Products Map

Page of 8

1 Channel Heavy Duty Suzie Trailer Link for reversing camera - 0.3M + Coil + 0.3M (Cable extensions available) | CAB011 V1 1M

CAB011-V1-1M

This is the original version of our Heavy Duty Trailer Link, the cost of these increased a few years back so we have introduced another listing (V2) for people looking for a cheaper option.  As the V1 and V2 don't fit together we have two separate listings, we have kept the more expensive version 1's in stock to allow existing customers to add on to their existing fleet.  If you haven't used any of our links before and price is a factor then the V2 might be a better option.  I will add that the more expensive V1 in this listing does "feel" more robust, having said that the V2 has had no problems with durability in the years we've ran with them.  

£90.00

VAT Included £15.00
Quantity

1 Channel Heavy Duty Suzie Trailer Link for reversing camera | CAB011 V2

CAB011-V2-1M

This is the second version of our Heavy Duty Trailer Link, the cost of these cables increased a few years back so we introduced this version for people looking for a cheaper option.  As the V1 and V2 don't fit together we have two separate listings, we have kept the more expensive version 1's in stock to allow existing customers to add on to their existing fleet.  If you haven't used any of our links before and price is a factor then this V2 version will probably be the best option.  I will add that the more expensive V1 in the other listing does "feel" more robust, having said that the V2 has had no problems with durability in the years we've ran with them.  

£68.00

VAT Included £11.33
Quantity

1 Channel Simple Trailer connector for reversing cameras | CAB080M/F

CAB080MF

We often get asked by our customers for a more simple trailer connector without double sockets and flexible suzi coils, this is it.  The side with the waterproof flap sits on the towing vehicle side, the side with the plug will remain on the trailer side (this will need protecting from rain when not connected).  Each side has 100cm tails, simply add your cable length of choice from the 4 pin cable category.

£36.00

VAT Included £6.00
Quantity

1 Channel Suzie Trailer Link for reversing camera | CAB011S-1M

CAB011S-1M-Full Set
  • This plug and socket set is suitable for use with our reversing camera systems that use the 4 pin aviation connectors. 
  • It is our standard model often used for agricultural purposes, as well as being suitable for use on trailers and caravans. 
  • The coil is 0.8m long and stretches to 1.6m easily (measurements approximate). 
  • When connected it forms a locked waterproof join. Each socket has a spring loaded cover to keep moisture out when not in use. 
  • The set carries the signal from one reversing camera. 
  • If you have an articulated HGV we recommend one of our heavy duty trailer links - which allows a longer extension with the flexible coil.

To get the desired length of cable, simply add any of our 4 pin extension cables.

£60.00

VAT Included £10.00

1.5M DC Power Extension 2.1mm/5.5mm (most commonly used for reversing camera power sockets) | CAB008

CAB008

If you see a DC power socket on a reversing camera or a monitor, probably around 99% of the time this will be a 2.1mm/5.5mm DC socket. In some circumstances you may wish to extend this cable, for example when you wish to run an RCA/Phono based camera whilst driving by taking an ignition based power supply from the front of the vehicle back to the reversing camera. This is one of our shorter length cables at 150cm, so it is probably more commonly used to extend the reversing light power supply cable from a high up position down to the rear light cluster.

£2.50

VAT Included £0.42
Quantity

10" Split Screen Monitor (Quad) for reversing cameras - 4x 4 pin inputs (popular for agricultural use and large vehicles) | MON1010Q

MON1010Q

Upto 4 Inputs! 10" Screen! Split screen functions and High Res Screen whilst monitor powers up all the cameras! Works with 12-24V systems.

£210.00

VAT Included £35.00
Quantity

100CM 2.1mm/5.5mm DC Power Socket to red/black bare wires | CAB2155

CAB2155

This is a 3 amp fused 2.1mm/5.5mm DC socket with 100cm red (+12/24V) and black (earth) wire attached. This is used in instances where you have bare red/black wires that you wish to connect one of our extensive range of adaptors with DC plugs to.

