Reversing Camera Kits with 7" Slimline Monitor

• 7" slimline dash monitor with clear digital LCD display.
• Black stainless-steel bracket camera with Sony CCD 700TVL sensor, optional Sony AHD 1080P upgrade.
• Choice of lens: 120° wide for reversing or 60° narrow for rear-view driving.
• IP68 waterproof housing with an anti-rust stainless bracket.
• Easy-fit aviation cabling avoids CANBUS issues, optional lighter plug or fuse tap available.
• 12–24 V DC with surge protection, 2-year UK warranty included.

• 7" dash monitor with high-resolution digital LCD display.
• White stainless-steel bracket camera with Sony CCD 700TVL sensor, optional Sony AHD 1080P upgrade.
• Choice of lens: 120° wide for reversing or 60° narrow for rear-view driving.
• IP68 waterproof housing with stainless bracket, anti-vibration design.
• All-in-one aviation cabling avoids CANBUS issues, optional lighter plug or fuse tap available.
• 12–24 V DC with surge protection, backed by 2-year UK warranty.

• This reversing camera kit comes with surface mounted monitor display, fitted with a 7" LCD panel. This monitor comes with a dashboard mounting bracket, but also fits other mounting brackets.
• Comes with a twin lens bracket camera, which houses both a 120° reversing camera for parking, and a 45°rear view camera for driving.
• Choice of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down).
• The camera is fitted with a stainless steel bracket, which has proven itself to protect against rust.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• This reversing camera kit comes with surface mounted monitor display, fitted with a 7" LCD panel. This monitor comes with a dashboard mounting bracket, but also fits other mounting brackets.
• Comes with a twin lens bracket camera, which houses both a 120° reversing camera for parking, and a 45°rear view camera for driving.
• Choice of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down).
• The camera is fitted with a stainless steel bracket, which has proven itself to protect against rust.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

Our complete reversing camera kit comprising of a 7 inch monitor with stand/bracket choice options, as well as a flush fitting bullet/bumper reversing camera with image sensor quality options, plus all the cabling required.

Great Image Quality - Whether you choose the standard definition version with the Sony CCD image sensor, or you opt for the upgraded version with the 2399 camera image sensor fitted and the upgraded IPS panel display you can be assured of a great picture.

IP68 Waterproof Camera - Sometimes bumper cameras have a bad reputation for leaking, but not this camera. We have stocked this model from the same supplier for numerous years with no issues. We believe this is because this camera is constructed with mechanical seals versus applying sealant (common elsewhere). Please kindly note that on the Sony CCD option there is an inline voltage regulator on the cable that should be kept dry, if you aren't able to get this somewhere protected, please select the AHD upgrade version.

Night Vision IR LEDs - The camera is fitted with IR LEDs to provide the camera with a light source to illuminate the area behind the camera. This is not visible to the human eye, so won't disturb any drivers behind you, but it will be useful to the camera to provide you with an image showing any hazards in the dark.

Two-Year Guarantee - We stand behind our products. Performance and reliability are the most important factors for us when curating our range. This means if a factory defect shows itself during the 24-month period after sale, we will provide a replacement for the affected item.

• 7-inch dash monitor with dashboard bracket
• Numberplate “cigar” style reversing camera
• 600TVL CMOS standard or GalaxyCore AHD 1080P upgrade
• 150° wide-angle lens with premium aspheric design
• IP69K rated camera housing for tough conditions
• 12-24 V, optional lighter plug or fuse tap, 2-year UK warranty

• 7-inch dash monitor with digital LCD panel
• Numberplate frame reversing camera with discreet OEM-style fit
• Choice of 600TVL CMOS or 1080P AHD upgrade
• 150° wide-angle aspheric lens (minimises distortion)
• IP69K waterproof rating – highest standard
• One power connection – easy installation
• 2-year guarantee and lifetime UK support

