Small / Numberplate Reversing Cameras

• Excellent Image Quality - Thanks to the high-quality modern PC1058 600tvl high-resolution image sensor installed, coupled with an excellent Aspheric lens you can expect a sharp, clear image, with good colour replication.
• IP69K Waterproof - With the highest standard in water ingress protection, this reversing camera is sure to withstand anything the Great British weather chooses to unleash on it. Similar looking cameras tend to fill auto electricians with a sense of dread, as similar barrel based cameras have an awful reputation for leaking. Not this one! These cameras have been impeccable.
• Extra Durable and Reliable - Not to be confused with cheaper imitations. This model comes from one of our best rated manufacturers for reversing cameras. Fitting one of these cameras to your vehicle will give you trouble-free ownership.Adjustable Tilt Angle - There are two small screws to the front of the camera, which when turned anti-clockwise allows the camera barrel to rotate up/down. Once you have the perfect view, simply tighten back up to lock. The camera barrel can even be removed and refitted upside down, so that the camera can be at the bottom of the number plate instead of the top.
• Night Vision IR LED's - It is unusual for a numberplate camera to have night vision, this camera is fitted with 4x high powered Infra Red LED's, which provides the camera with light to keep you safe at night time. The light is invisible to the human eye, so no worries about blinding following traffic.
• Built In Microphone - The camera is fitted with a microphone, which may be useful to some customers who want to hear instructions from people close to the camera. Please be aware that to hear the microphone, you need to ensure that your Monitor has a built-in speaker.
• Extra Wide Aspheric Lens - 150 degrees field of view, without the fish bowl effect, thanks to the really high quality Aspheric lens installed in this reverse camera.
• 4 Pin Connector / Optional RCA Phono Adaptors - The camera uses the most popular 4 pin screw connector to take Video Signal, Audio from the microphone, and Power. Should you wish to convert this to RCA Phono Connection e.g. for an RCA Monitor or Stereo Headunit e.g. Sony/Kenwood/Pioneer you can order a discounted bundle set which has our 4 pin to RCA Adaptor + Power Wire with inline fuse + RCA Coupler.
• Easy to Fit - One of the most widely reported feedback we get from customers about this camera is that it is so easy to fix to the vehicle thanks to it re-using the original fixings for the numberplate. Check out our video below to see what is involved in fitting.

• Great Image Quality - With the modern premium PC1058 image sensor combined with the high-quality Aspheric lens, the image this reversing camera produces is really impressive. It will produce a decent image day and night.
• Extra Wide Angle Quality Aspheric Lens - This camera has a built-in 150 degree Aspheric Lens. This means you get a very sharp and clear image, which is also very wide, yet doesn't look like you are looking out of a fishbowl.
• Superb Build Quality - This style of reversing camera traditionally has a bad reputation. When I show auto electricians who visit us and suggest this one, they are filled with dread as most similar-looking cameras sold elsewhere are likely to leak. After I assure them that ours is entirely different and they try them out, it becomes a favourite.
• Adjustable Tilt - You can rotate and lock the adjustment of the camera. This means you can obtain the optimum viewing angle to get the most out of your reverse camera.
• IP69K Waterproof Rating - With the highest water and dust ingress protection rating that you can get, rest assured this camera will cope with the worst weather you can imagine.
• Flexible Mounting Location - Designed so that it can either be mounted on a vertical surface e.g. rear wall, or a horizontal surface e.g. underneath number plate light trim/cross bar. The barrel camera inside the camera housing can be removed and spun/upside down to ensure the camera image is always the correct way up.
• Night Vision IR LED's - Number Plate cameras rarely have night vision IR LED's. This camera does! The IR LED's light up the area for the camera to see when there is a low light level. No need to worry about the light blinding following drivers because IR Infra Red light is invisible to the human eye - only the camera will see it.
• Microphone - This reversing camera has an inbuilt microphone. This is sometimes useful for people who install the camera on a monitor with a built-in speaker.
• 4 Pin Connector / Optional RCA Phono Adaptors - The camera uses the most popular 4 pin screw connector to take Video Signal, Audio from the microphone, and Power. Should you wish to convert this to RCA Phono Connection e.g. for an RCA Monitor or Stereo Headunit e.g. Sony/Kenwood/Pioneer you can order a discounted bundle set which has our 4 pin to RCA Adaptor + Power Wire with inline fuse + RCA Coupler.

