7" Mirror Monitor + Sony CCD Black Roof Mount Overhang Reversing Camera Kit - PM37
Description
PM37 - 7 inch mirror monitor and black overhang roof mount reversing camera kit
Choice of kit power options
Easy-Fit Wiring
Image Sensor for CameraAn image sensor is the part of the camera that detects and captures information to make an image, there are various sizes of sensor usually between 1/4" and 1/3" with the larger sensors able to capture more detail. In the old days, you used to have to pick CCD for quality as CMOS wasn't as good, this has changed recently with some advancements in CMOS technology (there are varying quality levels of CMOS to confuse matters). In this particular kit, we are using the Sony 1/3" CCD 700TVL image sensor inside the camera. We consider this the joint best image sensor in terms of picture quality you can get on a reversing camera. 2 Year GuaranteeWe supply with a 2-year Guarantee with us, meaning we will repair or replace any non-user damaged parts that are deemed faulty. Our failure rate is very low, even beyond these two years. If you have a problem outside of 2 years we should still have compatible parts and possible repairs for reasonable amounts. Parts Tested in the UKThe parts of this kit will have been tested twice, once by the factory and once by us. We check all the items in the kit including all cables, trigger wires, IR LEDs and menu functions to reduce any chance of having a non-working part. Our fault rate is extremely low, and we just like to ensure that we avoid any imperfection slipping past. This is why professional fitters love us. Optional Extension Plate |
Detailed Images
Roof mounted overhang reversing camera fitted to a van
Monitor Dimensions
Roof mounted camera dimensions
Wiring Layout (monitor side)
Wiring Layout (camera side)
Photo showing how the monitor clamps to the existing interior mirror
Choice of power options suchas lighter plug and piggyback fuse holder taps
Video
Video to show how the clip-over mirror monitor attaches to the interior mirror.
Yes you can, the monitor powers the camera, this means you can choose to watch the camera at any point, you can drive with it "always on".
The standard high resolution camera/monitor is a very nice picture, it gives you everything you need for visibility. The only reason to upgrade to AHD is if you want to see even more detail such as the detail of gravel on the floor, or want the colours of cars etc to "pop" on the screen and be even more vivid. In terms of safety, both are on par with each other.
Our easy wire fuse tap options are new for 2023. We designed a fuse tap that plugs in to a socket that is present on all of our monitor wiring harnesses. The other side has a "piggyback" fuse holder aka fuse tap. You identify a fuse in the fuse box that comes on/off with the ignition (see piggyback fuse holder / fuse tap instructions here - PDF download). The original fuse is placed in to the new fuse tap, plus there is a new fuse already present for the reverse camera kit. On the same wiring there is an earth terminal connector, simply attach this to a chassis bolt (usually near the fuse box, or add your own).
Rough guide:
- 5M is good for an average size car
- 7.5M is good for large cars and shorter wheelbase vans
- 10M is good for a medium length van (around 6M)
- 12.5M is good for most vehicles up to around 8.5M long (covers most motorhomes except the super long)
- 15M is good for vehicles up to around 10/11M eg rigid lorry, small coach.
- 20M is good for super long vehicles
Instructions for our MON293GL mirror monitor, supplied with the Sony CCD option.
Monitor7” Diagonally Measured Colour LCD screen CameraImage Device:SONY 1/3" 811 CCD 960H 700TVL |