Bracket / Dash Mount Monitors for reversing cameras

• 7-inch dash-mounted monitor for reversing and rear view cameras
• Supports up to two cameras via dual 4-pin aviation inputs
• Slimline dash monitor design with built-in sunshade to reduce glare
• High-quality 7" digital LCD panel with clear image and good colour reproduction
• Compatible with 12V and 24V vehicle systems
• Regulated 12V output to cameras for protection and reliability
• Optional on-screen parking guidelines with reverse trigger activation
• Interval mode to automatically switch between two camera channels
• Supplied with full wiring harness and power options
• Covered by the REVCAMUK 2-year guarantee with UK-based support

• Compact 5-inch dash-mount monitor for reversing, rear-view and side cameras
• Supports up to three camera inputs with manual or trigger-based switching
• High-resolution 800 x 480 digital LCD panel for a bright, clear image
• Works on both 12V and 24V vehicles, suitable for cars, vans, motorhomes and HGVs
• Supplied with heavy-duty U-bracket, with optional mounting and power accessories available
• Covered by the RevCam UK 2-year guarantee with lifetime after-sales support

• 7-inch heavy-duty dash-mounted monitor for reversing and auxiliary cameras
• Supports up to three cameras via 3 x 4-pin aviation inputs
• High-quality 7" digital LCD panel with clear image and good colour reproduction
• Automatic screen dimming using built-in ambient light sensor
• Removeable sunshade to reduce glare in bright conditions
• Suitable for both 12V and 24V vehicle electrical systems
• Regulated 12V output to protect connected cameras
• Supplied with full wiring harness, trigger wires and mounting bracket
• Covered by the REVCAMUK 2-year guarantee with UK-based support

• 7 inch dash / stand mount reversing camera monitor with removable sunshade
• 2 channel system with 4 pin aviation inputs for CVBS cameras
• Adjustable parking guidelines with metric or imperial display
• Automatic reverse trigger wire for hands free channel switching
• Heavy duty U-bracket supplied as standard
• Optional RCA adaptor cables and alternative mounting brackets available
• Backed by 2 year guarantee and lifetime support

• 7-inch dash-mounted monitor with high-resolution 800 x 480 digital LCD panel
• Dual 4-pin aviation inputs for CVBS reversing, rear-view or side cameras
• Manual channel switching via front buttons or remote, with automatic reverse trigger
• Works on both 12V and 24V vehicles with built-in voltage regulation
• Supplied with quick-release mounting bracket as standard
• Optional power leads, RCA adaptor cables and upgraded brackets available
• Backed by the Revcam UK 2-year guarantee and lifetime support

• Large 9-inch 800 x 480 high-resolution digital LCD monitor
• 2-channel input via 4-pin aviation screw-lock connectors
• Ideal for HGVs, LGVs, large vans and motorhomes
• Automatic reverse trigger wire for seamless channel switching
• Heavy-duty U-bracket included as standard
• Backed by our Revcam UK 2-year guarantee

We brought these in mainly for agricultural customers who either have very dusty environments or where the monitors will be exposed to the elements and covered in rain. See the photo's inside to see how we placed the monitor inside a fish tank to demonstrate its abilities.

This is a very flexible monitor, enabling upto 4 cameras to be displayed on the screen at one time. If you only have 2 cameras attached it can view both of these at the same time. Power to the cameras come from the monitor, meaning you don't need to wire in any additional power leads. Most people that order these have 2 side cameras and 2 rear view cameras giving massive coverage. This monitor works with our 4 pin cameras and 4 pin cables.

Upto 4 Inputs! 10" Screen! Split screen functions and High Res Screen whilst monitor powers up all the cameras! Works with 12-24V systems.

• 7-inch 1024 x 600 IPS high-definition digital display
• Compatible with AHD 720P / 960P / 1080P and standard CVBS cameras
• 2-channel input with automatic reverse trigger switching
• Wide viewing angle with bright, sharp image clarity
• Suitable for 12V and 24V vehicles
• Dash-mount bracket included with optional mounting upgrades available
• Backed by our 2-year guarantee and long-term support

• High Quality 7" IPS Panel Display - This is the most popular size display for vehicle monitors. Really colourful and sharp 1024*600 pixel 7 inch IPS display. IPS panels are seen in the gaming community thanks to their high definition, ability to display bright-vivid colours, and their wide viewing-angle (allows clear visibility even when you are positioned at an angle to the display).
• 3 Channel Inputs (up to 1080P AHD) - The monitor wiring is fitted with 3 channel inputs, which are controlled either via the Ch1, Ch2, and Ch3 buttons on the display, the remote control, or via trigger activation wires, e.g. reverse light (3 wires supplied if you wish to use).
• Removable Sunshade - If you have a bright cabin in your vehicle, you can use the supplied sunshade to prevent glare on the screen. This is easily removable at any time.
• Works on 12V and 24V Vehicles - This monitor can work on Vans, Motorhomes, HGL, LGV, etc., thanks to the 12-32V working voltage range. It will protect the cameras by ensuring a stabilised 12V supply is sent down the 4-pin cable.  
• Heavy-Duty Side Mounting Bracket Supplied - This monitor has a heavy-duty "u" bracket that attaches to the side mounting points. This durable bracket strongly holds the monitor securely in even the bumpiest environments. The bracket can be inverted to hang the monitor from the ceiling (if desired).
• Optional Brackets Available to fit Rear - The monitor is equipped with a rear central channel, allowing our large range of vehicle monitor mounting brackets to be fitted.

