Mirror Monitor Brackets

Mirror Monitor Brackets

If you have one of the bracket style mirror monitors then you will have at least four screws to the rear that the brackets on this page can attach to. Please kindly note that clip on mirror monitors do not have these four screw holes and these mounts will not fit that type of monitor.

Mercedes Sprinter Hex Mounting (Auto Lights/Wiper models) Swan neck bracket for mirror monitors with 4 screw hole mounting - ACCMB1

We have encountered a different style of windscreen mount on some Mercedes Sprinter vans. We believe it is models that are fitted with either auto lights, or auto windscreen wipers.  This bracket will allow our bracket type mirror monitor to mount to this metal button.   Please see photo.

£18.00

VAT Included £3.00
Quantity

Ford* Swan neck bracket for non clip-over mirror monitors - ACCMB2 *check mounting on vehicle 1st

This mounting is typically seen on Ford vans, as well as some others.

£18.00

VAT Included £3.00
Quantity

Universal "add a button" Swan neck bracket bundle for non clip-over mirror monitors - ACCMB2+Button+Loctite 319 Glue

This bundle combines our ACCMB2 Ford/Universal bracket, together with a Ford/Universal windscreen "button", and the Loctite 319 rear view mirror button adhesive kit.

£24.00

VAT Included £4.00
Quantity

£24.00

VAT Included £4.00
Quantity

VW Volkswagen* Swan neck bracket bracket mirror monitors with 4 screw holes - ACCMB3

Rear View Mirror Monitor Mounting Bracket that attaches to the Windscreen Mirror Mounting plate that is usually found on VW Volkswagen vehicles such as the Transporter, Crafter, Caddy, and many more. The bracket is designed to attach to Bracket Mirror Monitors that have the 4 (sometimes 6) screws on the rear to facilitate mounting. The other side twists on to the existing windscreen button/mounting plate found on the vehicle. 

£18.00

VAT Included £3.00
Quantity

Mercedes* Swan neck bracket for non clip-over mirror monitors with 4 rear screw holes - ACCMB5 *check mounting on vehicle 1st

This mounting is typically seen on Mercedes Sprinter / Vito vans, as well as some Iveco vans, and the pre-2017 VW crafter.

£18.00

VAT Included £3.00
Quantity

Ceiling Mount Swan neck bracket for non clip-over mirror monitors with 4 screw hole mounting - ACCMB6

This mounting allows the bracket mirror monitor to be mounted on to the ceiling.

£18.00

VAT Included £3.00
Quantity

Shorter Model Ceiling Mount Swan neck bracket for non clip-over mirror monitors with 4 screw hole mounting - ACCMB6S

This mounting allows the bracket mirror monitor to be mounted on to the ceiling, it is our shorter model that has been requested numerous times

£18.00

VAT Included £3.00
Quantity OUT OF STOCK

Earlier Fiat Ducato / Citroen Relay / Peugeot Boxer / Iveco Daily Swan neck bracket for bracket capable mirror monitors - ACCMB7 *check mounting on vehicle 1st

This mounting is typically seen on earlier Ducato/Relay/Boxer/Iveco vans. This bracket is designed to mate with the OEM windscreen stub, so that a mirror monitor with a 4 screw mounting point can attach to it.

£18.00

VAT Included £3.00
Quantity

Vauxhall Vivaro/Movano, Renault Master, Nissan NV400 Swan neck bracket for mirror monitors with 4 screw holes - ACCMB8

Rear View Mirror Monitor Mounting Bracket that attaches to the Windscreen Mirror Mounting plate that is usually found on a lot of Renault Master vans, as well as Nissan NV400, and Vauxhall Movano/Vivaro. The bracket is designed to attach to Bracket Mirror Monitors that have the 4 (sometimes 6) screws on the rear to facilitate mounting. The other side slides up on to the existing windscreen button/mounting plate found on the vehicle. 

£18.00

VAT Included £3.00
Quantity

Windscreen Adaptor Plate for some Citroen / Fiat / Ford / Mercedes vehicles | MP35

Helps to adapt the factory fit metal windscreen plate fitted to numerous vehicles including Citroen Relay/Dispatch, Fiat Ducato, Peugeot Boxer/Expert, Mercedes Sprinter/Vito, Vauxhall Movano/Vivaro and many more. Attaches on to the original plate to make it the same size and shape as our ACCMB2, as well as most "universal" sized mirror arms, the most common of which is for Wolfbox and Autovox.

£12.00

VAT Included £2.00
Quantity

Windscreen Adaptor Plate for some Mercedes / Renault / Vauxhall / Nissan vehicles | MP42

Helps to adapt the factory fit metal windscreen plate fitted to numerous vehicles including Mercedes Sprinter/Vito, Renault Master/Trafic, Nissan NV300/NV400, Vauxhall Movano/Vivaro, VW Crafter (Pre-2017, and many more. Attaches on to the original plate to make it the same size and shape as our ACCMB2, as well as most "universal" sized mirror arms, the most common of which is for Wolfbox.

£15.00

VAT Included £2.50
Quantity

Mirror Monitor Brackets

Mirror Monitor Bracket Quick Finder (A–Z)

Tip 1: If your windscreen has no mirror mounting plate, choose the universal ACCMB2+Button+Glue option.

Tip 2: Some models have more than one fitment type. Where multiple codes are shown, check the product page photos against your mount. This is a guide, always check your fitment type before ordering.

Make Model Bracket code(s)
Citroën Dispatch ACCMB2+MP35
Citroën Relay ACCMB2+MP35 (later models)
ACCMB7 (early models)
Fiat Ducato ACCMB2+MP35 (later models)
ACCMB7 (early models)
Ford Connect ACCMB2
Ford Tourneo ACCMB2

ACCMB2+MP35

Ford Transit ACCMB2,
ACCMB2+MP35
Iveco Daily ACCMB7
Mercedes Sprinter ACCMB1,
ACCMB5
Mercedes Vito ACCMB5,
ACCMB1
Nissan NV300 / NV400 ACCMB5,
ACCMB8
Peugeot Boxer ACCMB2+MP35 (later models)
ACCMB7 (early models)
Peugeot Expert ACCMB2+MP35
Renault Kangoo ACCMB5
Renault Master ACCMB5,
ACCMB8
Renault Trafic ACCMB5,
ACCMB8
Vauxhall / Opel Movano ACCMB2+MP35,
ACCMB8
Vauxhall / Opel Vivaro ACCMB2+MP35,
ACCMB8
Volkswagen Caddy ACCMB3
Volkswagen Crafter ACCMB3,
ACCMB5 (pre-2017)
Volkswagen Transporter ACCMB3
No mirror plate fitted (any vehicle) ACCMB2+ Button+ Glue
Universal ceiling mount (long drop) ACCMB6
Universal ceiling mount (short drop) ACCMB6S