Products Map
B0021 - Clearance Front Facing AHD 1080P Camera
*Guarantee of end of line/clearance items can be tricky, if something goes wrong with your purchase if we don't have an equivalent clearance item to offer as a replacement we would offer a refund instead. |
£34.00
VAT Included £5.67Basic Sealant Gun from Duratool | TL-D00281
A sealant gun is very handy to have so that you can seal the cable entry point for the reversing camera wire. Modern sealant/adhesives that coachbuilders use, like Sikaflex 522 will even allow you to bond the camera bracket up with no screws (you will need to remove the camera from the bracket until it sets). They come in a tube that require one of these tools in order to squeeze the sealant out. This is a no frills entry level model. |
£4.80
VAT Included £0.80Basic Soldering Iron with 4x LED lights Duratool 40W | TL-D03287
This is a low cost option for people needing a soldering iron for making connections to vehicle electrics. Soldering is always our preferred option for long lasting, reliable connections, especially when combined with our adhesive lined heat shrink to protect the joint (although you can use our insulation tape for joints made in dry areas). |
£9.60
VAT Included £1.60Behind numberplate reversing camera with 700TVL CMOS sensor | CAM801B-4PIN
We used to stock a similar reversing camera many years ago. When we found this one, which had the higher quality image sensor options available we gladly ordered some. These were always a popular, easy to fit option for people wanting a small, discreet camera. The actual camera part itself is only 22mm deep and 18mm in height, it is attached to a bracket that is mostly hidden behind the numberplate itself. You have the option of using screws to attach this, or my preference is either an adhesive sealant, or some very strong tape such as Scotch Red. |
£36.00
VAT Included £6.00Behind numberplate reversing camera with 700TVL CMOS sensor | CAM801B-RCA
We used to stock a similar reversing camera many years ago. When we found this one, which had the higher quality image sensor options available we gladly ordered some. These were always a popular, easy to fit option for people wanting a small, discreet camera. The actual camera part itself is only 22mm deep and 18mm in height, it is attached to a bracket that is mostly hidden behind the numberplate itself. You have the option of using screws to attach this, or my preference is either an adhesive sealant, or some very strong tape such as Scotch Red. |
£36.00
VAT Included £6.00Behind numberplate reversing camera with premium 700TVL CMOS sensor | CAM801P-4PIN
We used to stock a similar reversing camera many years ago. When we found this one, which had the higher quality image sensor options available we gladly ordered some. These were always a popular, easy to fit option for people wanting a small, discreet camera. The actual camera part itself is only 22mm deep and 18mm in height, it is attached to a bracket that is mostly hidden behind the numberplate itself. You have the option of using screws to attach this, or my preference is either an adhesive sealant, or some very strong tape such as Scotch Red. |
£48.00
VAT Included £8.00Behind numberplate reversing camera with premium 700TVL CMOS sensor | CAM801P-RCA
We used to stock a similar reversing camera many years ago. When we found this one, which had the higher quality image sensor options available we gladly ordered some. These were always a popular, easy to fit option for people wanting a small, discreet camera. The actual camera part itself is only 22mm deep and 18mm in height, it is attached to a bracket that is mostly hidden behind the numberplate itself. You have the option of using screws to attach this, or my preference is either an adhesive sealant, or some very strong tape such as Scotch Red. |
£48.00
VAT Included £8.00Black "Diamond" Reversing Camera | 700TVL | 4 pin connector | CAM918-4Pin
This uses the same image sensor and lens combination that we have fitted to our brake light cameras. Cable length of 5-20M can be selected inside listing. |
£90.00
VAT Included £15.00Black "Diamond" Reversing Camera | 700TVL | 4 pin connector | CAM918-RCA
This uses the same image sensor and lens combination that we have fitted to our brake light cameras. Cable length of 5-20M can be selected inside listing. |
£90.00
VAT Included £15.00Black Dome Reverse Camera | Sony CCD | RCA Phono connector | CAM069B
This is the phono / RCA version of our popular dome reversing camera. Fitted with a 1/3" Sony CCD 700TVL sensor for a great image both day and night. |
£78.00
VAT Included £13.00Black Dome Reversing Camera | Sony CCD | 4 pin connector | CAM070B
This is the same camera as our CAM070W, the only difference being the body of the camera is black. Cable length of 5-20M can be selected inside listing. |
£78.00
VAT Included £13.00Black Narrow Angle Rear View Camera | Sony CCD | 4 Pin Connector | Stainless Steel bracket | CAM063
