Monitors for reversing camera

This monitor is the upgrade to our popular MON1. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This has two inputs.

This is a version of our popular mirror monitor which has 4 screw holes in the back to fit a range of swan neck brackets that we stock to attach to an existing windscreen stub/button.

This monitor is the best version of the 5" stand On Dash monitor. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This monitor has three inputs.  This monitor has an optional reverse trigger wire which would turn the monitor on and off depending on if it's in reverse. Comes with two brackets, one for a curvy dashboard and the original u shaped bracket for flat dashboards.

This monitor is one of our newest.  This has a sunshade to prevent glare in sun and glare on the windscreen when using at night. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This has two inputs.  This monitor has a green trigger wire (which is optional if you wish to use or not).  When attached to the reverse light feed, it will switch the monitor on and select channel 2.  If already on it will change channel to number 2.

This has a sunshade to prevent glare in sun and glare on the windscreen when using at night. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This has two inputs.  This monitor has a green trigger wire (which is optional if you wish to use or not).  When attached to the reverse light feed, it will switch the monitor on and select channel 2.  If already on it will change channel to number 2.

This monitor is one of our newest.  This has a sunshade to prevent glare in sun and glare on the windscreen when using at night. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This has three inputs.  This monitor has trigger wires (which is optional if you wish to use or not).  When attached to the reverse light feed/indicator power, it will switch the monitor on and select the channel. 

This monitor is one of our newest.  This has a sunshade to prevent glare in sun and glare on the windscreen when using at night. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V. This has two inputs.  This monitor has a green trigger wire (which is optional if you wish to use or not).  When attached to the reverse light feed, it will switch the monitor on and select channel 2.  If already on it will change channel to number 2.

This monitor is one of our newest.  This has a sunshade to prevent glare in sun and glare on the windscreen when using at night. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This has three inputs.  This monitor has trigger wires (which is optional if you wish to use or not).  When attached to the reverse light feed/indicator power, it will switch the monitor on and select the channel. 

This is a very flexible monitor, enabling upto 4 cameras to be displayed on the screen at one time. If you only have 2 cameras attached it can view both of these at the same time. Power to the cameras come from the monitor, meaning you don't need to wire in any additional power leads. Most people that order these have 2 side cameras and 2 rear view cameras giving massive coverage. This monitor works with our 4 pin cameras and 4 pin cables.

Upto 4 Inputs! 10" Screen! Split screen functions and High Res Screen whilst monitor powers up all the cameras! Works with 12-24V systems.

We brought these in mainly for agricultural customers who either have very dusty environments or where the monitors will be exposed to the elements and covered in rain. See the photo's inside to see how we placed the monitor inside a fish tank to demonstrate its abilities.

This AHD monitor has two hybrid channel inputs capable of displaying both standard definition cameras, as well as the latest 720P/960P/1080P output AHD reversing cameras. 

This AHD monitor has two hybrid channel inputs capable of displaying both standard definition cameras, as well as the latest 720P/960P/1080P output AHD reversing cameras. 

This AHD monitor has two hybrid channel inputs capable of displaying both standard definition cameras, as well as the latest 720P/960P/1080P output AHD reversing cameras

• High Quality 7" IPS Panel Display - This is the most popular size display for vehicle monitors. Really colourful and sharp 1024*600 pixel 7 inch IPS display. IPS panels are seen in the gaming community thanks to their high definition, ability to display bright-vivid colours, and their wide viewing-angle (allows clear visibility even when you are positioned at an angle to the display).
• 3 Channel Inputs (up to 1080P AHD) - The monitor wiring is fitted with 3 channel inputs, which are controlled either via the Ch1, Ch2, and Ch3 buttons on the display, the remote control, or via trigger activation wires, e.g. reverse light (3 wires supplied if you wish to use).
• Removable Sunshade - If you have a bright cabin in your vehicle, you can use the supplied sunshade to prevent glare on the screen. This is easily removable at any time.
• Works on 12V and 24V Vehicles - This monitor can work on Vans, Motorhomes, HGL, LGV, etc., thanks to the 12-32V working voltage range. It will protect the cameras by ensuring a stabilised 12V supply is sent down the 4-pin cable.  
• Heavy-Duty Side Mounting Bracket Supplied - This monitor has a heavy-duty "u" bracket that attaches to the side mounting points. This durable bracket strongly holds the monitor securely in even the bumpiest environments. The bracket can be inverted to hang the monitor from the ceiling (if desired).
• Optional Brackets Available to fit Rear - The monitor is equipped with a rear central channel, allowing our large range of vehicle monitor mounting brackets to be fitted.

