0 £0.00
Ford Transit Custom May 2016-2024 Brake Light Reversing Camera | CAM007FTC LED
Description
Ford Transit Custom Brake Light Reversing Camera – LED Version (CVBS 700 TVL) | CAM007FTC LEDThis CVBS version of the CAM007FTC LED brake light reversing camera is designed specifically for Ford Transit Custom vans from approximately May 2016 to 2024 that use the later LED-type upper brake light. Once fitted, it retains a clean factory appearance while providing a clear and reliable reversing view that works with the vast majority of aftermarket systems. The camera uses our long-proven PC4089 image sensor, paired with a high-quality all-glass composite lens, producing a clear and reliable 700 TVL CVBS image with good colour and contrast. We’ve used this sensor for many years because we know it performs reliably to a high standard and it outperforms many of the lower-down versions commonly found in brake light cameras. The housing is sealed to IP68 standards, making it suitable for vehicles that live and work outside. If your van uses the earlier bulb-type brake light (2012 – May 2016), this version will not fit. Please see our bulb-type version instead: Key featuresFactory-fit LED brake light replacement – Designed specifically for the LED-style upper brake light used on Ford Transit Custom models from May 2016 to 2024. Fits neatly in place of the original light for a tidy OEM-style finish. Clear and reliable CVBS (NTSC) image from upgraded PC4089 sensor – Outputs a standard CVBS NTSC video signal, making it compatible with the vast majority of aftermarket reversing camera monitors, dash displays and head units. The PC4089 sensor delivers a clear and reliable 700 TVL image with natural colours and good contrast, selected for long-term performance. High-quality all-glass composite lens – Uses an all-glass composite lens rather than plastic-glass alternatives. This helps maintain clarity over time and avoids the UV sun-fade and “milky” appearance often seen with cheaper optics. 160° diagonal wide viewing angle – Provides a wide and usable rear view when reversing, offering good coverage to avoid haards. IP68 waterproof construction – IP68 waterproof housing, proven to withstand the worst the British weather can throw at it, whether the van is parked up overnight or used daily. Optional adaptors and extension cables – Optional 4-pin to RCA adaptor available for aftermarket stereos with RCA video inputs, along with 5 m to 15 m aviation extension cables to suit different vehicle lengths. UK tested and supplied with a 2-year Revcamuk guarantee – With almost 20 years in the reversing camera industry, we’ve worked with a wide range of factories. These brake light cameras come from one of the best manufacturers we use and are fully supported with our 2-year Revcamuk guarantee. If a non-user-damage fault develops within two years, we’ll replace the camera to keep you reversing safely. Vehicle fitment Compatible with the following vehicle model:
For earlier bulb-type models (2012 – May 2016), please use the bulb-type version linked above. What’s in the box
Add a monitor and cable with one of our premium brake light reversing camera kitsIf you would like a complete reversing camera kit for your Transit Custom, including a display, the kits below pair this camera with suitable monitors and cabling, all backed by our 2-year guarantee. |
Detailed Images
Brake light reversing camera fitted to Ford Transit Custom vans, photos supplied by Ross from RFT Automotive and Eddie, showing clean factory-fit installation.
Single-lens reversing brake light camera for Ford Transit Custom (May 2016-2024) led-type brake light models, showing the camera unit, pre-cut foam seal, optional 4-pin extension cable, and optional RCA adaptor – REVCAMUK.
Ford Transit Custom small barn door brake light reversing camera with dimensions 262mm wide, 51mm high, and 100mm deep, supplied by REVCAMUK
Our reverse camera will fit the same location/entry point as the original brake light. The original lights plug will be inserted into the new brake light reverse camera to keep the high-level brake light working well.
There could be a number of reasons they may be cheaper than us, the most common are below :
- Rejected Production Runs - This is more common on the marketplaces where there are a lot of non-UK businesses (although the stock is often in the UK). When one of the larger factories produces a camera they will age-test a batch to ensure that the quality is sufficiently high to be able to send to their big customers (like us). If a production run fails this test with a high enough number having issues, the whole batch is often sold off for "recycling" the components. Sadly, these get placed in a container setting sail to the UK and other destinations, and eventually listed on a marketplace at crazy low prices - lower than we can buy hundreds at a time for. Sometimes you are lucky, sometimes you are not, depending on how badly the batch failed.
- Cheaper Components Used - There are different standards of image sensor, support chips, lenses and camera bodies. We opt for better quality; the results speak for themselves. We didn't earn our reputation by buying as cheap as we could; it's not what our customers want. Although at the same time we really do keep our prices as low as possible. The cheaper prices help us to sell more volume, which means we can bring the cameras in by ocean shipping, saving freight costs, which we pass to the consumer.
- Produced by a "Factory for the day" - We have seen some shocking quality cameras sent to us over the years by customers. There is a phenomenon in China where someone can rent factory space for a day or two in order to complete a production run. Often this is a factory employee that is trying to go it alone and start his own business. Sadly, they don't often have the best engineers, they usually buy the lowest price/quality components, have the lowest standard of production line worker, and they can't afford to reject a bad production run. These usually either end up on a Marketplace or sold directly from a Chinese website.
In short, trust us to find the best quality and support you for safety and peace of mind.
See our general guide to installing 4 pin reversing cameras. This includes fitting to stereos inc Kenwood / Sony / Pioneer etc.
| Sensor: 1/3" PC4089 CMOS |
Related Products
Ford Transit Custom 2012–2024 Brake Light Reversing Camera Kit (LED or Bulb) | PM39BLH / PM39BLG
£190.00
VAT Included
£31.67 
Ford Transit Custom 2012–2024 Brake Light Reversing Camera Kit (LED or Bulb) | PM59BLH / PM59BLG
£190.00
VAT Included
£31.67 
Ford Transit Custom 2012–2024 Brake Light Reversing Camera Kit (LED or Bulb) | PM69BLH / PM69BLG
£195.00
VAT Included
£32.50 
Ford Transit Custom 2012–2024 Twin Lens Brake Light Reversing Camera Kit (LED or Bulb) | PM59BLHTW / PM59BLGTW
£250.00
VAT Included
£41.67 
Ford Transit Custom May 2016-2024 Brake Light Reversing Camera | CAM007FTC LED
£90.00
VAT Included
£15.00 
Ford Transit Custom May 2016-2024 Twin Lens Brake Light Reversing Camera | CAM007FTC LED TW
£150.00
VAT Included
£25.00 