This is a rear view camera with a more narrow field of view to see following traffic easily. |
£68.00
VAT Included £11.33Black Painted Stainless Steel Bracket to fit the twin lens camera | ACC222B
Ever since we moved to painted stainless steel brackets for most of our bracket cameras more than a decade ago, we have been asked by people who have bought elsewhere if they can buy one of our spare stainless steel brackets to replace their rusted mild steel ones. This listing allows you to purchase the bracket by itself without having to purchase a whole new camera. This version is painted in black. |
£20.00
VAT Included £3.33Black Rear View Camera + Polished S/Steel Bracket | Sony CCD | 4 pin connector | CAM111B-45
We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 45° narrow angle driving / rear view camera. The camera body is painted black, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl. |
£68.00
VAT Included £11.33Black Reversing Camera Polished Stainless Steel bracket | Sony CCD | 4 pin connector | CAM111B-120
We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 120° wide angle parking/reversing camera. The camera body is painted black, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl. |
£68.00
VAT Included £11.33Black Reversing Camera | Sony CCD | 4 pin connector | Stainless Steel bracket | CAM022-V2
This is our biggest selling reversing camera and is supplied as standard with a number of our 12/24V reversing camera kits. The 4 pin connector enables a nice waterproof connection between the 4 pin lead and the camera. The 4 pin leads carry both power and video down the one cable. |
£68.00
VAT Included £11.33Black Reversing Camera | Sony CCD | RCA Phono connector | Stainless Steel bracket | CAM004
Cable length of 5-20M can be selected inside listing. These cameras come with the 1/3" Sony CCD sensor and give a very good image. |
£68.00
VAT Included £11.33Black Roof / Overhang Driving Rear View + Reversing Camera | 4 pin connector | VANCAMTW
This is an updated version of the roof mounted overhang reverse camera. This version has an added rear view camera as a permanent on driving aid. |
£150.00
VAT Included £25.00Black Roof / Overhang Reversing Camera | Sony CCD | 4 pin connector | VANCAMB
This is one of the latest cameras on the market that bypass the problem of lipped doors which mean you can't fit a traditional bracket camera above the doors. This allows you to have a birds eye view still on lots of the modern vans. |
£78.00
VAT Included £13.00Black Sony 1080P AHD Bracket Reversing Camera - (Only works with 1080P AHD compatible monitors/DVR's) | CAM022AHD
We have stocked the Sony CCD version of the bracket reversing camera (from the same factory) for a number of years now. This is the new highest spec version using a relatively new technology called AHD. AHD is an open source Analogue High Definition technology that has become dominant in the industry. |
£84.00
VAT Included £14.00Black Twin Lens Reversing Camera / Rear view | Sony CCD | 4 pin connector | Stainless Steel bracket | CAM222B
These are the latest technology version of the very popular twin lens bracket camera we do. These have a slightly different design bracket, looks more modern. The bracket is made from stainless steel (we are one of the very rare sellers to have this) and will last a long time without rust. The image sensors are 1/3" Sony CCD meaning a better picture day and night compared to the 1/4" Sony and CMOS versions out there. These use the 4 pin connector cables found on our 4 pin connector monitors. |
£118.00
VAT Included £19.67Black Twin Lens Reversing Camera / Rear view | Sony CCD | RCA Phono connectors | Stainless Steel bracket | CAM222BRCA
These are the latest technology version of the very popular twin lens bracket camera we do. These have a slightly different design bracket, looks more modern. The bracket is made from stainless steel (we are one of the very rare sellers to have this) and will last a long time without rust. Both cameras use the latest 960H 700TVL 1/3" Sony CCD image sensors for a great picture. |
£118.00
VAT Included £19.67Brake Light Camera fitted to a Ford Transit Connect
Big thanks to our valued regular trade customer Ross, at RFT Automotive for his photos. These were taken of a recent install that he did on one of his customers Ford Transit Connect vans. It is an unusual brake light camera to sell, quite rare. We did find that the angle of the camera was such, that you could even choose to angle it to view down the road whilst driving. That may or may not appeal to people. |
Bullet Bumper Reversing Camera | Sony CCD | 4 pin connector | CAM038
High resolution CCD camera, with infrared illumination at night, waterproof, 12 month guarantee and a 5m RCA video cable. The important thing about CCD cameras is they give a much better image than the cheaper CMOS versions. Cable length of 5-20M can be selected inside listing. |