• This reversing camera kit comprises of a bolt type number plate reverse camera, designed to fit to the number plate light area of your vehicle. Plus a top quality high resolution mirror monitor.
• The dash monitor uses a high quality 7 inch LCD digital panel, that gives great colour and brightness. The monitor can be set up to display guidelines by attaching green wire to reverse light supply and setting them up in the menu system. You can even adjust the position of the guidelines inside the menu system. We include full instructions on this, which can be found further down this screen as a downloadable PDF.
• The bolt type number plate reversing camera has had an update for 2023. We have been so impressed with the quality of the PC4089 700TVL image sensor, combined with the all glass composite lenses (the same as we use with our brake light cameras), that we had the same factory make these reversing cameras with the same setup.
• The camera fixes to the vehicle via a bolt and nut, which the wire travels through in to the vehicle.
• The camera is fitted with a very wide angle lens, to be able to easily see all around the rear of the vehicle.

• 7″ dash monitor with high-res panel
• Compact bracket camera (painted stainless steel bracket), mount vertical or horizontal
• Sony CCD 700TVL sensor for sharp image quality
• IP68 waterproof housing for protection
• Aviation 4-pin wiring, optional power adaptors
• 2-year UK warranty included

• 7″ LCD monitor with 800×480 resolution and vivid display
• Roof overhang pod camera with Sony 700TVL CCD sensor
• Optional AHD upgrade for sharper definition
• IP68 rated waterproof housing; robust overhang build
• 12-24V compatible; aircraft-grade wiring with locking 4-pin connector
• Extension plate available for thick rear doors
• 2-year UK warranty & lifetime support

• This reversing camera kit comes with surface mounted monitor display, fitted with a 7" LCD panel. This monitor comes with a dashboard mounting bracket, but also fits other mounting brackets.
• Comes with a black dome reversing camera, fitted with one of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option inside the listing).
• Fitted with a 120 degree wide angle lens.
• Designed to be mounted on the rear wall of a vehicle - ideally high up.
• Can be adjusted to look downwards, or backwards.
• Popular for motorhomes and vans.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• 7-inch stand-on-dash monitor with high-res LCD panel & auto-dimming
• Diamond-shaped rear camera, choice of black or white
• PC4089 700TVL standard sensor or C2399 1080P AHD upgrade
• 150° wide-angle all-glass lens for good rear area coverage
• Single power lead, aviation cabling, multiple mounting options
• 2-year warranty & lifetime support

• The reversing camera kit comes with surface mounted monitor display, fitted with a 7" LCD panel. This monitor comes with a dashboard mounting bracket, but also fits other mounting brackets.
• Popular with customers who require two cameras in two different locations, such as horsebox owners. The cameras can be used both inside and outside.
• Comes with two black bracket cameras, fitted with one of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down). Switch between the two with the CAM button on the monitor, or by attaching the trigger wire to reverse light feed.
• The cameras are fitted with a stainless steel bracket, which has proven itself to protect against rust.
• 120 degree wide angle lens fitted to cameras.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• The reversing camera kit comes with surface mounted monitor display, fitted with a 7" LCD panel. This monitor comes with a dashboard mounting bracket, but also fits other mounting brackets.
• Popular with customers who require two cameras in two different locations, such as horsebox owners. The cameras can be used both inside and outside.
• Comes with two black bracket cameras, fitted with one of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down). Switch between the two with the CAM button on the monitor, or by attaching the trigger wire to reverse light feed.
• The cameras are fitted with a stainless steel bracket, which has proven itself to protect against rust.
• 120 degree wide angle lens fitted to cameras.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• This brake light reversing camera supplied in this kit is the most popular type of reverse camera for Fiat Ducato, Peugeot Boxer, Citroen Relay vans built between 2006-present, and more recently 2022+ new model Movano vans.
• Simply remove the existing brake light and insert the new brake light supplied in this kit with the built in reverse camera.  The existing brake light wire will need connecting up to the new wire provided.
• The 7" display used in this kit is one of the best we have ever seen, it comes from a very reliable and good quality factory - not to be confused with other similar cheap and cheerful monitors sold elsewhere.
• Either use the static guidelines that the brake light reversing camera generates, or turn these off, and use the programmable guideline function of this top of the range monitor (requires connection to reverse light).
• The monitor has a green reverse trigger wire, if you attach this to a reverse light feed, then the monitor/camera will trigger ON/OFF with reverse gear.  
• The monitor provides power to the camera, so just one power feed is required to produce a picture.  This also means that you can turn the camera on at any time you wish, including full time.  Please note that the camera will be angled down (optimised for parking), so would not see all the way down the road.
• Avoids CANBUS issues as the monitor powers the camera from the power supply at the front.
• There are half a dozen brake light camera manufacturers.  We use the one that in our experience has the best image sensor, lens quality, and reliability.  They may not be the cheapest option, but quality and reliability is important to both us and our regular customers.
• 2 Year Guarantee with us, in the unlikely event anything should go wrong.

