Products Map
Waeco / Dometic / Baileys / Burstner Motorhome Pre-fitted Cable compatible adaptors 2010+ to Phono/RCA eg Stereo input | CAB00W-RCA+CAB00W4M
These cable adaptors will convert the 2010 onwards Waeco cable fitted on vehicles like Baileys to a single 4 pin socket/plug like we use on our single camera systems. Both front and rear adaptors are provided. These cables are not made by Waeco, just compatible. We only sell these as pairs because we have found the inside of the cables to be wired in differently. |
£18.00
VAT Included £3.00Waeco / Dometic / Baileys / Burstner Motorhome Pre-fitted Cable compatible adaptors 2010+ to Single 4 pin | CAB00W
These cable adaptors will convert the 2010 onwards Waeco cable fitted on vehicles like Baileys to a single 4 pin socket/plug like we use on our single camera systems. Both front and rear adaptors are provided. These cables are not made by Waeco, just compatible. We only sell these as pairs because we have found the inside of the cables to be wired in differently, so you may not be able to just plug in one side and replace just one part, you would need to replace both monitor and camera. |
£18.00
VAT Included £3.00Waeco/Dometic/Baileys/Burstner motorhomes Pre-fitted Cable Adaptors 2010 onwards to Twin 4 pin aviation | CAB001WY
These cable adaptors will convert the 2010 onwards Waeco cable fitted on vehicles like Baileys to twin 4 pin sockets/plugs like we use on the twin camera systems. Both front and rear adaptors are provided. |
£24.00
VAT Included £4.00Wago 2 Pole Terminal Block Splice Connector with lever lock and transparent body | ACC221-2 / 221-412
The Wago inline splice connector is ideal for easily connecting up power wires in dry areas. I have used Wago in my personal life, and I hear from many people how much they enjoy using the brand. These are quicker and more reliable than the old screw connector blocks. The 221 series is the more modern version compared to the 222 series that I fell in love with. These new connectors are much more compact, and have an even easier lever lock to operate, as well as being transparent and able to see that you have a good connection. The only down side is that they do cost more than the old school connection methods. Although the reduction in stress and tools required is probably worth it for a lot of people. |
£0.50
VAT Included £0.08Wago 3 Pole Terminal Block Splice Connector with lever lock and transparent body | ACC221-3 / 221-413
The Wago inline splice connector is ideal for easily connecting up power wires in dry areas. I have used Wago in my personal life, and I hear from many people how much they enjoy using the brand. These are quicker and more reliable than the old screw connector blocks. The 221 series is the more modern version compared to the 222 series that I fell in love with. These new connectors are much more compact, and have an even easier lever lock to operate, as well as being transparent and able to see that you have a good connection. The only down side is that they do cost more than the old school connection methods. Although the reduction in stress and tools required is probably worth it for a lot of people. |
£0.55
VAT Included £0.09Wago Inline Splice Connector with lever lock and transparent body | ACC221-1 / 221-2411
The Wago inline splice connector is ideal for easily connecting up power wires in dry areas. I have used Wago in my personal life, and I hear from many people how much they enjoy using the brand. These are quicker and more reliable than the old screw connector blocks. The 221 series is the more modern version compared to the 222 series that I fell in love with. These new connectors are much more compact, and have an even easier lever lock to operate, as well as being transparent and able to see that you have a good connection. The only down side is that they do cost more than the old school connection methods. Although the reduction in stress and tools required is probably worth it for a lot of people. |
£0.75
VAT Included £0.13Water Resistant Butt Splice Heat Shrinkable Red Crimp Connector | ACC1791
Ideal for external connections thanks to its inner coating of meltable polyamide adhesive. Using a heat gun will ensure that your connection is secure and water tight. |
£0.30
VAT Included £0.05Water Resistant Red Solder Seal Wire Splice Butt Connectors | ACC1771
This is a new type of connection that a few of our customers recommended to us, so we decided to stock. We still prefer to use solder on our own connections, but we have had a play with these and have managed to make some very strong, secure connections. These connectors have a ring of solder inside, which melts when a heat gun is used to heat. The heat shrink also shrinks to secure the joint, as well as internal hot melt adhesive to provide a water resistant seal. |
£0.28
VAT Included £0.05WB60RX - Wireless Reversing Camera Bridge - Receiver (RX) - 60M Version
This 60m receiver box can be used to pair with either a 60m transmitter box, or a 60m wireless camera. There are two technologies of digital wireless that we stock, 60m and 100m, they are both good, but they aren't compatible with each other (ie 60m equipment won't work with 100m and vice versa). |