• Subtle/Hidden Reversing Camera for Number Plate - This camera is one of our smallest, hardest to spot reverse cameras, making it ideal for mounting in the number plate area. Check out our photos to see it fitted to one of our customer's vehicles. 
• Great Image Quality - The camera gives great picture quality thanks to its high-resolution modern PC4089 700tvl image sensor and all-glass composite lens. This is the same combination used on our respected brake light reversing cameras.
• IP68 Waterproof Rating - The ingress protection rating of this camera is IP68. This means it is protected against the very worst weather it will come across.
• Guideline Function ON/OFF Setting - As standard the camera will output static guidelines to assist with lining up whilst parking. These can be removed using the trigger loop next to the cameras connector.
• 150 degree Wide Viewing Angle - Very wide angle lens fitted to provide an extra wide viewing angle to assist in looking out for obstacles around the rear of your vehicle.

• Compact flush-fit adjustable ball/bullet reversing camera (CAM610)
• Vertical flip function for high rear wall or number plate mounting
• 700TVL PC1058 image sensor for a clear, high-resolution image
• Wide 150° viewing angle to help reduce rear blind spots
• 6-layer glass lens with coated filter for accurate colour reproduction
• Static parking guidelines can be switched ON or OFF
• Supplied with both 4-pin aviation and RCA connector wiring
• Fits a 22.5mm hole using the supplied holesaw
• Small, discreet black design blends neatly into bodywork

• Small Black Discreet Reverse Camera - This camera is very small and discreet, which makes it hard to spot.
• Great Image Quality - The camera has a high-quality PC1058 Image Sensor fitted, which returns a 700tvl high-resolution image. Check out our photos of the camera outputting its image to a Monitor (sold separately).
• Wide Viewing Angle - With a 150 degree lens fitted, this camera gives you a lovely wide field of view to help avoid obstacles around the rear of your vehicle.
• Vertical Flip Function allows mounting to Rear Wall OR above Number Plate - We had this camera produced with a function loop that connects in to a jumper on the camera main board to tell it whether you plan to mount the camera against a rear wall, or hanging underneath the number plate light trim. For fitting to the rear wall simply unplug the jumper cap on the white wire loop (see our images). If you are currently watching the camera whilst removing the caps the change won't take effect until the camera has been power cycled (system turned off and back on).
• Static Guideline Function ON/OFF - As standard the guidelines are turned ON, to remove them unplug the jumper cap on the green wire loop (see images). If you are currently watching the camera whilst removing the caps the change won't take effect until the camera has been power cycled (system turned off and back on).
• 4 Pin + RCA Connector Wiring Supplied - This camera has a small connector to help get through the small hole drilled for the bolt that the wire comes through. This then connects in to one of two wiring looms. The first is 4 pin screw aviation type. The second is RCA Phono connector type.
• Increased Reversing Safety - With almost a quarter of vehicle accidents in the UK occur when in reverse, this brilliant little camera will help to reduce blindspots and help to avoid incidents.
• Autosleeper Compatible - It can be used to replace the similar-looking OEM Autosleeper reversing camera. We have had the 3.5mm 4-Pole plug wired up the same way so that it can be simply inserted in to the original socket. One thing we have heard back from customers is that the Autosleeper camera can be tricky to remove as the plastic trim has mastic fixing it to the body of the Motorhome. I have heard of people either very carefully cutting the mastic away to give them access to the rear bolt, or cutting the rear cupboard at the location of the camera to give access from the rear (this method required very careful measurements to ensure the hole lands to the rear of the camera). The connectors plastic moulding may need filing down in order for the plug to insert fully in to the original socket.

