7" split screen monitor (Quad) display for AHD reversing camera / side cameras | MON7005AHD

7 Inch AHD Compatible Quad Split Screen Monitor for 720P/960P/1080P AHD reverse / side / rear view cameras

• The 7 inch AHD Quad/ Split-Screen monitor allows you to view 1, 2, 3, or 4 cameras at once.
• This model is designed to take the latest AHD (analogue high definition) cameras, and arrange them in a split screen, or full screen.
• 4x trigger wire - to auto change channel when a trigger occurs eg selecting reverse gear, indicating left/right etc.
• If you attach a trigger wire to the left indicator power supply, you can set it to stay on for a few seconds after power is last detected - avoiding the channel turning on/off with the indicator flashes.
• Fitted with a 7" Hi-Resolution 1024x600 pixel Digital IPS display (this is higher resolution than other cheaper 480x234 pixel analogue LCD displays, or our non-AHD version 800x480 pixel digital LCD display).
• Comes with a heavy-duty U bracket, which connects to the side mounting points, other reversing camera monitor brackets available.
• Comes with a deep removeable sunhood/sunshade.
• Comes with a full function remote control.
• Can be left on all the time, the monitor provides power to the camera down the 4 pin connector.
• Comes with a 200cm power loom / wiring harness with 4x 4 pin "aviation" connectors (most commonly used in the industry).
• Works best with AHD signal reversing cameras, although will still work with traditional CVBS cameras. If you are only using CVBS cameras, then our standard CVBS split screen monitor will work better with them due to its dedicated CVBS signal chip. 
• The menu allows you to mirror/unmirror each channel individually, and also set trigger delays.