Monitors for reversing camera

7" Mirror monitor display for reversing camera - 2x 4 pin inputs | MON293GL

MON293GL

This monitor is the upgrade to our popular MON1. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This has two inputs.

£114.00

VAT Included £19.00
Quantity

7" Mirror monitor display to fit swan neck brackets 2x 4 pin inputs | MON293B

MON293B

This is a version of our popular mirror monitor which has 4 screw holes in the back to fit a range of swan neck brackets that we stock to attach to an existing windscreen stub/button.

£114.00

VAT Included £19.00
Quantity

5" Monitor display for reversing cameras - 3x 4 pin inputs | MON5001

MON5001

This monitor is the best version of the 5" stand On Dash monitor. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This monitor has three inputs.  This monitor has an optional reverse trigger wire which would turn the monitor on and off depending on if it's in reverse. Comes with two brackets, one for a curvy dashboard and the original u shaped bracket for flat dashboards.

£110.00

VAT Included £18.33
Quantity

7" Monitor display for parking camera - 2x 4 pin inputs | MON509D

MON509D

This monitor is one of our newest.  This has a sunshade to prevent glare in sun and glare on the windscreen when using at night. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This has two inputs.  This monitor has a green trigger wire (which is optional if you wish to use or not).  When attached to the reverse light feed, it will switch the monitor on and select channel 2.  If already on it will change channel to number 2.

£112.00

VAT Included £18.67
Quantity

7" Monitor display for reversing camera - 2x 4 pin inputs | MON790/MON16

MON16

This has a sunshade to prevent glare in sun and glare on the windscreen when using at night. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This has two inputs.  This monitor has a green trigger wire (which is optional if you wish to use or not).  When attached to the reverse light feed, it will switch the monitor on and select channel 2.  If already on it will change channel to number 2.

£123.00

VAT Included £20.50
Quantity

7" Monitor display for reversing cameras - 3x 4 pin inputs | MON705

MON705

This monitor is one of our newest.  This has a sunshade to prevent glare in sun and glare on the windscreen when using at night. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This has three inputs.  This monitor has trigger wires (which is optional if you wish to use or not).  When attached to the reverse light feed/indicator power, it will switch the monitor on and select the channel. 

£134.00

VAT Included £22.33
Quantity

7" monitor display for rear camera - 2x 4 pin inputs | MON17

MON17

This monitor is one of our newest.  This has a sunshade to prevent glare in sun and glare on the windscreen when using at night. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V. This has two inputs.  This monitor has a green trigger wire (which is optional if you wish to use or not).  When attached to the reverse light feed, it will switch the monitor on and select channel 2.  If already on it will change channel to number 2.

£130.00

VAT Included £21.67
Quantity

9" Monitor display for reversing cameras - 2x 4 pin inputs | MON9010

MON9010

This monitor is one of our newest.  This has a sunshade to prevent glare in sun and glare on the windscreen when using at night. This model has a Hi-Res Screen, voltage stabiliser and works both 12V and 24V.  It is compatible with our 4 Pin Connector Cameras and 4 Pin Connector Cables.  This has three inputs.  This monitor has trigger wires (which is optional if you wish to use or not).  When attached to the reverse light feed/indicator power, it will switch the monitor on and select the channel. 

£123.00

VAT Included £20.50
Quantity

7" split screen monitor (Quad) display for reversing camera / side cameras | MON7005

MON7005

This is a very flexible monitor, enabling upto 4 cameras to be displayed on the screen at one time. If you only have 2 cameras attached it can view both of these at the same time. Power to the cameras come from the monitor, meaning you don't need to wire in any additional power leads. Most people that order these have 2 side cameras and 2 rear view cameras giving massive coverage. This monitor works with our 4 pin cameras and 4 pin cables.

£160.00

VAT Included £26.67
Quantity

10" Split Screen Monitor (Quad) for reversing cameras - 4x 4 pin inputs (popular for agricultural use and large vehicles) | MON1010Q

MON1010Q

Upto 4 Inputs! 10" Screen! Split screen functions and High Res Screen whilst monitor powers up all the cameras! Works with 12-24V systems.

