Bumper / Flush Reversing Camera Kits

Bumper / Flush Reversing Camera Kits

Flush-fitting bumper mount reversing camera kits are popular for car/van/motorhome owners. These reverse camera kits all come the correct sized hole saw to drill a hole in the bumper to mount the reversing camera.

Bullet/Bumper Reversing Camera Kit with Mirror Monitor | PM34 ***

KIT-PM34
  • This reversing camera kit comes with the mirror monitor. You may choose either the clip-over existing mirror version, which has strong spring loaded clamps that will secure it to your existing interior mirror, or attach directly to the windscreen with one of our bracket options (see description below for details on choosing the right bracket).
  • This kit is supplied with a flush-fitting bumper reverse camera, usually fitted in the bumper but can be mounted anywhere that you can reach the rear to tighten the securing ring up.
  • Choice of image sensor from : 1/3" Sony CCD (90 degree lens), 1/3" Sony CMOS (120 degree lens), or a 1/2.7" CMOS 2399 1080P (95 degree lens). 
  • The reversing camera is fitted with built-in with IR LEDs to provide a good image in low light levels.  
  • The camera is supplied with the correct sized hole saw for the camera body (28mm) to facilitate an easy installation. 
  • The camera has a threaded body, it is supplied with angled rings and spacer rings that fit behind the bumper/body to make tightening up from the back a bit easier, plus a slight adjustment if using the angled rings (one on outside, corresponding one on inside).

£180.00

VAT Included £30.00

Flush Fit Bumper/Bullet Reversing Camera Kit with 5" Dash Monitor - PM54

KIT-PM54
  • Comes with a 5 inch high resolution digital panel heavy duty monitor.
  • Wide choice of mounting options for the monitor (see images/drop down menu).
  • Suitable for both 12V and 24V vehicles.
  • Avoids CANBUS issue, as the monitor provides power to the camera.
  • Various power options eg lighter plug/fuse taps (see further down for details).
  • Comes with a flush fitting bumper mount reversing camera, fitted with either the 1/3" Sony CCD 600TVL image sensor, or the 1/3" Sony CMOS 700TVL image sensor.
  • Fitted with either a 90 degree lens (Sony CCD option) or a 120 degree lens (Sony CMOS option).
  • Waterproof rating of this camera is IP68
  • Easy to install, with a range of power options. Just one power connection powers the system.
  • Our extension cables are high quality, with the inner cores consisting of pure copper.
  • This kit comes with a 2 year guarantee from us - REVCAMUK. Our reputation on forums and groups will show how trusted we are to look after our customers.

£180.00

VAT Included £30.00

7" Dash Monitor + Bullet Bumper/Flush Reversing Camera Kit - PM64 ***

KIT-PM64

Our complete reversing camera kit comprising of a 7 inch monitor with stand/bracket choice options, as well as a flush fitting bullet/bumper reversing camera with image sensor quality options, plus all the cabling required.

Great Image Quality - Whether you choose the standard definition version with the Sony CCD image sensor, or you opt for the upgraded version with the 2399 camera image sensor fitted and the upgraded IPS panel display you can be assured of a great picture.

IP68 Waterproof Camera - Sometimes bumper cameras have a bad reputation for leaking, but not this camera. We have stocked this model from the same supplier for numerous years with no issues. We believe this is because this camera is constructed with mechanical seals versus applying sealant (common elsewhere). Please kindly note that on the Sony CCD option there is an inline voltage regulator on the cable that should be kept dry, if you aren't able to get this somewhere protected, please select the AHD upgrade version.

Night Vision IR LEDs - The camera is fitted with IR LEDs to provide the camera with a light source to illuminate the area behind the camera. This is not visible to the human eye, so won't disturb any drivers behind you, but it will be useful to the camera to provide you with an image showing any hazards in the dark.

Two-Year Guarantee - We stand behind our products. Performance and reliability are the most important factors for us when curating our range. This means if a factory defect shows itself during the 24-month period after sale, we will provide a replacement for the affected item.

£192.00

VAT Included £32.00
Quantity

7" Heavy Duty Dash Screen + Sony (CCD or CMOS option) Bullet Bumper/Flush Reversing Camera Kit - PM84 ***

KIT-PM84
  • Kit is supplied with our flush fitting bumper reverse camera, which is fitted with the very respected Sony 600TVL CCD image sensor - CCD gives great dynamic range and low light level performance.
  • The reversing camera has IR LED night vision.
  • The reversing camera has angled rings that can be used to adjust the camera angle if required - although this then wouldn't be as flush fitting.
  • This reversing camera kit uses our 3 channel 7 inch monitor, which has a sturdy side mounting U bracket.
  • The monitor has a long proven track record for reliability in demanding conditions - a farmers favourite, as well as HGV/Lorry, Motorhome, and van owners.
  • The monitor auto dims the brightness settings depending on ambient light via its integrated light sensor.
  • The camera uses the 4 pin aviation locking connector, this connector is found across many suppliers now, as it has proven itself to be the most durable connection.
  • The kit comes with a 2 year guarantee with us. We will also support you long beyond that, with spares/repairs/advice etc.

£192.00

VAT Included £32.00
Quantity