7" Mirror Monitor + Mini Black Bracket Reversing Camera Kit - PM35KB
Description
PM35H : Mini black reversing camera kit with 7" mirror monitor
Choice of kit power options
Easy-Fit Wiring
Please note that on this camera there are parts on the wiring that must be kept away from water. With numberplate cameras this is usually not a problem as the wire enters the vehicle body close to where the camera is mounted. The only issue would be if mounting on a trailer where the wiring will not be entering an enclosed space. 2 Year GuaranteeWe supply with a 2-year Guarantee with us, meaning we will repair or replace any non-user damaged parts that are deemed faulty. Our failure rate is very low even beyond these two years, if you have a problem outside of 2 years we should still have compatible parts and possible repairs for reasonable amounts. Parts Tested in the UKThe parts of this kit will have been tested twice, once by the factory and once by us. We check all the items in the kit including all cables, trigger wires, IR LEDs and menu functions to reduce any chance of having a non-working part. Our fault rate is extremely low, and we just like to ensure that we avoid any imperfection slipping past. This is why professional fitters love us. |
Detailed Images
Monitor Dimensions
Wiring Layout (monitor side)
Photo showing how the monitor clamps to the existing interior mirror
Choice of power options suchas lighter plug and piggyback fuse holder taps
Yes you can, the monitor powers the camera, this means you can choose to watch the camera at any point, you can drive with it "always on".
Rough guide:
- 5M is good for an average size car
- 7.5M is good for large cars and shorter wheelbase vans
- 10M is good for a medium length van (around 6M)
- 12.5M is good for most vehicles up to around 8.5M long (covers most motorhomes except the super long)
- 15M is good for vehicles up to around 10/11M eg rigid lorry, small coach.
- 20M is good for super long vehicles
Our easy wire fuse tap options are new for 2023. We designed a fuse tap that plugs in to a socket that is present on all of our monitor wiring harnesses. The other side has a "piggyback" fuse holder aka fuse tap. You identify a fuse in the fuse box that comes on/off with the ignition (see piggyback fuse holder / fuse tap instructions here - PDF download). The original fuse is placed in to the new fuse tap, plus there is a new fuse already present for the reverse camera kit. On the same wiring there is an earth terminal connector, simply attach this to a chassis bolt (usually near the fuse box, or add your own).
Monitor7” Diagonally Measured Colour LCD screen CameraImage device:- PC4089 CMOS sensor |