a hole saw that is the correct width to cut the hole for the camera. It has infra red LED's to allow for good night time sight. Cable length of 1-20M can be selected inside listing.