Products Map

This system uses the dash monitor which has the most modern version of 5 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which work well with the IR LED's to give great night vision.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 12.5 Metres (41ft)  (or select other length in listing).

• Brake light reversing camera to fit Citroen Berlingo 2008-Present, Peugeot Partner 2008-Present, Vauxhall Combo 2018-Present, and Toyota ProAce City 2019-Present. 
• Top quality 7 inch rear view mirror monitor display, with options to either clip over existing mirror, or attach directly to the windscreen fitment.
• 2 Year Guarantee with the specialists - Reversing Cameras UK Ltd.

• This brake light reversing camera supplied in this kit is the most popular type of reverse camera for Berlingo/Partner/Combo/ProAce City vans.
• Simply remove the existing brake light and replace with the one supplied in this kit with a built in camera.
• The 7" display used in this kit is one of the best we have ever seen, it comes from a very reliable and good quality factory - not to be confused with other similar cheap and cheerful monitors sold elsewhere.
• Either use the static guidelines that the brake light reversing camera generates, or turn these off, and use the programmable guideline function of this top of the range monitor (requires connection to reverse light).
• The monitor has a green reverse trigger wire, if you attach this to a reverse light feed, then the monitor/camera will trigger ON/OFF with reverse gear.  
• The monitor provides power to the camera, so just one power feed is required to produce a picture.  This also means that you can turn the camera on at any time you wish, including full time.  Please note that the camera will be angled down (optimised for parking), so would not see all the way down the road.
• Avoid CANBUS issues with this system - as the monitor powers the camera from the power supply at the front.
• There are half a dozen brake light camera manufacturers.  We use the one that in our experience has the best image sensor, lens quality, and reliability.  They may not be the cheapest option, but quality and reliability is important to both us and our regular customers.
• 2 Year Guarantee with us, in the unlikely event anything should go wrong.

Brake light reversing cameras have become the most popular way to install an aftermarket safety/reversing system in to a van.  This camera is fitted with a quality 700TVL image sensor.

We were always asked for a mirror monitor that had a matt finish screen. We ordered 100 of these monitors but sadly they miss a trigger wire to auto switch when reverse is selected. This would bother about half our customers who wish to have the auto switch. As such we are unable to sell it in our range and we have reduced these to a bargain price to clear.

We have found a further few of these monitors to clear.  They ended up being very popular on clearance  We have kept the clearance price the same.  One of the last things to not be affected by rampant recent inflation.  Grab a bargain before they are gone.

• Slightly used, reported that trigger wire wasn't working, in testing it seems to work fine with new cable
• 2 Channels (4 Pin)
• Works on 12V and 24V vehicles
• Digital Panel 800x480 pixels
• Spring loaded clips to clamp to original interior mirror

1. This camera has been tested and is working correctly
2. The camera fault was caught during UK testing
3. This camera has small scratches on the hood (see photo)
4. The camera comes with a box and has 4 pin aviation cable
5. The camera will come with a 1 year guarantee*

*Guarantee of end of line/clearance items can be tricky, if something goes wrong with your purchase if we don't have an equivalent clearance item to offer as a replacement we would offer a refund instead.

1. This is an older style than our present range with the shorter neck 
2. The camera will come with a 1 year guarantee*

*Guarantee of end of line/clearance items can be tricky, if something goes wrong with your purchase if we don't have an equivalent clearance item to offer as a replacement we would offer a refund instead. 

This is a colour reversing camera which fits in the bumper of your car or vehicle. It comes with a hole saw that is the correct width to cut the hole for the camera. It has infra red LED's to allow for good night time sight. Cable length of 1-20M can be selected inside listing.

This is the compact version of our CCD bracket camera.

This is the compact version of our CCD bracket camera.

Big thank you to Ross at RFT Automotive in Aberdeen area for another awesome set of photos. Ross shared a photo of me from a customer who was disappointed with their monitoring camera system. Ross knew our equipment would be a reliable, good quality upgrade to fit for this customer. Check out the before and after pic.