Products Map

We have instances of people using a 24V vehicle with a Phono RCA based cameras and cables. In these circumstances, you would require a dropper for the camera supply to regulate the output for the camera down to 12V. We also sell these to people that want to protect their phono cameras from any voltage fluctuations on 12V systems. These are only suitable for powering a camera and not a complete system (all of our premium systems have voltage regulators built-in already).

• Our 2M length 4 pin top quality extension cable for reversing cameras. 
• Fully waterproof connection, comes with screw locking collar that compresses the connection against the rubber O ring inside.
• Our extension cables are made from pure copper (not the cheaper CCA/CCS which is prone to failure).
• The cable has screening around the video signal wire, as well as aluminium foil around covering all of the wires inside the cable - to protect against outside interference, as well as allowing you to coil up any excess cable.
• This cable is suitable for the latest range of 1080P AHD reversing cameras.
• This cable is sometimes known as a 4 pin aviation connector cable.

This cable allows you to have 3 cameras go across to the trailer/caravan.  Simply choose the 4 pin cables you require from here: 4 Pin Cables

• Our 3M length 4 pin top quality extension cable for reversing cameras. 
• Fully waterproof connection, comes with screw locking collar that compresses the connection against the rubber O ring inside.
• Our extension cables are made from pure copper (not the cheaper CCA/CCS which is prone to failure).
• The cable has screening around the video signal wire, as well as aluminium foil around covering all of the wires inside the cable - to protect against outside interference, as well as allowing you to coil up any excess cable.
• This cable is suitable for the latest range of 1080P AHD reversing cameras.
• This cable is sometimes known as a 4 pin aviation connector cable.

This cable allows you to have 4 cameras go across to the trailer/caravan.  Simply choose the 4 pin cables you require from here: 4 Pin Cables

This will convert our 4 pin reversing camera cable in to a conventional RCA/2.1mm Red/Black power connection if you wish to connect an RCA Phono camera on to 4 pin cabling.

Adaptor Cable designed to allow a phono/RCA based reversing camera on to a 4 pin aviation connector cabled system. This adaptor is approximately 100CM in length.

Female 4 Pin aviation connector to yellow video signal RCA Phono male plug, and 2.1/5.5mm DC plug for power.

Adaptor Cable designed to allow a phono/RCA based reversing camera on to a 4 pin aviation connector cabled system. This adaptor is approximately 100CM in length.  

Female 4 Pin aviation connector to yellow video signal RCA Phono male plug, white audio signal RCA Phono male plug, and 2.1/5.5mm DC plug for power. 

This will convert our 4 pin reversing cameras to a conventional RCA/2.1mm DC connection if you wish to connect to an RCA monitor or stereo headunit

This will convert our 4 pin cameras to a conventional RCA/2.1mm DC connection if you ever change to an RCA input monitor.

This will convert our 4 pin cameras to a conventional RCA/2.1mm DC connection if you ever change to an RCA input monitor.

Sometimes you wish to split one power supply cable so that it powers four separate devices eg four phono/RCA based reversing cameras. This cable allows you to do so.

This monitor is great for Car owners or those on a budget who can't fit a 7" screen on their dash or who don't want to replace their rear view mirror. The simplicity is great. There are no control boxes or filter boxes.  This monitor comes with two mounts that can be interchanged - one for dash mounting with a self adhesive pad and one for suction mount.

• Comes with a 5 inch high resolution digital panel heavy duty monitor.
• Comes with two of our high spec bracket cameras, that are fitted with the high performance Sony 1/3" CCD 700TVL image sensors.
• The camera brackets are made from painted stainless steel, which avoids the rusting you will see on mild steel brackets that are commonly sold elsewhere.
• This kit comes with a 2 year guarantee from us - REVCAMUK. Our reputation on forums and groups will show how trusted we are to look after our customers.
• The parts that make up this kit are all sourced from the best factories that we have found across our many years of experience. We don't source the cheapest parts, we source based on reliability and quality.
• This kit can be used with both 12V and 24V vehicles. The voltage to the reverse camera is regulated by the monitor.
• Our extension cables are high quality, with the inner cores consisting of pure copper.

