Van Reverse Camera Kits

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which works well.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

This system uses the dash monitor which has the most modern version of 7 inch LCD Screen inside, which is a Digital Panel High Resolution screen with 800x480 pixels (compared to most sellers analogue screens of 480x234).  Built in voltage stabiliser allows it to work on both 12V and 24V.   The camera has the latest 1/3" Quality CMOS 700TVL image sensors fitted which works well.  The camera can be adjusted up and down.  We use waterproof screw connector cables, which allows monitor to power camera making this an easy-fit system.  We give a 2 Year Guarantee for this system for factory defects.  Cable length is 10 Metres (30ft)  (or select other length in listing).

High quality reversing camera kit to fit the Peugeot Expert / Traveller vans built from 2016, as well as Vauxhall Vivaro C models built after 2019, and Toyota ProAce vans built after 2016. 700tvl high resolution image sensor, great colourful image, two year guarantee. Accepts the original OEM light strip.

• Great Camera Image Quality - We don't settle for the base image sensor when it comes to our cameras. We have had the PC4089 700tvl image sensor installed combined with our all-glass composite lens to ensure a crystal clear, colourful image for many years to come.
• High Resolution Digital Display Monitor - The monitor comes from one of our long term tried-and-tested reliable factories. We have it fitted with a good quality 800x480 digital high resolution LCD panel, which is essential for showing the cameras image of to its best potential.
• Two Year Guarantee - Our brake light factory is one of the best around, with a great reputation for longevity with their cameras. They fully support our two year guarantee on the brake light cameras, which we pass on to you. The cabling and monitor is also covered by the two year guarantee.
• Great OEM Appearance - This brake light camera retains the factory look of the vehicle, whilst adding an additional layer of safety.
• IP69K Waterproof Protection - The maximum ingress protection / waterproof rating you can get. Be assured that this camera will not suffer from being exposed to the Great British weather at its wettest.
• Extra Wide Field Of View - Very wide 170 degrees field of view to give you the maximum visibility to the rear of your van.
• Increased Safety - This camera will help to increase the safety of your vehicle, by giving you greater visibility in a traditionally poor visibility area. Nearly 25% of all vehicle accidents in the UK occur whilst reversing, don't be another statistic and protect yourself and others today with this top spec product.
• No CANBUS Issues - Thanks to the reusing of your OEM light strip (very easy - see instructions tab) and the monitor powering the reverse camera, you won't experience any issues of CANBUS cutting power to the rear light/camera.
• 1st Class Service and Support - We pride ourselves on going above and beyond with service. Expect fast delivery and great support when you purchase with us.

This is a reversing camera kit for Iveco Daily vans built between 2014 and 2022 with a 7" dash monitor display. The reverse camera is designed to fit the high-level brake light for a tidy factory fit appearance. It has an ultra-wide angle for maximum safety while parking. High-quality image sensor, display, and cabling. Comes with a two-year guarantee from the trusted REVCAMUK team.

This is a reversing camera kit for Iveco Daily vans built 2022 onwards with a 7" dash monitor display. The reverse camera is designed to fit the high-level brake light for a tidy factory fit appearance. It has an ultra-wide angle for maximum safety while parking. High-quality image sensor, display, and cabling. Comes with a two-year guarantee from the trusted REVCAMUK team.

• Brake light reversing camera to fit Ford Transit Connect vans built between 2013 and present.
• Top quality 7 inch monitor display, with a selection of monitor brackets.
• 2 Year Guarantee with the specialists - Reversing Cameras UK Ltd.

• The reversing camera kit comes with a heavy duty surface mounted monitor display, fitted with a 7" LCD panel. This monitor comes with a "U shape" dashboard mounting bracket that fits to the side mounting points. It also has a rear channel to fit our other mounting brackets.
• Popular with customers who require two cameras in two different locations, such as horsebox owners. The cameras can be used both inside and outside.
• Comes with two white bracket cameras, fitted with one of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down). Switch between the two with the channel number buttons on the monitor, or by attaching the trigger wire to reverse light feed.
• The cameras are fitted with a stainless steel bracket, which has proven itself to protect against rust.
• 120 degree wide angle lens fitted to cameras.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• Kit is supplied with our roof overhang reverse camera, which is fitted with one of a choice of two great oerformance Sony image sensors - the Sony CCD or the Sony AHD (High Definition Upgrade Option)
• The reversing camera has IR LED night vision.
• If your vehicle has deep doors, you will likely need our extension plate to help the camera get past them.
• This reversing camera kit uses our 3 channel 7 inch monitor, which has a sturdy side mounting U bracket.
• The monitor has a long proven track record for reliability in demanding conditions - a farmers favourite, as well as HGV/Lorry, Motorhome, and van owners.
• The monitor auto dims the brightness settings depending on ambient light via its integrated light sensor.
• The camera uses the 4 pin aviation locking connector, this connector is found across many suppliers now, as it has proven itself to be the most durable connection.
• The kit comes with a 2 year guarantee with us. We will also support you long beyond that, with spares/repairs/advice etc.

