0 £0.00
Fiat Ducato, Citroen Relay, Peugeot Boxer, Vauxhall Movano brake light reversing camera - slimline version | CAM1722
Description
Fiat Ducato, Citroen Relay, Peugeot Boxer & Vauxhall Movano Slimline Brake Light Reversing Camera (CVBS 700 TVL) | CAM1722This CVBS slimline brake light camera is designed as a direct replacement for the upper brake light unit on Fiat Ducato, Citroen Relay, Peugeot Boxer and 2022+ Vauxhall Movano. It gives you a cleaner, slimmer appearance compared with the bulkier factory-style housings, while adding a clear and reliable reversing view that works with the vast majority of aftermarket systems. The camera uses our long-proven PC4089 image sensor, paired with a high-quality all-glass composite lens, producing a clear and reliable 700 TVL CVBS image with good colour and contrast. We have used this sensor for many years because it is consistent and dependable, and it outperforms a lot of the lower-down versions commonly found in brake light cameras. Two mounting versions are available: a rear bolt-through version and a front-screw version, so you can choose the style that best suits your vehicle and fitting preference. Key featuresFactory-style slimline design – Replaces the upper brake light with a more modern, slim housing that looks like it could have come from the factory. Direct replacement using original location – The unit sits exactly where the factory brake light goes, with no drilling through metalwork. Choose either the rear bolt-fix version or the front-screw version for a secure, tidy installation. Clear and reliable CVBS (NTSC) image from upgraded PC4089 sensor – Outputs a standard CVBS NTSC video signal so it works with the vast majority of aftermarket reversing camera monitors, dash displays and head units. The higher-grade PC4089 sensor delivers a clear and reliable 700 TVL picture with natural colours and good contrast, chosen for long-term performance. High-quality all-glass composite lens – Uses an all-glass composite lens rather than the more common/cheaper plastic-glass lenses seen elsewhere. It holds its clarity over time and avoids the UV sun-fade and “milky” look we see far too often with cheaper alternatives. 160° diagonal wide viewing angle – Offers a wide and clear view for reversing or lining up to a pitch, giving good coverage behind the vehicle. IP68 waterproof construction – IP68 waterproof housing, proven to withstand the worst the British weather can throw at it, whether the van is parked on the drive or working hard all year round. Two mounting version options – Before ordering you can choose between the bolt-through rear-fixing version or the front-screw version. Both are designed for a solid fit and a neat finish. Optional 4-pin to RCA adaptor – Available as an option for connecting to aftermarket head units or displays that use standard RCA/phono video inputs. Optional extension cables – 5 m to 15 m 4-pin aviation extension cables are available to suit everything from standard panel vans through to longer motorhome conversions. UK tested and supplied with a 2-year Revcamuk guarantee – With almost 20 years in the reversing camera industry, we have worked with a lot of factories. These slimline brake light cameras come from one of the best manufacturers we use and are fully supported with our 2-year Revcamuk guarantee. If a non-user-damage fault develops within two years, we will replace the camera to keep you reversing safely. Vehicle fitment Compatible with the following vehicle models:
What’s in the box
Add a monitor and cable with one of our premium brake light reversing camera kitsIf you would like a complete reversing camera kit for your van, including a display, the kits below pair this slimline brake light camera with a suitable monitor and cabling, all backed by our 2-year guarantee. |
Detailed Images
Fitted Images of Brake Light Reversing Camera to Ducato Boxer and Relay vans
Image of brake light camera cables including optional upgrades
Dimensions Image of Brake Light Reversing Camera to fit Citroen Relay, Peugeot Boxer and Fiat Ducato
Our reverse camera for the brake light will fit the same entry point/fixings as the original camera. The camera may looks slightly different to the one originally fitted, but will still perform well.
There could be a number of reasons they may be cheaper than us, the most common are below :
- Rejected Production Runs - This is more common on the marketplaces where there are a lot of non-UK businesses (although the stock is often in the UK). When one of the larger factories produces a camera they will age-test a batch to ensure that the quality is sufficiently high to be able to send to their big customers (like us). If a production run fails this test with a high enough number having issues, the whole batch is often sold off for "recycling" the components. Sadly, these get placed in a container setting sail to the UK and other destinations, and eventually listed on a marketplace at crazy low prices - lower than we can buy hundreds at a time for. Sometimes you are lucky, sometimes you are not, depending on how badly the batch failed.
- Cheaper Components Used - There are different standards of image sensor, support chips, lenses and camera bodies. We opt for better quality; the results speak for themselves. We didn't earn our reputation by buying as cheap as we could; it's not what our customers want. Although at the same time we really do keep our prices as low as possible. The cheaper prices help us to sell more volume, which means we can bring the cameras in by ocean shipping, saving freight costs, which we pass to the consumer.
- Produced by a "Factory for the day" - We have seen some shocking quality cameras sent to us over the years by customers. There is a phenomenon in China where someone can rent factory space for a day or two in order to complete a production run. Often this is a factory employee that is trying to go it alone and start his own business. Sadly, they don't often have the best engineers, they usually buy the lowest price/quality components, have the lowest standard of production line worker, and they can't afford to reject a bad production run. These usually either end up on a Marketplace or sold directly from a Chinese website.
In short, trust us to find the best quality and support you for safety and peace of mind.
See our general guide to installing 4 pin reversing cameras. This includes fitting to stereos inc Kenwood / Sony / Pioneer etc.
| Sensor: 1/3" PC4089 CMOS |