£210.00

VAT Included £35.00
Quantity

DVS Direct Vision Standard Blind Spot Detection 10" Split Screen Monitor (Quad) for reversing cameras + side cameras - 4x 4 pin inputs | MON1010Q-AHD-BSD

MON1010Q-AHD-BSD

Ideal for pedestrian and cyclist safety, this large 10 inch IPS panel display with touchscreen allows you to mark out boxes to provide alerts when a pedestrian or cyclist enters that area of concern. The monitor features basic recording at 360P when inserting up to a 256GB SD card. The touchscreen works well, and makes adjusting the settings and zones easier compared to using a remote control (which is also provided). Optimal set up is using 2x side cameras, 1 rear reversing camera, and 1 front facing camera.

£258.00

VAT Included £43.00
Quantity

7" waterproof/heavy dustproof monitor display for reversing cameras (ideal for agricultural use) IP66 | MON705W

MON705W

We brought these in mainly for agricultural customers who either have very dusty environments or where the monitors will be exposed to the elements and covered in rain. See the photo's inside to see how we placed the monitor inside a fish tank to demonstrate its abilities.

£168.00

VAT Included £28.00
Quantity

7" Mirror monitor display for reversing cameras - 2x RCA/Phono inputs | MON291

MON291

This monitor has a 7 inch screen and this clips over an existing interior mirror. It acts as a normal mirror when there is no video input and when you select reverse gear (or option of having it on constantly), it will light up with a great picture. Has 2 AV inputs.

£114.00

VAT Included £19.00
Quantity

5" budget monitor display for reverse camera | MON570

MON570

This monitor is great for Car owners or those on a budget who can't fit a 7" screen on their dash or who don't want to replace their rear view mirror. The simplicity is great. There are no control boxes or filter boxes.  This monitor comes with two mounts that can be interchanged - one for dash mounting with a self adhesive pad and one for suction mount.

£72.00

VAT Included £12.00
Quantity

7" Mirror monitor display for AHD reversing camera - 2x inputs (720P/960P/1080P/CVBS) | MON293AHD

MON293AHD

This AHD monitor has two hybrid channel inputs capable of displaying both standard definition cameras, as well as the latest 720P/960P/1080P output AHD reversing cameras. 

£134.00

VAT Included £22.33
Quantity

7" Monitor display for AHD rear view camera - 3x inputs (720P/960P/1080P/CVBS) | MON705AHD

MON705AHD

This AHD monitor has three hybrid channel inputs capable of displaying both standard definition cameras, as well as the latest 720P/960P/1080P output AHD reversing cameras

£154.00

VAT Included £25.67
Quantity

7" Monitor display for AHD reverse camera - 2x inputs (720P/960P/1080P/CVBS) | MON16AHD

MON16AHD

This AHD monitor has two hybrid channel inputs capable of displaying both standard definition cameras, as well as the latest 720P/960P/1080P output AHD reversing cameras

£140.00

VAT Included £23.33
Quantity

7" Windscreen Bracket Rear View Mirror monitor display for AHD reversing camera - 2x inputs (720P/960P/1080P/CVBS) | MON293BAHD

MON293BAHD

This AHD monitor has two hybrid channel inputs capable of displaying both standard definition cameras, as well as the latest 720P/960P/1080P output AHD reversing cameras. 

£134.00

VAT Included £22.33
Quantity

7" split screen monitor (Quad) display for AHD reversing camera / side cameras | MON7005AHD

MON7005AHD

This is a very flexible monitor, enabling upto 4 cameras to be displayed on the screen at one time. If you only have 2 cameras attached it can view both of these at the same time. Power to the cameras come from the monitor, meaning you don't need to wire in any additional power leads. Most people that order these have 2 side cameras and 2 rear view cameras giving massive coverage. This monitor works with our 4 pin cameras and 4 pin cables.

£215.00

VAT Included £35.83
Quantity OUT OF STOCK