• Small White Discreet Reverse Camera - This camera is very small and discreet, which makes it hard to spot when installed against a white vehicle such as a Motorhome or Van.
• Great Image Quality - The camera has a high-quality PC1058 Image Sensor fitted, which returns a 700tvl high-resolution image. Check out our photos of the camera outputting its image to a Monitor (sold separately).
• Wide Viewing Angle - With a 150 degree lens fitted, this camera gives you a lovely wide field of view to help avoid obstacles around the rear of your vehicle.
• Vertical Flip Function allows mounting to Rear Wall OR above Number Plate - We had this camera produced with a function loop that connects in to a jumper on the camera main board to tell it whether you plan to mount the camera against a rear wall, or hanging underneath the number plate light trim. For fitting to the rear wall simply unplug the jumper cap on the white wire loop (see our images). If you are currently watching the camera whilst removing the caps the change won't take effect until the camera has been power cycled (system turned off and back on).
• Static Guideline Function ON/OFF - As standard the guidelines are turned ON, to remove them unplug the jumper cap on the green wire loop (see images). If you are currently watching the camera whilst removing the caps the change won't take effect until the camera has been power cycled (system turned off and back on).
• 4 Pin + RCA Connector Wiring Supplied - This camera has a small connector to help get through the small hole drilled for the bolt that the wire comes through. This then connects in to one of two wiring looms. The first is 4 pin screw aviation type. The second is RCA Phono connector type.
• Increased Reversing Safety - With almost a quarter of vehicle accidents in the UK occur when in reverse, this brilliant little camera will help to reduce blindspots and help to avoid incidents.
• Autosleeper Compatible - It can be used to replace the similar-looking (but in black) OEM Autosleeper reversing camera. We have had the 3.5mm 4-Pole plug wired up the same way so that it can be simply inserted in to the original socket. One thing we have heard back from customers is that the Autosleeper camera can be tricky to remove as the plastic trim has mastic fixing it to the body of the Motorhome. I have heard of people either very carefully cutting the mastic away to give them access to the rear bolt, or cutting the rear cupboard at the location of the camera to give access from the rear (this method required very careful measurements to ensure the hole lands to the rear of the camera). The connectors plastic moulding may need filing down in order for the plug to insert fully in to the original socket.

White slimline parking camera, ideal for fitting to a Motorhome or Van. It can be mounted either to the number plate or higher up to give a bird's-eye view. Fitted with a quality 700tvl PC4089 image sensor for good colour replication and a sharp image.

We used to stock a similar reversing camera many years ago.  When we found this one, which had the higher quality image sensor options available we gladly ordered some.  These were always a popular, easy to fit option for people wanting a small, discreet camera.  The actual camera part itself is only 22mm deep and 18mm in height, it is attached to a bracket that is mostly hidden behind the numberplate itself.  You have the option of using screws to attach this, or my preference is either an adhesive sealant, or some very strong tape such as Scotch Red.

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution, but still with IR LED's for night time.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

We used to stock a similar reversing camera many years ago.  When we found this one, which had the higher quality image sensor options available we gladly ordered some.  These were always a popular, easy to fit option for people wanting a small, discreet camera.  The actual camera part itself is only 22mm deep and 18mm in height, it is attached to a bracket that is mostly hidden behind the numberplate itself.  You have the option of using screws to attach this, or my preference is either an adhesive sealant, or some very strong tape such as Scotch Red.

This camera is the latest on the market. One issue with CCD cameras is they need a lot of volume to take the electronics. This means traditionally they were relatively large. New developments mean this is no longer true and this camera is one of the first using this technology. It is designed to mount in the number plate area with its mounting bracket mounted above it.

• 1080P AHD number-plate reversing camera
• Galaxy Core GC2053 CMOS sensor with wide 150° view
• Rotatable housing for vertical or horizontal mounting
• IP69K waterproof design for vans, motorhomes and HGVs
• Optional 4-pin extension cables from 1 m to 20 m

• 1080P AHD number plate frame reversing camera
• Fits cars, vans, motorhomes, pickups and most vehicles with a standard number plate
• Adjustable barrel-style camera to set the ideal viewing angle
• Aspheric all-glass lens with wide 150° diagonal view
• IP69K waterproof housing, proven to withstand the worst the British weather can throw at it
• 4-pin aviation female connector with optional RCA adaptor
• Optional 1–20 m extension cables available
• UK tested and supplied with 2-year warranty

• 1080P AHD white number plate reversing camera with stylish modern design
• Uses the high-performance 2399 AHD starlight sensor for excellent night vision
• Can be fitted in the number plate area or mounted higher up on vans and motorhomes
• Adjustable barrel camera tilts up and down for the perfect viewing angle
• Extra-wide viewing angle for maximum rear visibility
• IP68 waterproof housing, proven to withstand the worst the British weather can throw at it
• Ideal for cars, vans, motorhomes and camper conversions
• Compatible with 1080P AHD monitors only