• This brake light reversing camera supplied in this kit is the most popular type of reverse camera for Fiat Ducato, Peugeot Boxer, Citroen Relay vans built between 2006-present, and more recently 2022+ new model Movano vans.
• Simply remove the existing brake light by pressing down the 3 tabs (top and bottom) with a small flat head screw driver to release the light strip.  Then insert in to the new brake light housing supplied in this kit with the built in reverse camera.
• The 7" display used in this kit is one of the best we have ever seen, it comes from a very reliable and good quality factory - not to be confused with other similar cheap and cheerful monitors sold elsewhere.
• Either use the static guidelines that the brake light reversing camera generates, or turn these off, and use the programmable guideline function of this top of the range monitor (requires connection to reverse light).
• The monitor has a green reverse trigger wire, if you attach this to a reverse light feed, then the monitor/camera will trigger ON/OFF with reverse gear.  
• The monitor provides power to the camera, so just one power feed is required to produce a picture.  This also means that you can turn the camera on at any time you wish, including full time.  Please note that the camera will be angled down (optimised for parking), so would not see all the way down the road.
• Avoids CANBUS issues as the monitor powers the camera from the power supply at the front.
• There are half a dozen brake light camera manufacturers.  We use the one that in our experience has the best image sensor, lens quality, and reliability.  They may not be the cheapest option, but quality and reliability is important to both us and our regular customers.
• 2 Year Guarantee with us, in the unlikely event anything should go wrong.

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL 960H image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

• Upgraded 4089 High-Resolution Image Sensor - We don't settle the base level image sensor on our brake light cameras. We have opted for the 4089 700tvl image sensor, which is respected for its good colour replication, high resolution, and low light-level sensitivity.
• Premium 7" High-Resolution Digital LCD Panel Display - We have the high resolution digital LCD panels installed on this monitor. They provide great replication of colour and a sharp image.
• Night Vision IR LED's - A ring of separated Infra Red LED's provide the reverse camera with the ability to see hazards behind your van at night time. Don't worry about the light blinding other road users - it is visible to the camera but invisible to the human eye.
• 160° Extra Wide Viewing Angle Lens - We opt for the more expensive all-glass-composite lenses to be installed to our brake light cameras. This gives a very clear, undistorted view from the camera. It also prolongs the clear image compared to the cheaper plastic/glass composite lenses often seen elsewhere, where the plastic degrades and fades over time due to UV damage.
• Two-Year Guarantee - We consider the brake light manufacturer producing our cameras the best we have seen in our long experience. They stand by their product by fully supporting our 24-month guarantee period for brake light cameras. The monitor is also super reliable and will carry on working for many years to come. The monitor is also covered by the same two year guarantee period. Our extension cables, being pure copper, are highly unlikely to degrade, but for your reassurance, they are protected, too. In the unlikely event of a fault with any part of this kit during this period, we will provide a replacement.
• Great Factory-Look Appearance - This brake light reversing camera retains the factory look of your Trafic/Vivaro van. The camera is made to be an exact fit replacement for your existing high-level brake light.
• Increased Safety - Most importantly, this product will increase the safety of your van due to the increased visibility to the rear of your van. In the UK almost a quarter of all vehicle accidents occur whilst reversing. Decrease the risk of collision and injury by fitting this great quality brake light reverse camera.
• Optional Guidelines - The camera will show static coloured guidelines as standard. You can remove this and have no guidelines shown using the trigger loop next to the 4 pin connector.
• Various Monitor Bracket Options - See our guide below for the various mounting bracket options for the monitor. As standard, a "butterfly" bracket is included; alternative types can be ordered via the drop-down menu above.

