Products Map

These have been used for years in the marine industry to get cables inside whilst maintaining water integrity in very tricky environments. This size is suitable for single cameras (not twin lens).

These have been used for years in the marine industry to get cables inside whilst maintaining water integrity in very tricky environments. This size is suitable for two cameras or our twin lens camera.

These have been used for years in the marine industry to get cables inside whilst maintaining water integrity in very tricky environments. This size is suitable for single cameras (not twin lens).

Big thanks to Brian for sending in pictures of our Ford Transit Mk7 brake light reversing camera fitted to his van.  

Big thanks to RFT Automotive for sending some photos of our PM35F kit he had fitted to one of his customers vehicles, a 2011 Peugeot Expert.

Big thanks to Jim for sending us photos of his recent install on to his Fiat Ducato van based motorhome.  He used our kit PM33, which consists of a mirror monitor, and a black twin lens camera fitted with 700TVL 1/3" Sony CCD image sensors.  Safe travels Jim.

Thanks going out to Graham who has shared photos of his recent installation.  He has used a PM51W kit, which consists of a 5 inch dash monitor (mounted upside down in its U bracket), and a white Sony bracket camera, our CAM061.  

Big thanks to one of our customers who sent us a photo of our PM61 reversing camera kit on one of his agricultural vehicles inside a building. We are very happy to have lots of our systems working reliably on the farms.

Big thanks to Richard who sent us a photo of our PM61S silver reversing camera kit on the back of his hobby motorhome.  This was our standard Sony CCD sensor version, which has a lovely picture on the high quality panels used on our 7 inch dash monitors.

Big thankyou to Ian Cross from Witney Car Electrical & Security for sending these images in of an install using our PM64B kit https://www.revcam.uk/pm64b-reversing-camera-kit.html which has a wide angle flush fitting camera, and our 7 inch dash monitor - in this case mounted very smartly near the ceiling. Fantastic looking classic vehicle.

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This camera has been designed to replace your brake light to add a camera.