£60.00
VAT Included £10.00WB60TX - Wireless Reversing Camera Bridge - Transmitter (TX) - 60M Version
This 60m transmitter box can be used to pair with either a 60m receiver box, or a 60m wireless monitor. There are two technologies of digital wireless that we stock, 60m and 100m, they are both good, but they aren't compatible with each other (ie 60m equipment won't work with 100m and vice versa). |
£60.00
VAT Included £10.00WB60TXRX - Wireless Reversing Camera Bridge Complete Set - Transmitter (TX) + Receiver (RX) - 60M Version
This is one of the newest ways of linking up your system to avoid wires running front to back. It is compatible with all our easy fit 4 pin camera systems and can be made compatible with adaptors to all our other phono based systems. It has a transmitter and receiver. The box with the transmitter also powers the reversing camera as well as taking the signal making setting up easier. The receiver box can plug into the monitors 4 pin harness and if ordered with a 1/2/3/5/10/12.5/15/20M 4 pin cable can be moved to different places to make the mounting of the receiver box in a convenient space, same as the sender unit. |
£120.00
VAT Included £20.00£150.65
VAT Included £25.11£115.80
VAT Included £19.30WC6560 - Numberplate 60M Digital Wireless Reversing Camera
Integrated Digital Wireless Camera |
£117.30
VAT Included £19.55White "Diamond" Reversing Camera | 700TVL | 4 pin connector | CAM918W-4Pin
This uses the same image sensor and lens combination that we have fitted to our brake light cameras. Cable length of 5-20M can be selected inside listing. |
£90.00
VAT Included £15.00White "Diamond" Reversing Camera | 700TVL | 4 pin connector | CAM918W-RCA
This uses the same image sensor and lens combination that we have fitted to our brake light cameras. Cable length of 5-20M can be selected inside listing. |
£90.00
VAT Included £15.00White Dome Reverse Camera | Sony CCD | RCA Phono connector | CAM069W
This is the phono / RCA version of our popular dome reversing camera. Fitted with a 1/3" Sony CCD 700TVL sensor for a great image both day and night. |
£78.00
VAT Included £13.00White Dome Reversing Camera | Sony CCD | 4 pin connector | CAM070W
This is a very nice white dome camera that comes with our best image sensor. Cable length of 5-20M can be selected inside listing. These cameras come with the 1/3" Sony CCD sensor and give a very good image. |
£78.00
VAT Included £13.00White Narrow Angle Rear View Camera | Sony CCD | 4 Pin Connector | Stainless Steel bracket | CAM064
This is one of our biggest selling reversing camera and is supplied as standard with a number of our 12/24V reversing camera kits. The 4 pin connector enables a nice waterproof connection between the 4 pin lead and the camera. The 4 pin leads carry both power and video down the one cable. |
£68.00
VAT Included £11.33White Numberplate Reversing Camera | 700TVL | 4 pin connector | CAM105
New for 2024, a white slimline cigar shaped reversing camera with a quality lens and image sensor installed. |
£80.00
VAT Included £13.33White Painted Stainless Steel Bracket to fit the twin lens camera | ACC222W
Ever since we moved to painted stainless steel brackets for most of our bracket cameras more than a decade ago, we have been asked by people who have bought elsewhere if they can buy one of our spare stainless steel brackets to replace their rusted mild steel ones. This listing allows you to purchase the bracket by itself without having to purchase a whole new camera. This version is painted in white. |
£20.00
VAT Included £3.33White Rear View Camera + Polished S/Steel Bracket | Sony CCD | 4 pin connector | CAM111W-45
We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 45° narrow angle driving / rear view camera. The camera body is painted white, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl. |
£68.00
VAT Included £11.33White Reversing Camera with Polished Stainless Steel bracket | Sony CCD | 4 pin connector | CAM111W-120
We have stocked a twin lens camera for more than a decade that uses two cameras with a compact 50mm width case. Because we frequently get asked by customers if they can use just the one in a small bracket, and because we like to listen and learn from customers, we decided to get a bracket specially produced to house our large selection of twin lens camera units. The unit fitted to the camera provided in this listing is the 120° wide angle parking/reversing camera. The camera body is painted white, whilst the bracket is polished stainless steel. The image sensor fitted is Sony's 811, which is our favourite sensor - 1/3" CCD 700tvl. |
£68.00
VAT Included £11.33White Reversing Camera | Sony CCD | 4 pin connector | Stainless Steel bracket | CAM061
This is one of our biggest selling reversing camera and is supplied as standard with a number of our 12/24V reversing camera kits. The 4 pin connector enables a nice waterproof connection between the 4 pin lead and the camera. The 4 pin leads carry both power and video down the one cable. |