Small White Bracket Motorhome Reversing Camera | 700TVL CMOS | 4 Pin & RCA | CAM529

Price

£48.00

VAT Included £8.00
Availability IN STOCK
Product Code: CAM529
4 Pin Extension Cable
RCA Extension Cable
4 Pin to RCA Adaptor (See Description)
Quantity
(from 1 to 17)

If you'd like this by

Order within ::

(Please select Next Day Delivery Option - Mainland UK only) Terms Apply

Description

About the small white bracket reverse parking camera

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

The camera is supplied with both a 4-pin screw connector and an RCA phono connector. You can select which to use by swapping at the 6.5 mm disconnect point located about 60 cm back from the camera. Please note the camera also has a non-waterproof power regulator at the same distance — this must be installed in a dry, protected area (for example, inside a tailgate) to prevent premature failure.

The camera is waterproof up to IP68.

There is a trigger loop which can turn guidelines on/off.

Camera works on 12V but if you use the 4 pin connector attachment with a 12V/24V monitor, the monitor reduces the voltage down to 12V. This is the norm, and most 24V systems actually only supply 12V to the camera.

Connectors Info (RCA and 4 Pin)

The camera is supplied with both a 4-pin screw connector and an RCA phono connector. You can choose which to use by changing at the 6.5 mm disconnect point located roughly 60 cm back from the camera.

Please note there is also a non-waterproof power regulator at the same distance. This must be positioned in a dry, protected location (for example inside a tailgate) to prevent premature failure.

4-Pin to RCA Adaptor Option

Even though this camera is supplied with both connector types as standard, we still offer a discounted 4-pin to RCA adaptor for those who need it. This can be useful in two scenarios:

1) Modern vehicles with CANBUS or pulsed (PWM) reverse feeds
Using a 4-pin cable plus this adaptor lets you take camera power from an ignition feed at the front of the vehicle instead of relying on the reverse light feed. You can still connect a simple reverse-light trigger so the monitor or stereo only wakes up when reverse is selected.

2) Viewing the camera even when not in reverse
If you want to see the camera on demand (for example while driving forward or towing), the adaptor allows you to power the camera independently and view it without needing to be in reverse gear.
Detailed Images

See our general guide to installing 4 pin reversing cameras.  This includes fitting to stereos inc Kenwood / Sony / Pioneer etc.

Fitting guide for 4 pin reversing cameras including to stereo headunits

Image device:- PC4089 CMOS sensor

Resolution: 700 TVL

Mirror/Normal image selectable

Selectable guidelines

NTSC format

IP rating: Ip68

Camera angle: 170 degrees diagonal

HD all glass composite lens

10G vibration rating