0 £0.00
VW Volkswagen Caddy Reversing Camera for Brake Light | CAM1900
Description
Volkswagen Caddy Brake Light Reversing Camera (CVBS 700 TVL) | CAM1900This CVBS version of the CAM1900 brake light reversing camera is designed as a factory-fit upgrade for the Volkswagen Caddy (2004 – 2020). It replaces the original upper brake light with a purpose-built housing that integrates a reversing camera, retaining a clean OEM-style appearance while adding a clear and reliable rear view. The camera uses our long-proven PC4089 image sensor, paired with a high-quality all-glass composite lens, producing a clear and reliable 700 TVL CVBS image with good colour and contrast. We’ve used this sensor for many years because we know it performs reliably to a high standard and outperforms many lower-down versions commonly fitted to brake light cameras. The wide 170° diagonal viewing angle gives generous rear coverage, making parking and manoeuvring easier in tight spaces. If you have a later 2020+ model check out our 2020+ VW Caddy Brake Light Reversing Camera Listing. Key featuresDirect replacement for the OEM brake light – Designed to replace the factory brake light using the original mounting points. No drilling required, with all fixings and a sealing gasket supplied for a proper watertight installation. Clear and reliable CVBS (NTSC) image from upgraded PC4089 sensor – Outputs a standard CVBS NTSC video signal compatible with the vast majority of aftermarket reversing camera monitors, dash displays and head units. The PC4089 sensor delivers a clear and reliable 700 TVL picture with natural colours and good contrast, selected for long-term performance. High-quality all-glass composite lens – Uses a proper all-glass composite lens rather than plastic. This helps maintain sharpness over time and avoids the UV sun-fade and softening issues commonly seen with cheaper lenses. 170° diagonal wide viewing angle – Provides a wide, usable rear view when reversing, ideal for parking, narrow driveways and getting in to tight spots. Selectable parking guidelines – Loop-wire-selectable on/off guidelines enable the grid overlay to be enabled or disabled based on preference. IP69K waterproof construction – IP69K sealed housing, proven to withstand the worst the British weather can throw at it and suitable for vehicles that live outdoors year-round. 4-pin aviation connector – Supplied with a standard 4-pin aviation connector for use with most aftermarket CVBS monitors and extension cables. Optional adaptors and extension cables – Optional 4-pin to RCA adaptors and 5 m to 15 m extension cables are available for different monitor inputs and longer installations. UK tested and supplied with a 2-year Revcamuk guarantee – With almost 20 years in the reversing camera industry, we’ve worked with a wide range of factories. This brake light camera comes from one of the best manufacturers we use and is fully supported with our 2-year Revcamuk guarantee. If a non-user-damage fault develops within two years, we’ll replace the camera to keep you reversing safely. Vehicle fitment Compatible with the following vehicle model:
Replaces the factory brake light and includes all fixings, gasket and installation instructions for a clean OEM-style finish. What’s in the box
Add a monitor and cable with one of our premium brake light reversing camera kitsIf you would like a complete reversing camera kit for your Volkswagen Caddy, including a suitable display and cabling, the kits below pair this camera with compatible monitors and are all backed by our 2-year guarantee. |
Detailed Images
Brake light reversing camera designed for VW Caddy vans
Brake light reversing camera for Volkswagen Caddy (2004–2020), showing the camera unit with power lead, optional 4-pin extension cable, and optional RCA adaptor options – REVCAMUK.
Brake light reversing camera for Volkswagen Caddy (2004–2020) with dimensions shown, providing a direct replacement for the factory brake light housing – REVCAMUK.
The reverse camera will fit where the original high-level stop lamp was. This will still function as a brake light, as well as giving enhanced safety with the improved rear vision.
There could be a number of reasons they may be cheaper than us, the most common are below :
- Rejected Production Runs - This is more common on the marketplaces where there are a lot of non-UK businesses (although the stock is often in the UK). When one of the larger factories produces a camera they will age-test a batch to ensure that the quality is sufficiently high to be able to send to their big customers (like us). If a production run fails this test with a high enough number having issues, the whole batch is often sold off for "recycling" the components. Sadly, these get placed in a container setting sail to the UK and other destinations, and eventually listed on a marketplace at crazy low prices - lower than we can buy hundreds at a time for. Sometimes you are lucky, sometimes you are not, depending on how badly the batch failed.
- Cheaper Components Used - There are different standards of image sensor, support chips, lenses and camera bodies. We opt for better quality; the results speak for themselves. We didn't earn our reputation by buying as cheap as we could; it's not what our customers want. Although at the same time we really do keep our prices as low as possible. The cheaper prices help us to sell more volume, which means we can bring the cameras in by ocean shipping, saving freight costs, which we pass to the consumer.
- Produced by a "Factory for the day" - We have seen some shocking quality cameras sent to us over the years by customers. There is a phenomenon in China where someone can rent factory space for a day or two in order to complete a production run. Often this is a factory employee that is trying to go it alone and start his own business. Sadly, they don't often have the best engineers, they usually buy the lowest price/quality components, have the lowest standard of production line worker, and they can't afford to reject a bad production run. These usually either end up on a Marketplace or sold directly from a Chinese website.
In short, trust us to find the best quality and support you for safety and peace of mind.
See our general guide to installing 4 pin reversing cameras. This includes fitting to stereos inc Kenwood / Sony / Pioneer etc.
| Image Sensor: 1/3” COLOR Super CMOS |
Related Products
2003-2019 VW Volkswagen Caddy Reversing Camera Brake Light kit with 7" Mirror Monitor - PM39BLP
£190.00
VAT Included
£31.67 
2003-2019 VW Volkswagen Caddy Reverse Camera Brake Light kit with 5" Monitor - PM59BLP
£190.00
VAT Included
£31.67 
2003-2019 VW Volkswagen Caddy Reversing Camera Brake Light kit with 7" Monitor Display - PM69BLP
£195.00
VAT Included
£32.50 