£3.30

VAT Included £0.55
Quantity

1080P High Definition Compatible Digital Wireless Link/Bridge Indoor/Outdoor - 100M Extended Range | WT479+WR480

WT479+WR480

These digital wireless sender and receiver boxes are the next generation from the same supplier that used to make our popular ACC434 series. This new version has the same casing, but with an upgrade to work with new AHD reverse cameras all the way up to 1080P.

£265.00

VAT Included £44.17
Quantity

10M (with 8mm link) - 4 Pin Aviation Screw Connector Extension Cable for 1 reversing camera | CAB050-8mm

CAB050-8mm
  • Our 10M length 4 pin top quality extension cable for reversing cameras. 
  • This version comes with a small 8mm diameter disconnect link point 100cm back from the connector at the front of the cable. This was placed there so that the larger 15mm diameter connector could be unplugged (to get through tight gaps) and then reconnected once you arrive close to your monitors channel inputs.
  • Fully waterproof connection, comes with screw locking collar that compresses the connection against the rubber O ring inside.
  • Our extension cables are made from pure copper (not the cheaper CCA/CCS which is prone to failure).
  • The cable has screening around the video signal wire, as well as aluminium foil around covering all of the wires inside the cable - to protect against outside interference, as well as allowing you to coil up any excess cable.
  • This cable is suitable for the latest range of 1080P AHD reversing cameras.
  • This cable is sometimes known as a 4 pin aviation connector cable.

£13.00

VAT Included £2.17
Quantity

10M (with 8mm link) - Twin 4 Pin Aviation Screw Connector Extension Cable for 2 reversing cameras | CAB10Y-8mm

CAB10Y-8mm-SD
  • Our 10M length two channel/signal 4 pin top quality extension cable for reversing cameras. 
  • This version comes with a small 8mm diameter disconnect link point 100cm back from the connector at the front of the cable. This was placed there so that the larger 15mm diameter connector could be unplugged (to get through tight gaps) and then reconnected once you arrive close to your monitors channel inputs.
  • We call these Y cables, since the shape of the ends look like the letter Y, as they are a single cable to make running cables easier, but then split to two male connectors for the reversing/rear view cameras, and two female connectors to feed a monitor.
  • Fully waterproof connection, comes with screw locking collar that compresses the connection against the rubber O ring inside. Please note that the 8mm disconnect link isn't waterproof, so will need to be inside (as this is placed at the front of the cable, this part is usually next to the monitor and isn't an issue).
  • Our extension cables are made from pure copper (not the cheaper CCA/CCS which is prone to failure).
  • The cable has screening around the video signal wire, as well as aluminium foil around covering all of the wires inside the cable - to protect against outside interference, as well as allowing you to coil up any excess cable.
  • This cable is not suitable for the latest range of 1080P AHD reversing cameras (although we have developed a version of this cable that is currently being produced that will be). Our single channel cables will support the high frequency AHD cameras until we get the new design twin cables delivered.
  • This cable is sometimes known as a 4 pin aviation connector cable.

£17.00

VAT Included £2.83
Quantity

10M - 4 Pin Aviation Screw Connector Extension Cable for 1 reversing camera | CAB050

CAB050
  • Our 10M length 4 pin top quality extension cable for reversing cameras. 
  • Fully waterproof connection, comes with screw locking collar that compresses the connection against the rubber O ring inside.
  • Our extension cables are made from pure copper (not the cheaper CCA/CCS which is prone to failure).
  • The cable has screening around the video signal wire, as well as aluminium foil around covering all of the wires inside the cable - to protect against outside interference, as well as allowing you to coil up any excess cable.
  • This cable is suitable for the latest range of 1080P AHD reversing cameras.
  • This cable is sometimes known as a 4 pin aviation connector cable.

