Ford Transit Custom (05/2016+) Twin Lens Brake Light Rear View + Reversing Camera kit with 7" Monitor Display - PM69BLHTW
Description
About the Ford Transit Custom (barn door) brake light reversing + rear view camera with 7 inch dash monitor kitWhen somebody wants a reversing camera for a van, the most popular option these days is a brake light reversing camera. This is because of the following reasons:
The camera supplied in this kit is special, as it is also fitted with an always on rear view camera to monitor traffic. This makes the camera system useful 100% of the driving time, instead of just when in reverse. This particular camera kit is supplied with a 7 inch high resolution dash monitor, this is supplied with a rear bracket mount as standard but a variety of other brackets can be selected here. Please check your brake light, this will fit the Transit customs that have the split type brake light with the LED lights (the LED's were typically installed on vans built after May 2016), if you have the normal Ford Transit, or a Ford Transit custom built before May 2016 fitted with bulb lights then we have separate listings for these. Please note that there is a subtle difference in the finish between the original remaining light, and the new light, we have a picture of this on the listing to help your decision. What vehicle does this fit?Ford Transit Custom with LED brake light May 2016+ Choice of kit power options
Additional monitor bracket/mount optionsWe can supply a discounted additional mount/bracket for the monitor when ordered at the same time as the kit. Please see the photo below, and make your selection using the drop down menu above the add to cart button. See our video below for details about the brackets in the photo above. Easy-Fit Wiring
2 Year GuaranteeWe supply with a 2 year Guarantee with us, meaning we will repair or replace any non-user damaged parts that are deemed faulty. Our failure rate is very low even beyond these two years, if you have a problem outside of 2 years we should still have compatible parts and possible repairs for reasonable amounts. Parts Tested in the UKThe parts of this kit will have been tested twice, once by the factory and once by us. We check all the items in the kit including all cables, trigger wires, IR leds and menu functions to reduce any chance of having a non working part. Our fault rate is extremely low, and we just like to ensure that we avoid any imperfection slipping past. This is why professional fitters love us. |
Detailed Images
Thanks to Ross from RFT Automotive for this picture of the twin camera he installed on one of his customers Ford Transit Customs
Thanks to Ross from RFT Automotive for this picture of the twin camera he installed on one of his customers Ford Transit Customs
Thanks to Ross from RFT Automotive. Driving View shown on our mirror monitor. 7" Dash display provided with this kit instead of mirror monitor.
Thanks to Ross from RFT Automotive. Reversing View shown on our mirror monitor. 7" Dash display provided with this kit instead of mirror monitor.
Monitor Dimensions
Advice if you have an aftermarket spoiler
Wiring Layout - Monitor Side
Choice of power connection method to insert in to the monitor power socket (powers complete kit)
Selection of additional brackets that can be ordered to fit the monitor. Discount price when ordered with kit. Standard bracket is still supplied.
Absolutely. Our monitors and reversing cameras are all suitable for leaving on all the time. In fact this reversing camera kit has a dedicated driving rear view built in so that you can angle it to view following traffic. This makes it useful full time.
Definitely. Our monitor wiring harnesses all have a power socket attached. You will always be supplied with a standard hard wire kit, plus there are fuse tap options available. It would be a case of unplugging the lighter plug and using the standard hard wire kit instead. A lot of customers tell us they are ordering the lighter plug just for trying it out before fitting.
Our easy wire fuse tap options are new for 2023. We designed a fuse tap that plugs in to a socket that is present on all of our monitor wiring harnesses. The other side has a "piggyback" fuse holder aka fuse tap. You identify a fuse in the fuse box that comes on/off with the ignition (see piggyback fuse holder / fuse tap instructions here - PDF download). The original fuse is placed in to the new fuse tap, plus there is a new fuse already present for the reverse camera kit. On the same wiring there is an earth terminal connector, simply attach this to a chassis bolt (usually near the fuse box, or add your own).
All of our brake light cameras have fixed guidelines that will display on the picture. These can be removed by snipping a little loop of wire near the 4 pin screw connector. You can choose to have no guidelines, or you can add the monitor guidelines. The monitor guidelines can be customised inside the menu settings (please see the downloadable PDF manual for the dash monitor supplied with this kit).
Instruction manual for the 7 inch monitor display covering installation and the menu system - including using adjustable guidelines from the monitor (requires reverse trigger connection)
Monitor7” Colour LCD screen Driving camera (upper camera) Sensor: 1/3 PC4089 CMOS Effective Pixels: 976(H) x 592(V) TV line: 700 TVL TV system: NTSC Lens: 2.6mm Min illumination: 0.1 LUX Waterproof: IP68 View angle: V 65 degrees, H 80 degrees D 105 degrees Camera lens adjustment: 20 degrees up and down Voltage: 12 volts Current consumption: 150mA Operating temperature: -20 to 70 degrees C Certificates: FCC, CE, E-mark, RoHS Connector: 4 pin aviation Reversing camera (lower camera) Sensor: 1/3 PC4089 CMOS Effective Pixels: 976(H) x 592(V) TV line: 700 TVL TV system: NTSC Lens: 1.9mm Min illumination: 0.0 LUX (IR LED on) IR LEDs: 8 pcs Night vision: 10m Waterproof: IP68 View angle: V 85 degrees, H 130 degrees D 160 degrees Camera lens adjustment: 20 degrees up and down Voltage: 12 volts Current consumption: 150mA Operating temperature: -20 to 70 degrees C Guideline: Optional (some have a trigger wire to select) Certificates: FCC, CE, E-mark, RoHS Connector: 4 pin aviation |