Cables, Adaptors, Tools and Fixings

• This plug and socket set is suitable for use with our reversing camera systems that use the 4 pin aviation connectors. 
• It is our standard model often used for agricultural purposes, as well as being suitable for use on trailers and caravans. 
• The coil is 0.8m long and stretches to 1.6m easily (measurements approximate). 
• When connected it forms a locked waterproof join. Each socket has a spring loaded cover to keep moisture out when not in use. 
• The set carries the signal from one reversing camera. 
• If you have an articulated HGV we recommend one of our heavy duty trailer links - which allows a longer extension with the flexible coil.

To get the desired length of cable, simply add any of our 4 pin extension cables.

This is a 2 way heavy duty trailer link, using the 13 pin Euro connector, which is a 90 degree twist lock design.  Simply choose the 4 pin extension cables you require from here: 4 Pin Cables

If you have a requirement to have two cameras on your trailer, and need a flexible heavy duty suzie coil then you have found the right product.  Each side has 30cm tails, simply add your cable length of choice from the 4 pin cable category.

This cable allows you to have 2x reversing cameras on a trailer/caravan, connected up via cable to the towing vehicle.  Simply choose the 4 pin cables you require from here: 4 Pin Cables

This cable allows you to have 3 cameras go across to the trailer/caravan.  Simply choose the 4 pin cables you require from here: 4 Pin Cables

This cable allows you to have 4 cameras go across to the trailer/caravan.  Simply choose the 4 pin cables you require from here: 4 Pin Cables

ACC093 - BNC Plug to RCA Phono (Female)

We have been keeping these trailer link connection plug and socket sets in stock for our customers who want to create their own custom trailer link connections. These are the same plugs and sockets that we use in our standard duty trailer links. If you are building a connection for a single camera, then the 5-pin version would be the best option. However, if you require multiple connections, then the 7-pin version would be necessary.

There are times when people find themselves with two male phono / RCA plugs that they need to join together. These female to female couplers help to overcome this and "couple" the two plugs together.

There may be occasions where you need to connect two female RCA Phono connectors together.  This gender changer allows you to do so.

This is our 10M Extension Video RCA Phono video lead for reverse parking cameras.  It is a heavy duty thick diameter cable. 

This is our 10M (1000cm) version of the RCA Phono extension cable with built in "trigger wire".  You will notice that there is a small red wire coming out of the end of both ends of this cable.  This is an additional wire that we have had installed, designed so that you can send a reverse light trigger supply to your monitor - telling it when you are in reverse gear.  We have also seen people use this spare wire to send power from an ignition source at the front of the vehicle to the red power wire for the reversing camera.

This is our 15M Extension Video RCA Phono video lead for reverse parking cameras.  It is a heavy duty thick diameter cable. 

This is our 15M (1500cm) version of the RCA Phono extension cable with built in "trigger wire".  You will notice that there is a small red wire coming out of the end of both ends of this cable.  This is an additional wire that we have had installed, designed so that you can send a reverse light trigger supply to your monitor - telling it when you are in reverse gear.  We have also seen people use this spare wire to send power from an ignition source at the front of the vehicle to the red power wire for the reversing camera.

This is our 5M Extension Video RCA Phono video lead for reverse parking cameras.  It is a heavy duty thick diameter cable. 

This is our 6M (600cm) version of the RCA Phono extension cable with built in "trigger wire".  You will notice that there is a small red wire coming out of the end of both ends of this cable.  This is an additional wire that we have had installed, designed so that you can send a reverse light trigger supply to your monitor - telling it when you are in reverse gear.  We have also seen people use this spare wire to send power from an ignition source at the front of the vehicle to the red power wire for the reversing camera.

These are easy to use, reusable, and gentle on the cables being tied up. We like these cable ties. 

We don't usually recommend cable ties for securing cables, but if you are using conduit, or you add some protection between the cable tie and the cable then these are ideal. They measure 250mm length by 4.6mm width.

We don't usually recommend cable ties for securing cables, but if you are using conduit, or you add some protection between the cable tie and the cable then these are ideal. 

This is a bundle that contains 10 each of the black 19mm x 19mm adhesive cable tie base and 250mm length cable ties.  They fit well together.

We don't usually recommend cable ties for securing cables, but if you are using conduit, or you add some protection between the cable tie and the cable then these are ideal. This is the black version, we also stock white. We sell these in multiples of 10 pieces. 

We don't usually recommend cable ties for securing cables, but if you are using conduit, or you add some protection between the cable tie and the cable then these are ideal. 

This is a bundle that contains 10 each of the white 19mm x 19mm adhesive cable tie base and 250mm length cable ties.  They fit well together.

We don't usually recommend cable ties for securing cables, but if you are using conduit, or you add some protection between the cable tie and the cable then these are ideal. This is the white version, we also stock black. We sell these in multiples of 10 pieces. If you are looking for cable ties to fit, please see item code ACC1332.

We prefer adhesive lined heat shrink versus non adhesive lined. The added advantages are that the connection is moistureproof and the heatshrink will never move position to expose the wires underneath.

We prefer adhesive lined heat shrink versus non adhesive lined. The added advantages are that the connection is moistureproof and the heatshrink will never move position to expose the wires underneath.