£12.00

VAT Included £2.00
Quantity

10M - Twin 4 Pin Aviation Screw Connector Extension Cable for 2 reversing cameras | CAB10Y

CAB10Y-SD
  • Our 10M length two channel/signal 4 pin top quality extension cable for reversing cameras. 
  • We call these Y cables, since the shape of the ends look like the letter Y, as they are a single cable to make running cables easier, but then split to two male connectors for the reversing/rear view cameras, and two female connectors to feed a monitor.
  • Fully waterproof connection, comes with screw locking collar that compresses the connection against the rubber O ring inside.
  • Our extension cables are made from pure copper (not the cheaper CCA/CCS which is prone to failure).
  • The cable has screening around the video signal wire, as well as aluminium foil around covering all of the wires inside the cable - to protect against outside interference, as well as allowing you to coil up any excess cable.
  • This cable is not suitable for the latest range of 1080P AHD reversing cameras (although we have developed a version of this cable that is currently being produced that will be). Our single channel cables will support the high frequency AHD cameras until we get the new design twin cables delivered.
  • This cable is sometimes known as a 4 pin aviation connector cable.

£16.00

VAT Included £2.67
Quantity

10M DC Power Extension 2.1mm/5.5mm (most commonly used for reversing camera power sockets) | CAB010

CAB010

If you see a DC power socket on a reversing camera or a monitor, probably around 99% of the time this will be a 2.1mm/5.5mm DC socket. In some circumstances you may wish to extend this cable, for example when you wish to run an RCA/Phono based camera whilst driving by taking an ignition based power supply from the front of the vehicle back to the reversing camera. This is our shorter length cables at 1000cm (10M) version.

£7.20

VAT Included £1.20
Quantity

10M RCA Phono Extension Cable for Reversing Camera | CAB007

CAB007

This is our 10M Extension Video RCA Phono video lead for reverse parking cameras.  It is a heavy duty thick diameter cable. 

£7.20

VAT Included £1.20
Quantity OUT OF STOCK

10M RCA Phono Extension Cable for Reversing Camera | CAB110R

CAB110R

This is our 10M (1000cm) version of the RCA Phono extension cable with built in "trigger wire".  You will notice that there is a small red wire coming out of the end of both ends of this cable.  This is an additional wire that we have had installed, designed so that you can send a reverse light trigger supply to your monitor - telling it when you are in reverse gear.  We have also seen people use this spare wire to send power from an ignition source at the front of the vehicle to the red power wire for the reversing camera.

£7.20

VAT Included £1.20
Quantity

10x 150mm x 12mm Reusable Hook and Loop Cable Ties | ACC1333

ACC1333

These are easy to use, reusable, and gentle on the cables being tied up. We like these cable ties. 

£1.50

VAT Included £0.25
Quantity

10x 250mm x 4.6mm Black Cable Ties | ACC1332

ACC1332

We don't usually recommend cable ties for securing cables, but if you are using conduit, or you add some protection between the cable tie and the cable then these are ideal. They measure 250mm length by 4.6mm width.

£0.80

VAT Included £0.13
Quantity

10x Black Cable Tie Adhesive Base + 250mm Cable Tie | ACC1523+ACC1332

ACC1523+ACC1332

We don't usually recommend cable ties for securing cables, but if you are using conduit, or you add some protection between the cable tie and the cable then these are ideal. 

This is a bundle that contains 10 each of the black 19mm x 19mm adhesive cable tie base and 250mm length cable ties.  They fit well together.

£1.60

VAT Included £0.27
Quantity

10x Black Cable Tie Adhesive Base | ACC1523

ACC1523

We don't usually recommend cable ties for securing cables, but if you are using conduit, or you add some protection between the cable tie and the cable then these are ideal. This is the black version, we also stock white. We sell these in multiples of 10 pieces. 

£0.90

VAT Included £0.15
Quantity

10x White Cable Tie Adhesive Base + 250mm Cable Tie | ACC1524+ACC1332

ACC1524+ACC1332

We don't usually recommend cable ties for securing cables, but if you are using conduit, or you add some protection between the cable tie and the cable then these are ideal. 

This is a bundle that contains 10 each of the white 19mm x 19mm adhesive cable tie base and 250mm length cable ties.  They fit well together.