• Large High Quality 9" IPS Panel Display - This is one of our larger monitors, ideal for vehicles with a large dashboard. Really colourful and sharp 1024*600 pixel 9 inch IPS display. IPS panels are seen in the gaming community thanks to their high definition, ability to display bright-vivid colours, and their wide viewing-angle (allows clear visibility even when you are positioned at an angle to the display).
• 3 Channel Inputs (up to 1080P AHD) - The monitor wiring is fitted with 3 channel inputs, which are controlled either via the Ch1, Ch2, and Ch3 buttons on the display, the remote control, or via trigger activation wires, e.g. reverse light (3 wires supplied if you wish to use).
• Removable Sunshade - If you have a bright cabin in your vehicle, you can use the supplied sunshade to prevent glare on the screen. This is easily removable at any time.
• Works on 12V and 24V Vehicles - This monitor can work on Vans, Motorhomes, HGL, LGV, etc., thanks to the 12-32V working voltage range. It will protect the cameras by ensuring a stabilised 12V supply is sent down the 4-pin cable.
• Heavy-Duty Side Mounting Bracket Supplied - This monitor has a heavy-duty "u" bracket that attaches to the side mounting points. This durable bracket strongly holds the monitor securely in even the bumpiest environments. The bracket can be inverted to hang the monitor from the ceiling (if desired).
• Optional Brackets Available to fit Rear - The monitor is equipped with a rear central channel, allowing our large range of vehicle monitor mounting brackets to be fitted.

• Amazing 7" MIMO 1920x1200 Panel Display - We are very lucky to be able to acquire this monitor from one of our favourite manufacturers. They initially struggled to purchase the MIMO panels, as the minimum order quantity was so excessive. After some consistent persuasion they were finally able to get a sensible number to produce this amazing monitor. This panel is usually used for tablet displays, and as such will show off our range of 1080P AHD Reversing Cameras to their maximum definition.
• 3 Channel Inputs (up to 1080P AHD) - The monitor wiring is fitted with 3 channel inputs, which can be selected between using either a button on the display, the remote control, or via trigger activation wires, e.g. reverse light (3 wires supplied if you wish to use).
• Removable Sunshade - If you have a bright cabin in your vehicle, you can use the supplied sunshade to prevent glare on the screen. This is easily removable at any time. Please note that being a tablet style screen, the glass is more reflective than the matt finish we have on our alternative stand/dash monitors, so if you have a bright cab you would probably require this sunshade to be kept on.
• Works on 12V and 24V Vehicles - This monitor can work on Vans, Motorhomes, HGV, LGV, etc., thanks to the 12-32V working voltage range. It will protect the cameras by ensuring a stabilised 12V supply is sent down the 4-pin cable.  
• Heavy-Duty Side Mounting Bracket Supplied - This monitor has a heavy-duty "u" bracket that attaches to the side mounting points. This durable bracket strongly holds the monitor securely in even the bumpiest environments. The bracket can be inverted to hang the monitor from the ceiling (if desired).
• Optional Brackets Available to fit Rear - The monitor is equipped with a rear central channel, allowing our large range of vehicle monitor mounting brackets to be fitted.

A 4x Channel Split-Screen Mirror Monitor is to be used with our AHD High Definition Range of Side View Blind Spot / Reversing Cameras. Although this can display traditional CVBS cameras, it works better with the newer high-definition AHD series. 1024x600IPS panel, various split screen modes - full channel/two-way splits/three-way splits/four-way splits. This monitor has the strong spring loaded clips/clamps to attach to an existing interior mirror.

A 4x Channel Split-Screen Mirror Monitor is to be used with our AHD High Definition Range of Side View Blind Spot / Reversing Cameras. Although this can display traditional CVBS cameras, it works better with the newer high-definition AHD series. 1024x600IPS panel, various split screen modes - full channel/two-way splits/three-way splits/four-way splits. This monitor has the rear mounting holes to accept our range of mirror monitor brackets to attach directly to windscreen.

This is a very flexible monitor, enabling upto 4 cameras to be displayed on the screen at one time. If you only have 2 cameras attached it can view both of these at the same time. Power to the cameras come from the monitor, meaning you don't need to wire in any additional power leads. Most people that order these have 2 side cameras and 2 rear view cameras giving massive coverage. This monitor works with our 4 pin cameras and 4 pin cables.

4 Channel Split Screen Monitor that can accept up to 4 vehicle side view, rear view, and reversing cameras. Full-screen or split in one of various arrangements on screen. Advanced menu system to make alterations to settings. Full screen, 50/50 split, three-way, quad pattern split screen display. Can accept CVBS, 720P/960P/1080P AHD signal cameras. Heavy-Duty U Bracket. Instructions included, see download section of listing.

Ideal for pedestrian and cyclist safety, this large 10 inch IPS panel display with touchscreen allows you to mark out boxes to provide alerts when a pedestrian or cyclist enters that area of concern. The monitor features basic recording at 360P when inserting up to a 256GB SD card. The touchscreen works well, and makes adjusting the settings and zones easier compared to using a remote control (which is also provided). Optimal set up is using 2x side cameras, 1 rear reversing camera, and 1 front facing camera.