Products Map

There may be occasions where you need to connect two female RCA Phono connectors together.  This gender changer allows you to do so.

We kept getting asked by customers if they could use a battery to temporarily mount a wireless camera to a trailer etc. We chose our most popular wireless kit and had the factory modify the wiring, attach magnets to the bottom bracket, and produce an IP66 waterproof 12500mAh magnetic battery. The manufacturer says to expect between 12-14.2 hours operating time, we found at 20C it worked for 14.5 hours. Time can vary depending on temperature and how it's been cared for eg. not storing at low battery state etc.

We occasionally get asked by customers for a cable to change the gender of a 4 pin aviation cable, this cable has male connectors both ends, meaning it can change a female connection in to a male connection.

This system uses the dash monitor which has the most modern version of 5 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 700TVL 960H image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 5 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

• Brake light reversing camera to fit VW Crafter built between 2006 to 2017, and Mercedes Sprinter vans built from 2006 to present.
• Top quality 7 inch rear view mirror monitor display, with options to either clip over existing mirror, or attach directly to the windscreen fitment.
• Swan neck brackets are selectable depending on the metal windscreen fitment/button that is present on your van. 
• If you have nothing present, we can supply a swan neck bracket that allows you to add a fitting/button (with loctite 319 glue).
• 2 Year Guarantee with the specialists - Reversing Cameras UK Ltd.

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 5 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels.  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

• Twin Lens brake light reversing and rear view driving camera to fit VW Crafter built between 2006 to 2017, and Mercedes Sprinter vans built from 2006 to present.
• Top quality 7 inch rear view mirror monitor display, with options to either clip over existing mirror, or attach directly to the windscreen fitment.
• Swan neck brackets are selectable depending on the metal windscreen fitment/button that is present on your van. 
• If you have nothing present, we can supply a swan neck bracket that allows you to add a fitting/button (with loctite 319 glue).
• 2 Year Guarantee with the specialists - Reversing Cameras UK Ltd.

This camera has been designed to replace your LED brake light to add a camera.

This camera has been designed to replace your LED brake light to add a camera.

We have encountered a different style of windscreen mount on some Mercedes Sprinter vans. We believe it is models that are fitted with either auto lights, or auto windscreen wipers.  This bracket will allow our bracket type mirror monitor to mount to this metal button.   Please see photo.

This system uses the Dash monitor which has the most modern version of 5 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well.   We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

• Reversing brake light camera to fit Mercedes Vito vans built between 2016 and present.
• Top quality 7 inch rear view mirror monitor display, with options to either clip over existing mirror, or attach directly to the windscreen fitment.
• Swan neck brackets are selectable depending on the metal windscreen fitment/button that is present on your van. 
• If you have nothing present, we can supply a swan neck bracket that allows you to add a fitting/button (with loctite 319 glue).
• 2 Year Guarantee with the specialists - Reversing Cameras UK Ltd.

This system uses the Dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well.   We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

Brake light reversing cameras have quickly become the most popular option when retrofitting a camera on to a panel van as it's easy to install and looks original. This model is designed to suit Mercedes Vito vans from 2016 onwards. The camera uses the 4 pin aviation connector, however if you intend to use phono/RCA cabling we sell an adaptor set that is selectable in the drop down options of this listing.

Brake light reversing cameras have quickly become the most popular option when retrofitting a camera on to a panel van as it's easy to install and looks original. This model is designed to suit Mercedes Vito vans from 2016 onwards. The camera uses the 4 pin aviation connector, however if you intend to use phono/RCA cabling we sell an adaptor set that is selectable in the drop down options of this listing.

Brake light reversing cameras have quickly become the most popular option when retrofitting a camera on to a panel van as it's easy to install and looks original. This model is designed to suit Mercedes Vito vans from 2016 onwards. The camera uses the 4 pin aviation connector, however if you intend to use phono/RCA cabling we sell an adaptor set that is selectable in the drop down options of this listing.

This mounting is typically seen on Mercedes Sprinter / Vito vans, as well as some Iveco vans, and the pre-2017 VW crafter.

We had these made up so that they would plug in to the 2.1mm DC sockets that are on most of our monitor wiring harnesses.  Fuse taps are a convenient way to tap into a power supply for your new camera system.

We often get asked for the smallest camera we can find, with a good quality picture still. We have sourced these 1/4" CCD flush fit bumper cameras for people that want a subtle bumper/door mount camera but wants it as small as possible. This is as small or smaller than most parking sensors. It comes with an 18.5mm hole saw to cut out the ideal size hole for the camera.