• Large High Quality 9" IPS Panel Display - This is one of our larger monitors, ideal for vehicles with a large dashboard. Really colourful and sharp 1024*600 pixel 9 inch IPS display. IPS panels are seen in the gaming community thanks to their high definition, ability to display bright-vivid colours, and their wide viewing-angle (allows clear visibility even when you are positioned at an angle to the display).
• 3 Channel Inputs (up to 1080P AHD) - The monitor wiring is fitted with 3 channel inputs, which are controlled either via the Ch1, Ch2, and Ch3 buttons on the display, the remote control, or via trigger activation wires, e.g. reverse light (3 wires supplied if you wish to use).
• Removable Sunshade - If you have a bright cabin in your vehicle, you can use the supplied sunshade to prevent glare on the screen. This is easily removable at any time.
• Works on 12V and 24V Vehicles - This monitor can work on Vans, Motorhomes, HGL, LGV, etc., thanks to the 12-32V working voltage range. It will protect the cameras by ensuring a stabilised 12V supply is sent down the 4-pin cable.
• Heavy-Duty Side Mounting Bracket Supplied - This monitor has a heavy-duty "u" bracket that attaches to the side mounting points. This durable bracket strongly holds the monitor securely in even the bumpiest environments. The bracket can be inverted to hang the monitor from the ceiling (if desired).
• Optional Brackets Available to fit Rear - The monitor is equipped with a rear central channel, allowing our large range of vehicle monitor mounting brackets to be fitted.

• Amazing 7" MIMO 1920x1200 Panel Display - We are very lucky to be able to acquire this monitor from one of our favourite manufacturers. They initially struggled to purchase the MIMO panels, as the minimum order quantity was so excessive. After some consistent persuasion they were finally able to get a sensible number to produce this amazing monitor. This panel is usually used for tablet displays, and as such will show off our range of 1080P AHD Reversing Cameras to their maximum definition.
• 3 Channel Inputs (up to 1080P AHD) - The monitor wiring is fitted with 3 channel inputs, which can be selected between using either a button on the display, the remote control, or via trigger activation wires, e.g. reverse light (3 wires supplied if you wish to use).
• Removable Sunshade - If you have a bright cabin in your vehicle, you can use the supplied sunshade to prevent glare on the screen. This is easily removable at any time. Please note that being a tablet style screen, the glass is more reflective than the matt finish we have on our alternative stand/dash monitors, so if you have a bright cab you would probably require this sunshade to be kept on.
• Works on 12V and 24V Vehicles - This monitor can work on Vans, Motorhomes, HGV, LGV, etc., thanks to the 12-32V working voltage range. It will protect the cameras by ensuring a stabilised 12V supply is sent down the 4-pin cable.  
• Heavy-Duty Side Mounting Bracket Supplied - This monitor has a heavy-duty "u" bracket that attaches to the side mounting points. This durable bracket strongly holds the monitor securely in even the bumpiest environments. The bracket can be inverted to hang the monitor from the ceiling (if desired).
• Optional Brackets Available to fit Rear - The monitor is equipped with a rear central channel, allowing our large range of vehicle monitor mounting brackets to be fitted.

This is a very flexible monitor, enabling upto 4 cameras to be displayed on the screen at one time. If you only have 2 cameras attached it can view both of these at the same time. Power to the cameras come from the monitor, meaning you don't need to wire in any additional power leads. Most people that order these have 2 side cameras and 2 rear view cameras giving massive coverage. This monitor works with our 4 pin cameras and 4 pin cables.

4 Channel Split Screen Monitor that can accept up to 4 vehicle side view, rear view, and reversing cameras. Full-screen or split in one of various arrangements on screen. Advanced menu system to make alterations to settings. Full screen, 50/50 split, three-way, quad pattern split screen display. Can accept CVBS, 720P/960P/1080P AHD signal cameras. Heavy-Duty U Bracket. Instructions included, see download section of listing.

Ideal for pedestrian and cyclist safety, this large 10 inch IPS panel display with touchscreen allows you to mark out boxes to provide alerts when a pedestrian or cyclist enters that area of concern. The monitor features basic recording at 360P when inserting up to a 256GB SD card. The touchscreen works well, and makes adjusting the settings and zones easier compared to using a remote control (which is also provided). Optimal set up is using 2x side cameras, 1 rear reversing camera, and 1 front facing camera.