Cables, Adaptors, Tools and Fixings

This is our 10M (1000cm) version of the RCA Phono extension cable with built in "trigger wire".  You will notice that there is a small red wire coming out of the end of both ends of this cable.  This is an additional wire that we have had installed, designed so that you can send a reverse light trigger supply to your monitor - telling it when you are in reverse gear.  We have also seen people use this spare wire to send power from an ignition source at the front of the vehicle to the red power wire for the reversing camera.

This is our 15M Extension Video RCA Phono video lead for reverse parking cameras.  It is a heavy duty thick diameter cable. 

This is our 15M (1500cm) version of the RCA Phono extension cable with built in "trigger wire".  You will notice that there is a small red wire coming out of the end of both ends of this cable.  This is an additional wire that we have had installed, designed so that you can send a reverse light trigger supply to your monitor - telling it when you are in reverse gear.  We have also seen people use this spare wire to send power from an ignition source at the front of the vehicle to the red power wire for the reversing camera.

This is our 20M Extension Video RCA Phono video lead for reverse parking cameras.  It is a heavy duty thick diameter cable. 

This is our 15M (1500cm) version of the RCA Phono extension cable with built in "trigger wire".  You will notice that there is a small red wire coming out of the end of both ends of this cable.  This is an additional wire that we have had installed, designed so that you can send a reverse light trigger supply to your monitor - telling it when you are in reverse gear.  We have also seen people use this spare wire to send power from an ignition source at the front of the vehicle to the red power wire for the reversing camera.

There are times when people find themselves with two male phono / RCA plugs that they need to join together. These female to female couplers help to overcome this and "couple" the two plugs together.

There may be occasions where you need to connect two female RCA Phono connectors together.  This gender changer allows you to do so.

ACC093 - BNC Plug to RCA Phono (Female)

These are easy to use, reusable, and gentle on the cables being tied up. We like these cable ties. 

We don't usually recommend cable ties for securing cables, but if you are using conduit, or you add some protection between the cable tie and the cable then these are ideal. They measure 250mm length by 4.6mm width.

We don't usually recommend cable ties for securing cables, but if you are using conduit, or you add some protection between the cable tie and the cable then these are ideal. 

This is a bundle that contains 10 each of the black 19mm x 19mm adhesive cable tie base and 250mm length cable ties.  They fit well together.

We don't usually recommend cable ties for securing cables, but if you are using conduit, or you add some protection between the cable tie and the cable then these are ideal. This is the black version, we also stock white. We sell these in multiples of 10 pieces. 

We don't usually recommend cable ties for securing cables, but if you are using conduit, or you add some protection between the cable tie and the cable then these are ideal. 

This is a bundle that contains 10 each of the white 19mm x 19mm adhesive cable tie base and 250mm length cable ties.  They fit well together.

We don't usually recommend cable ties for securing cables, but if you are using conduit, or you add some protection between the cable tie and the cable then these are ideal. This is the white version, we also stock black. We sell these in multiples of 10 pieces. If you are looking for cable ties to fit, please see item code ACC1332.

We prefer adhesive lined heat shrink versus non adhesive lined. The added advantages are that the connection is moistureproof and the heatshrink will never move position to expose the wires underneath.

We prefer adhesive lined heat shrink versus non adhesive lined. The added advantages are that the connection is moistureproof and the heatshrink will never move position to expose the wires underneath.

Our favourite method of connecting any wires up when installing a reversing camera system is the trusty old solder. This is a convenient tube of 1.2mm lead free soldering wire with a melt point of 228C.  Total length is 180CM.  

Insulation tape can be used for:

• Covering an internal solder/crimp joint to avoid accidentally exposing the wires inside.
• Wrapping around non screw locking connections eg phono RCA to avoid the connectors accidentally separating.
• Cable tidying by wrapping around cables that you want to keep together (please be aware that if you ever want to take them apart afterwards there may be a sticky adhesive residue - re-usable hook and loop cable ties may be a better option if you plan to remove at some point)

These digital wireless sender and receiver boxes are the next generation from the same supplier that used to make our popular ACC434 series. This new version has the same casing, but with an upgrade to work with new AHD reverse cameras all the way up to 1080P.

5 inch LCD panel monitor, links with our 60M range models of wireless reversing cameras and transmitters. Please note that you can only pair this monitor with one camera/sender box at a time.

This 60m receiver box can be used to pair with either a 60m transmitter box, or a 60m wireless camera.  There are two technologies of digital wireless that we stock, 60m and 100m, they are both good, but they aren't compatible with each other (ie 60m equipment won't work with 100m and vice versa).

This is one of the newest ways of linking up your system to avoid wires running front to back. It is compatible with all our easy fit 4 pin camera systems and can be made compatible with adaptors to all our other phono based systems. It has a transmitter and receiver. The box with the transmitter also powers the reversing camera as well as taking the signal making setting up easier. The receiver box can plug into the monitors 4 pin harness and if ordered with a 1/2/3/5/10/12.5/15/20M 4 pin cable can be moved to different places to make the mounting of the receiver box in a convenient space, same as the sender unit.

This 60m transmitter box can be used to pair with either a 60m receiver box, or a 60m wireless monitor.  There are two technologies of digital wireless that we stock, 60m and 100m, they are both good, but they aren't compatible with each other (ie 60m equipment won't work with 100m and vice versa).

Vehicle Wireless Reverse/Rear View Camera on a bracket. Reliable and secure paired connection, works with any of our 60M digital wireless range. Comes with a built in aerial and transmitter.