Brake Light Reversing Camera Kits

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which works well.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

This system uses the Clip-over mirror monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

This is a reversing camera kit for Iveco Daily vans built between 2014 and 2022 with a 7" dash monitor display. The reverse camera is designed to fit the high-level brake light for a tidy factory fit appearance. It has an ultra-wide angle for maximum safety while parking. High-quality image sensor, display, and cabling. Comes with a two-year guarantee from the trusted REVCAMUK team.

Our top-selling single brake light reversing camera to fit the 2006 to present Peugeot Boxer, Fiat Ducato, and Citroen Relay vans, as well as the 2022+ Vauxhall Movano vans based on the same platform. This camera is designed to fit where the original high-level brake light did. In fact, the brake light uses the OEM light strip and original fixing screws. A two-year guarantee from the trusted reversing camera specialists - REVCAMUK, the quality image from the high spec PC4089 image sensor and all glass external wide angle lens, plus fast dispatch, why look elsewhere?

If you are looking for a reversing camera for the 2006 to present Fiat Ducato, Citroen Relay, or Peugeot Boxer van, then this is a good choice for you. Screw from the front using original screws, or bolt from the rear using the supplied nuts/bolts. Great image quality, durable build quality, increased safety, and a two year guarantee.

Retrofit brake light reversing camera + rear view camera to fit the Citroen Relay, Peugeot Boxer, and Fiat Ducato vans built between 2006 and present. As of 2022, this camera now also fits Vauxhall Movano vans built from that year to the present. Achieve reversing safety, as well as improving your rear vision with the permanently on driving camera. The second camera is designed to help you to monitor traffic behind you. This means your brake light camera is useful 100% of the time instead of just the approximately 0.1-2% of your journey that you are backing up. Both cameras are high resolution with a quality PC4089 image sensor fitted. Two-year guarantee with the UK's forum favourite reversing camera specialists.

Dual/Twin Lens Reversing Camera + Rear View Driving Camera for Ford Transit vans built from 2014 to present. Designed to replace your factory-fitted OEM brake light. This twin rear view camera gives you a permanent image for rear view, as well as a close-up parking camera. Designed to be an exact fit for the original high-level brake light location. Simply unplug and unclip the original brake light, then reconnect the brake light lead and push the new brake light camera in so that the clips lock it in place. High-quality image, durable build quality, two-year guarantee, a fast dispatch from the UK forum favourite. Buy today for quick delivery.

Reversing Camera for Ford Transit vans built from 2014 to present. Designed to replace your factory-fitted OEM brake light. This parking camera allows you to see a close-up of the back of your vehicle when reversing. Designed to be an exact fit for the original high-level brake light location. Simply unplug and unclip the original brake light, then reconnect the brake light lead and push the new brake light camera in so that the clips lock it in place. High-quality image, durable build quality, two-year guarantee, a fast dispatch from the UK forum favourite. Buy today for quick delivery.

Brake light reversing camera to fit the 2013-present Ford Transit Connect van. Designed to increase safety whilst parking. The brake light camera will fit where the original brake light did. It is fitted with a high-resolution 960h/700tvl PC4089 image sensor, an all-glass quality external lens, and excellent build quality supported with a two-year guarantee.

Brake light reversing camera to fit the mark 7 Ford Transit vans built between 2006 and 2013. Extra wide angle 170 degree field of view. 2 Year Guarantee with us - REVCAMUK - the trusted UK reversing camera specialist. PC4089 960h 700tvl image sensor and quality lens combo. 2 year guarantee on this durable camera. Fits in the original location of the high level brake light. Add an additional layer of reversing safety today. Quick delivery and excellent service as standard.

Reversing camera to fit the Iveco Daily vans built between 2014 and 2022. Fits to the location of the brake light. It comes with a two-year guarantee, a high-quality image sensor, a 960H 700tvl high-resolution image, a very wide-angle field of view, and increases safety and awareness. 

This camera has been designed to replace your LED brake light to add a camera.

Our brake light reversing camera designed to fit both the Mercedes Sprinter and VW Crafter vans. Designed so that you take the OEM LED light strip out of your old high level brake light to transplant in the new brake light camera housing. Full instructions provided.

This brake light camera replaces your existing brake light housing with one that incorporates a reversing camera.

This brake light camera replaces your existing brake light housing with one that incorporates a reversing camera.

Our premium-quality Mercedes Citan and Renault Kangoo reversing camera is designed to replace the factory third high-level brake light on your van. It features a wide-angle field of view, a factory-fitted appearance, a two-year guarantee, a premium high-resolution 960h 700tvl PC4089 image sensor, and our usual fast dispatch and support.

This camera has been designed to take your old bulb out of the Vauxhall Movano, Renault Master and place in to the moulding off the new brake light housing and have the camera built in to give you a good birds eye image.

This camera has been designed to take your old power lead from the existing brake light and place it in the new brake light camera.  The new camera has LED strips to illuminate the brake light and a camera built in with night vision.

This camera has been designed to take your old LED strip out of the Vauxhall Vivaro or Renault Trafic and place in to the moulding off the new brake light housing and have the camera built in to give you a good birds eye image.

This camera has been designed to replace your brake light to add a camera.

Brake light reversing camera designed to fit the Volkswagen Transporter T5 and T6 2 Door vans built between 2003 and present. Retains the tidy factory look of your van, whilst adding a new layer of safety when reversing. Good quality image sensor - PC4089 700tvl. 2 Year Guarantee and quick dispatch.

This camera has been designed to replace your brake light to add a camera.

Retrofit brake light reverse camera to fit VW Caddy vans built between 2003 and 2019. Good quality image sensor, two year guarantee, wide angle lens, and various cable options.

Reversing camera to fit 2017 onwards Volkswagen Crafter vans. Designed to attach to the pre-existing high-level third brake light on the van. All fixings, instructions, and hole saws are provided to facilitate the installation of the camera. It is fitted with a premium 700tvl high-resolution image sensor, quality wide-angle lens, and IR LEDs for night vision, and it comes with a two-year guarantee with us.