• Comes with a 5 inch high resolution digital panel heavy duty monitor.
• Comes with two of our high spec bracket cameras, that are fitted with the high performance Sony 1/3" CCD 700TVL image sensors.
• The camera brackets are made from painted stainless steel, which avoids the rusting you will see on mild steel brackets that are commonly sold elsewhere.
• This kit comes with a 2 year guarantee from us - REVCAMUK. Our reputation on forums and groups will show how trusted we are to look after our customers.
• The parts that make up this kit are all sourced from the best factories that we have found across our many years of experience. We don't source the cheapest parts, we source based on reliability and quality.
• This kit can be used with both 12V and 24V vehicles. The voltage to the reverse camera is regulated by the monitor.
• Our extension cables are high quality, with the inner cores consisting of pure copper.

• This reversing camera kit comes with a stand on dash monitor display, fitted with a high quality 5" LCD panel. This monitor comes with a "U" bracket side mounting bracket, other mounts can be added using the drop down menu - these other brackets fit the central rear channel.
• Comes with a black diamond shaped reversing camera, fitted with a top spec image sensor - the PC4089 700TVL.
• Fitted with a high quality 150 degree wide angle lens - the same all glass composite as we use in our brake light cameras, which avoids the gradual fading over time compared to the cheaper 2xglass, 2xplastic lenses commonly fitted elsewhere.
• Designed to be mounted on the rear wall of a vehicle - ideally high up.
• Can be adjusted to look downwards, or backwards.
• New product for 2023, sure to be popular with Motorhome and Van owners
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• Comes with a 5 inch high resolution digital panel heavy duty monitor.
• Wide choice of mounting options for the monitor (see images/drop down menu).
• Suitable for both 12V and 24V vehicles.
• Avoids CANBUS issue, as the monitor provides power to the camera.
• Various power options eg lighter plug/fuse taps (see further down for details).
• Comes with a license plate reversing camera, fitted with the 600TVL PC1058 premium CMOS image sensor.
• Fitted with a very wide angle (150 degrees) lens - ideal for parking.
• Premium Aspheric Lens - means that despite the extra wide angle, it minimises the "fish bowl" effect you see on cheaper cameras.
• Traditionally this style of camera has caused us and others a nightmare in terms of waterproofing (or lack of). The factory who produces this has done an amazing job and we have yet to have one leak after selling hundreds. The price of these to us are double what we would pay for most cameras, but they are the only factory that we trust with this style design.
• Waterproof rating of this camera is IP69K - the highest possible.
• Easy to install, with a range of power options. Just one power connection powers the system.
• Our extension cables are high quality, with the inner cores consisting of pure copper.
• This kit comes with a 2 year guarantee from us - REVCAMUK. Our reputation on forums and groups will show how trusted we are to look after our customers.

• This reversing camera kit comprises of a mini black bracket reverse camera. Plus a top quality high resolution dash monitor.
• This dash monitor uses a high quality 5 inch LCD digital panel, that gives great colour and brightness.
• This reversing camera uses a top quality PC4089 700TVL image sensor, combined with the all glass composite lenses (the same as we use with our brake light cameras), that we had the same factory make these reversing cameras with the same setup.
• The PC4089 sensor is one of the new generation of CMOS, which costs less to produce than CCD, but still has very good performance. We are then able to pass along the savings to you.
• The camera is fitted with a very wide angle lens, to be able to easily see all around the rear of the vehicle.

• This reversing camera kit comprises of a mini white bracket reverse camera. Plus a top quality high resolution dash monitor.
• This dash monitor uses a high quality 5 inch LCD digital panel, that gives great colour and brightness.
• This reversing camera uses a top quality PC4089 700TVL image sensor, combined with the all glass composite lenses (the same as we use with our brake light cameras), that we had the same factory make these reversing cameras with the same setup.
• The PC4089 sensor is one of the new generation of CMOS, which costs less to produce than CCD, but still has very good performance. We are then able to pass along the savings to you.
• The camera is fitted with a very wide angle lens, to be able to easily see all around the rear of the vehicle.

