Citroen Relay Reversing Camera Kits for Brake Light

• Brake light reversing camera to fit Fiat Ducato 2006-Present, Citroen Relay 2006-Present, Peugeot Boxer 2006-Present, and Vauxhall Movano 2022-Present vans.
• Top quality 7 inch rear view mirror monitor display, with options to either clip over existing mirror, or attach directly to the windscreen fitment.
• Two swan neck brackets are selectable depending on the metal windscreen fitment/button that is present on your van. If you have nothing present, we supply a swan neck bracket that allows you to add a fitting/button (with loctite 319 glue).
• 2 Year Guarantee with the specialists - Reversing Cameras UK Ltd.

• Brake light reversing camera to fit Fiat Ducato 2006-Present, Citroen Relay 2006-Present, Peugeot Boxer 2006-Present, and Vauxhall Movano 2022-Present vans.
• Top quality 7 inch rear view mirror monitor display, with options to either clip over existing mirror, or attach directly to the windscreen fitment.
• Two swan neck brackets are selectable depending on the metal windscreen fitment/button that is present on your van. If you have nothing present, we supply a swan neck bracket that allows you to add a fitting/button (with loctite 319 glue).
• 2 Year Guarantee with the specialists - Reversing Cameras UK Ltd.

• Twin Lens brake light reversing + driving rear view camera to fit Fiat Ducato 2006-Present, Citroen Relay 2006-Present, Peugeot Boxer 2006-Present, and Vauxhall Movano 2022-Present vans.
• Top quality 7 inch rear view mirror monitor display, with options to either clip over existing mirror, or attach directly to the windscreen fitment.
• Two swan neck brackets are selectable depending on the metal windscreen fitment/button that is present on your van. If you have nothing present, we supply a swan neck bracket that allows you to add a fitting/button (with loctite 319 glue).
• 2 Year Guarantee with the specialists - Reversing Cameras UK Ltd.

This system uses the dash monitor which has the most modern version of 5 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 5 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest  700TVL 960H image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 5 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest  700TVL 960H image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

• This brake light reversing camera supplied in this kit is the most popular type of reverse camera for Fiat Ducato, Peugeot Boxer, Citroen Relay vans built between 2006-present, and more recently 2022+ new model Movano vans.
• Simply remove the existing brake light and insert the new brake light supplied in this kit with the built in reverse camera.  The existing brake light wire will need connecting up to the new wire provided.
• The 7" display used in this kit is one of the best we have ever seen, it comes from a very reliable and good quality factory - not to be confused with other similar cheap and cheerful monitors sold elsewhere.
• Either use the static guidelines that the brake light reversing camera generates, or turn these off, and use the programmable guideline function of this top of the range monitor (requires connection to reverse light).
• The monitor has a green reverse trigger wire, if you attach this to a reverse light feed, then the monitor/camera will trigger ON/OFF with reverse gear.  
• The monitor provides power to the camera, so just one power feed is required to produce a picture.  This also means that you can turn the camera on at any time you wish, including full time.  Please note that the camera will be angled down (optimised for parking), so would not see all the way down the road.
• Avoids CANBUS issues as the monitor powers the camera from the power supply at the front.
• There are half a dozen brake light camera manufacturers.  We use the one that in our experience has the best image sensor, lens quality, and reliability.  They may not be the cheapest option, but quality and reliability is important to both us and our regular customers.
• 2 Year Guarantee with us, in the unlikely event anything should go wrong.

• This brake light reversing camera supplied in this kit is the most popular type of reverse camera for Fiat Ducato, Peugeot Boxer, Citroen Relay vans built between 2006-present, and more recently 2022+ new model Movano vans.
• Simply remove the existing brake light by pressing down the 3 tabs (top and bottom) with a small flat head screw driver to release the light strip.  Then insert in to the new brake light housing supplied in this kit with the built in reverse camera.
• The 7" display used in this kit is one of the best we have ever seen, it comes from a very reliable and good quality factory - not to be confused with other similar cheap and cheerful monitors sold elsewhere.
• Either use the static guidelines that the brake light reversing camera generates, or turn these off, and use the programmable guideline function of this top of the range monitor (requires connection to reverse light).
• The monitor has a green reverse trigger wire, if you attach this to a reverse light feed, then the monitor/camera will trigger ON/OFF with reverse gear.  
• The monitor provides power to the camera, so just one power feed is required to produce a picture.  This also means that you can turn the camera on at any time you wish, including full time.  Please note that the camera will be angled down (optimised for parking), so would not see all the way down the road.
• Avoids CANBUS issues as the monitor powers the camera from the power supply at the front.
• There are half a dozen brake light camera manufacturers.  We use the one that in our experience has the best image sensor, lens quality, and reliability.  They may not be the cheapest option, but quality and reliability is important to both us and our regular customers.
• 2 Year Guarantee with us, in the unlikely event anything should go wrong.

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL 960H image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

• Brake light reversing camera for Fiat Ducato, Citroen Relay, Peugeot Boxer and Vauxhall Movano
• CVBS NTSC video output with 700 TVL resolution
• Upgraded PC4089 image sensor – higher grade than lower-grade versions commonly used elsewhere
• High-quality all-glass composite lens resists sun fade and ageing
• OEM-style brake light housing with 2-year Revcamuk guarantee

• Slimline CVBS 700 TVL brake light reversing camera for Fiat Ducato, Citroen Relay, Peugeot Boxer and 2022+ Vauxhall Movano.
• Upgraded PC4089 image sensor with high quality all glass composite lens for clear and reliable image quality.
• Outputs standard CVBS (NTSC) signal compatible with most aftermarket reversing camera monitors and head units.
• 160° diagonal wide viewing angle to help spot posts, bollards and pedestrians when reversing.
• IP68 waterproof slimline housing, built for vans and motorhomes that live outside in the great British weather.
• Choice of rear bolt-through or front-screw mounting versions, both backed by a 2-year Revcamuk guarantee.

• Dual-view CVBS 700 TVL brake light camera for Fiat Ducato, Citroen Relay, Peugeot Boxer and 2022+ Vauxhall Movano.
• Twin-lens design provides both a reversing view and an always-on rear-view while driving.
• Upgraded PC4089 image sensors with high-quality all-glass composite lenses for clear and reliable image quality.
• Outputs standard CVBS (NTSC) signals compatible with most aftermarket monitors and head units.
• IP68 waterproof brake light housing built for year-round outdoor use.
• Supplied with 7-pin main cable, splitter adaptor and backed by a 2-year Revcamuk guarantee.