0 £0.00
Renault Kangoo and Mercedes Citan Brake Light Reversing Camera | CAM739
Description
Renault Kangoo & Mercedes Citan Brake Light Reversing Camera (CVBS 700 TVL) | CAM739This brake light reversing camera is designed as a direct, vehicle-specific replacement for the original upper brake light on Renault Kangoo and Mercedes Citan vans. It fits into the factory brake-light position to retain a clean OEM appearance while adding a clear, dependable reversing image compatible with the majority of aftermarket monitors and head units. The camera uses our long-proven PC4089 high-resolution CVBS image sensor, paired with a high-quality all-glass composite lens. This sensor has been chosen for its reliability and consistent performance, delivering a clear 700 TVL image with good colour and high resolution to assist with safe, accurate reversing. Key featuresOEM factory appearance – Designed to replace the original brake light, keeping the rear of the vehicle looking factory standard with no visible aftermarket modifications. Very clear image using upgraded PC4089 sensor – Outputs a standard CVBS NTSC video signal, making it compatible with most aftermarket reversing camera monitors, mirror displays and aftermarket head units. The PC4089 sensor provides a high-res 700 TVL image. High-quality all-glass composite lens – Uses a proper all-glass lens rather than cheaper plastic alternatives, preventing UV fade and the cloudy appearance that can develop over time. Wide 170° diagonal viewing angle – Provides a wide view behind the vehicle to help identify and avoid obstacles, posts and pedestrians when reversing. IP69K waterproof construction – Fully sealed housing rated to IP69K, proven to withstand the worst the British weather can throw at it, including heavy rain and road spray. Adjustable camera angle – The camera head can be tilted slightly during installation to achieve the optimum viewing angle behind the vehicle. 4-pin connector with optional RCA adaptor – Supplied with a 4-pin aviation connector as standard. Optional adaptor cables are available for connection to RCA-input displays or head units. UK tested and supplied with a 2-year Revcamuk guarantee – With almost 20 years of experience supplying reversing camera systems, these cameras are fully supported by our 2-year guarantee for peace of mind and reliable aftersales support. Vehicle fitment Compatible with the following vehicle models:
Fits the upper centre brake-light position on both models. What’s in the box
|
Detailed Images
CAM739 brake light reversing camera showing fitment position on Renault Kangoo and Mercedes Citan vans (2007–2021
Mercedes Citan and Renault Kangoo brake light reversing camera shown with optional 4-pin extension cable and optional RCA adaptor.
Renault Kangoo and Mercedes Citan brake light reversing camera with integrated camera on the right, shown with dimensions 231 mm wide and 36 mm high, designed as an OEM-style direct replacement.
The reverse camera will fit where the original high-level stop lamp was on your Kangoo or Citan van. This will still function as a brake light, as well as giving enhanced safety with the increase in visibility.
There could be a number of reasons they may be cheaper than us, the most common are below :
- Rejected Production Runs - This is more common on the marketplaces where there are a lot of non-UK businesses (although the stock is often in the UK). When one of the larger factories produces a camera they will age-test a batch to ensure that the quality is sufficiently high to be able to send to their big customers (like us). If a production run fails this test with a high enough number having issues, the whole batch is often sold off for "recycling" the components. Sadly, these get placed in a container setting sail to the UK and other destinations, and eventually listed on a marketplace at crazy low prices - lower than we can buy hundreds at a time for. Sometimes you are lucky, sometimes you are not, depending on how badly the batch failed.
- Cheaper Components Used - There are different standards of image sensor, support chips, lenses and camera bodies. We opt for better quality; the results speak for themselves. We didn't earn our reputation by buying as cheap as we could; it's not what our customers want. Although at the same time we really do keep our prices as low as possible. The cheaper prices help us to sell more volume, which means we can bring the cameras in by ocean shipping, saving freight costs, which we pass to the consumer.
- Produced by a "Factory for the day" - We have seen some shocking quality cameras sent to us over the years by customers. There is a phenomenon in China where someone can rent factory space for a day or two in order to complete a production run. Often this is a factory employee that is trying to go it alone and start his own business. Sadly, they don't often have the best engineers, they usually buy the lowest price/quality components, have the lowest standard of production line worker, and they can't afford to reject a bad production run. These usually either end up on a Marketplace or sold directly from a Chinese website.
In short, trust us to find the best quality and support you for safety and peace of mind.
See our general guide to installing 4 pin reversing cameras. This includes fitting to stereos inc Kenwood / Sony / Pioneer etc.
| Image Sensor : 1/3" colour Super CMOS |