£1.80

VAT Included £0.30
Quantity

10x White Cable Tie Adhesive Base | ACC1524

ACC1524

We don't usually recommend cable ties for securing cables, but if you are using conduit, or you add some protection between the cable tie and the cable then these are ideal. This is the white version, we also stock black. We sell these in multiples of 10 pieces. If you are looking for cable ties to fit, please see item code ACC1332.

£1.10

VAT Included £0.18
Quantity

12.5M (with 8mm link) - 4 Pin Aviation Screw Connector Extension Cable for 1 reversing camera | CAB0512-8mm

CAB0512-8mm
  • Our 12.5M length 4 pin top quality extension cable for reversing cameras. 
  • This version comes with a small 8mm diameter disconnect link point 100cm back from the connector at the front of the cable. This was placed there so that the larger 15mm diameter connector could be unplugged (to get through tight gaps) and then reconnected once you arrive close to your monitors channel inputs. 
  • Fully waterproof connection to camera, comes with screw locking collar that compresses the connection against the rubber O ring inside. Please note that the 8mm disconnect link isn't waterproof, so will need to be inside (as this is placed at the front of the cable, this part is usually next to the monitor and isn't an issue).
  • Our extension cables are made from pure copper (not the cheaper CCA/CCS which is prone to failure).
  • The cable has screening around the video signal wire, as well as aluminium foil around covering all of the wires inside the cable - to protect against outside interference, as well as allowing you to coil up any excess cable.
  • This cable is suitable for the latest range of 1080P AHD reversing cameras.
  • This cable is sometimes known as a 4 pin aviation connector cable.

£15.50

VAT Included £2.58
Quantity

12.5M (with 8mm link) - Twin 4 Pin Aviation Screw Connector Extension Cable for 2 reversing cameras | CAB12Y-8mm

CAB12Y-8mm-SD
  • Our 12.5M length two channel/signal 4 pin top quality extension cable for reversing cameras. 
  • This version comes with a small 8mm diameter disconnect link point 100cm back from the connector at the front of the cable. This was placed there so that the larger 15mm diameter connector could be unplugged (to get through tight gaps) and then reconnected once you arrive close to your monitors channel inputs.
  • We call these Y cables, since the shape of the ends look like the letter Y, as they are a single cable to make running cables easier, but then split to two male connectors for the reversing/rear view cameras, and two female connectors to feed a monitor.
  • Fully waterproof connection, comes with screw locking collar that compresses the connection against the rubber O ring inside. Please note that the 8mm disconnect link isn't waterproof, so will need to be inside (as this is placed at the front of the cable, this part is usually next to the monitor and isn't an issue).
  • Our extension cables are made from pure copper (not the cheaper CCA/CCS which is prone to failure).
  • The cable has screening around the video signal wire, as well as aluminium foil around covering all of the wires inside the cable - to protect against outside interference, as well as allowing you to coil up any excess cable.
  • This cable is not suitable for the latest range of 1080P AHD reversing cameras (although we have developed a version of this cable that is currently being produced that will be). Our single channel cables will support the high frequency AHD cameras until we get the new design twin cables delivered.
  • This cable is sometimes known as a 4 pin aviation connector cable.

£19.50

VAT Included £3.25
Quantity

12.5M - 4 Pin Aviation Screw Connector Extension Cable for 1 reversing camera | CAB0512

CAB0512
  • Our 12.5M length 4 pin top quality extension cable for reversing cameras. 
  • Fully waterproof connection, comes with screw locking collar that compresses the connection against the rubber O ring inside.
  • Our extension cables are made from pure copper (not the cheaper CCA/CCS which is prone to failure).
  • The cable has screening around the video signal wire, as well as aluminium foil around covering all of the wires inside the cable - to protect against outside interference, as well as allowing you to coil up any excess cable.
  • This cable is suitable for the latest range of 1080P AHD reversing cameras.
  • This cable is sometimes known as a 4 pin aviation connector cable.

£14.50

VAT Included £2.42
Quantity
Page of 8