• Comes with a 5 inch high resolution digital panel heavy duty monitor.
• Wide choice of mounting options for the monitor (see images/drop down menu).
• Suitable for both 12V and 24V vehicles.
• Avoids CANBUS issue, as the monitor provides power to the camera.
• Various power options eg lighter plug/fuse taps (see further down for details).
• Comes with a numberplate frame reversing camera, fitted with the 600TVL PC1058 premium CMOS image sensor.
• Fitted with a very wide angle (150 degrees) lens - ideal for parking.
• Premium Aspheric Lens - means that despite the extra wide angle, it minimises the "fish bowl" effect you see on cheaper cameras.
• Traditionally this style of camera has caused us and others a nightmare in terms of waterproofing (or lack of). The factory who produces this has done an amazing job and we have yet to have one leak after selling hundreds. The price of these to us are double what we would pay for most cameras, but they are the only factory that we trust with this style design.
• Waterproof rating of this camera is IP69K - the highest possible.
• Easy to install, with a range of power options. Just one power connection powers the system.
• Our extension cables are high quality, with the inner cores consisting of pure copper.
• This kit comes with a 2 year guarantee from us - REVCAMUK. Our reputation on forums and groups will show how trusted we are to look after our customers.

• This reversing camera kit comprises of a behind number plate bracket reverse camera. Plus a top quality high resolution dash monitor.
• This dash monitor uses a high quality 5 inch LCD digital panel, that gives great colour and brightness.
• The behind number plate bracket reversing camera has had an update for 2023. We have been so impressed with the quality of the PC4089 700TVL image sensor, combined with the all glass composite lenses (the same as we use with our brake light cameras), that we had the same factory make these reversing cameras with the same setup.
• The PC4089 sensor is one of the new generation of CMOS, which costs less to produce than CCD, but still has very good performance. We are then able to pass along the savings to you.
• The camera is fitted with a very wide angle lens, to be able to easily see all around the rear of the vehicle.

• This reversing camera kit comprises of a bolt type number plate reverse camera, designed to fit to the number plate light area of your vehicle. Plus a top quality high resolution dash monitor.
• This dash monitor uses a high quality 5 inch LCD digital panel, that gives great colour and brightness.
• The bolt type number plate reversing camera has had an update for 2023. We have been so impressed with the quality of the PC4089 700TVL image sensor, combined with the all glass composite lenses (the same as we use with our brake light cameras), that we had the same factory make these reversing cameras with the same setup.
• The PC4089 sensor is one of the new generation of CMOS, which costs less to produce than CCD, but still has very good performance. We are then able to pass along the savings to you.
• The camera fixes to the vehicle via a bolt and nut, which the wire travels through in to the vehicle.
• The camera is fitted with a very wide angle lens, to be able to easily see all around the rear of the vehicle.

• Comes with a 5 inch high resolution digital panel heavy duty monitor.
• Comes with one of our high spec bracket reverse cameras, which is fitted with the high performance Sharp 1/3" CCD 600TVL image sensor.
• The camera brackets are made from polished stainless steel, which avoids the rusting you will see on mild steel brackets that are commonly sold elsewhere.
• This kit comes with a 2 year guarantee from us - REVCAMUK. Our reputation on forums and groups will show how trusted we are to look after our customers.
• The parts that make up this kit are all sourced from the best factories that we have found across our many years of experience. We don't source the cheapest parts, we source based on reliability and quality.
• This kit can be used with both 12V and 24V vehicles. The voltage to the reverse camera is regulated by the monitor.
• Our extension cables are high quality, with the inner cores consisting of pure copper.

• Comes with a 5 inch high resolution digital panel heavy duty monitor.
• Wide choice of mounting options for the monitor (see images/drop down menu).
• Suitable for both 12V and 24V vehicles.
• Avoids CANBUS issue, as the monitor provides power to the camera.
• Various power options eg lighter plug/fuse taps (see further down for details).
• Comes with a flush fitting bumper mount reversing camera, fitted with either the 1/3" Sony CCD 600TVL image sensor, or the 1/3" Sony CMOS 700TVL image sensor.
• Fitted with either a 90 degree lens (Sony CCD option) or a 120 degree lens (Sony CMOS option).
• Waterproof rating of this camera is IP68
• Easy to install, with a range of power options. Just one power connection powers the system.
• Our extension cables are high quality, with the inner cores consisting of pure copper.
• This kit comes with a 2 year guarantee from us - REVCAMUK. Our reputation on forums and groups will show how trusted we are to look after our customers.