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL 960H image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

• High Resolution 7" Display - Top quality 7 inch display. Comes with a butterfly style dash mount bracket. Additional monitor brackets and mounts available using the drop down menu. See further down description for details.
• Factory Fit Appearance - Exact Fit Replacement Brake Light Camera for 2010+ Renault Master, 2010+ Nissan NV400, and 2010-2022 Vauxhall Movano Vans
• 2 Year Guarantee - The quality of the system is second to none. We provide a 24 month guarantee period for all the parts that make up this reversing camera kit. Even beyond this time, we are able to provide spares and attempt low cost monitor repairs should something fail in the distant future.
• Upgraded Image Sensor - The image sensor is one of the most important aspects in achieving good picture quality on a reversing camera. We don't accept the base spec when it comes to our cameras. We opt for improved components that we know work well. This reverse camera is fitted with the 4089 premium 700tvl image sensor. We have used it for many years; it provides great colours, a high resolution, as well as being reliable.
• All Glass Composite Lens - Often overlooked is the quality of the lens fitted to the camera. This camera is fitted with an all-glass composite lens, giving an excellent image for many years. We steer clear of the cheaper standard plastic+glass lenses, which fade over time due to UV damaging the plastic layers. There is no problem with this camera and the all-glass construction lens.
• Night Vision IR LED's - When night time comes you will still benefit from this camera due to the ring of fitted IR LED's. The combination of the IR LED's and the sensitive modern 4089 image sensor means that you will still see any obstacles even at night. Don't worry about these shining at anyone following you; the light is visible to the camera but invisible to the human eye.
• Guidelines ON/OFF - As standard the brake light camera will come with static guidelines being added. There will be a trigger loop that allows you to remove these should you not wish to use them. The Monitor also allows you to use its guidelines (if connecting the green reverse trigger wire to reverse gear). The monitor guidelines have the added bonus of allowing you to adjust where they sit on the screen to make them more useful.
• Easy to fit - Simply remove your old brake light housing (one bolt at the rear), then pop the brake light housing from the kit in its place, move the bulb from the old housing to the new housing, and that's the camera installed.

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the 7 inch dash mount monitor, which has a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234). Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234). Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

• This brake light reversing camera supplied in this kit is the most popular type of reverse camera for Berlingo/Partner/Combo/ProAce City vans.
• Simply remove the existing brake light and replace with the one supplied in this kit with a built in camera.
• The 7" display used in this kit is one of the best we have ever seen, it comes from a very reliable and good quality factory - not to be confused with other similar cheap and cheerful monitors sold elsewhere.
• Either use the static guidelines that the brake light reversing camera generates, or turn these off, and use the programmable guideline function of this top of the range monitor (requires connection to reverse light).
• The monitor has a green reverse trigger wire, if you attach this to a reverse light feed, then the monitor/camera will trigger ON/OFF with reverse gear.  
• The monitor provides power to the camera, so just one power feed is required to produce a picture.  This also means that you can turn the camera on at any time you wish, including full time.  Please note that the camera will be angled down (optimised for parking), so would not see all the way down the road.
• Avoid CANBUS issues with this system - as the monitor powers the camera from the power supply at the front.
• There are half a dozen brake light camera manufacturers.  We use the one that in our experience has the best image sensor, lens quality, and reliability.  They may not be the cheapest option, but quality and reliability is important to both us and our regular customers.
• 2 Year Guarantee with us, in the unlikely event anything should go wrong.

This system uses the Dash monitor which has the most modern version of 5 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well.   We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

This system uses the Dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well.   We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).