• This reversing camera kit comes with a heavy duty surface mounted monitor display, fitted with a 7" LCD panel. This monitor comes with a "U shape" dashboard mounting bracket that fits to the side mounting points. It also has a rear channel to fit our other mounting brackets.
• Comes with a black bracket reversing camera, fitted with one of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down).
• The camera is fitted with a stainless steel bracket, which has proven itself to protect against rust.
• Choice of lens angle : 120 degrees for general use and parking, or 60 degrees if you plan to only use for rear view/driving (looking back down the road).
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• Kit is supplied with our compact bracket reverse camera, which is fitted with the very respected Sony 700TVL CCD image sensor - CCD gives great dynamic range and low light level performance.
• The reversing camera has a stainless steel bracket that has been painted either black or white. Stainless steel has proven itself to be very rust resistant, but it is rare to find on reversing cameras due to the difficulty in painting stainless steel.
• This reversing camera kit uses our 3 channel 7 inch monitor, which has a sturdy side mounting U bracket.
• The monitor has a long proven track record for reliability in demanding conditions - a farmers favourite, as well as HGV/Lorry, Motorhome, and van owners.
• The monitor auto dims the brightness settings depending on ambient light via its integrated light sensor.
• The camera uses the 4 pin aviation locking connector, this connector is found across many suppliers now, as it has proven itself to be the most durable connection.
• The kit comes with a 2 year guarantee with us. We will also support you long beyond that, with spares/repairs/advice etc.

• This reversing camera kit comes with a heavy duty surface mounted monitor display, fitted with a 7" LCD panel. This monitor comes with a "U shape" dashboard mounting bracket that fits to the side mounting points. It also has a rear channel to fit our other mounting brackets.
• Comes with a twin lens bracket camera, which houses both a 120° reversing camera for parking, and a 45°rear view camera for driving.
• Choice of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down).
• The camera is fitted with a stainless steel bracket, which has proven itself to protect against rust.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• This reversing camera kit comes with a heavy duty surface mounted monitor display, fitted with a 7" LCD panel. This monitor comes with a "U shape" dashboard mounting bracket that fits to the side mounting points. It also has a rear channel to fit our other mounting brackets.
• Comes with a white bracket reversing camera, fitted with one of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down).
• The camera is fitted with a stainless steel bracket, which has proven itself to protect against rust.
• Choice of lens angle : 120 degrees for general use and parking, or 60 degrees if you plan to only use for rear view/driving (looking back down the road).
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• This reversing camera kit comes with a heavy duty surface mounted monitor display, fitted with a 7" LCD panel. This monitor comes with a "U shape" dashboard mounting bracket that fits to the side mounting points. It also has a rear channel to fit our other mounting brackets.
• Comes with a twin lens bracket camera, which houses both a 120° reversing camera for parking, and a 45°rear view camera for driving.
• Choice of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down).
• The camera is fitted with a stainless steel bracket, which has proven itself to protect against rust.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• This reversing camera kit comprises of a bolt type number plate reverse camera, designed to fit to the number plate light area of your vehicle. Plus a top quality high resolution dash monitor.
• This dash monitor uses a high quality 7 inch LCD digital panel, that gives great colour and brightness.
• The bolt type number plate reversing camera has had an update for 2023. We have been so impressed with the quality of the PC4089 700TVL image sensor, combined with the all glass composite lenses (the same as we use with our brake light cameras), that we had the same factory make these reversing cameras with the same setup.
• The PC4089 sensor is one of the new generation of CMOS, which costs less to produce than CCD, but still has very good performance. We are then able to pass along the savings to you.
• The camera fixes to the vehicle via a bolt and nut, which the wire travels through in to the vehicle.
• The camera is fitted with a very wide angle lens, to be able to easily see all around the rear of the vehicle.

• This reversing camera kit comes with a rear view mirror monitor display, fitted with a 7" LCD panel. This monitor secures itself to the existing interior mirror with strong, spring-loaded grips.
• Comes with a black bracket reversing camera, fitted with one of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down).
• The camera is fitted with a stainless steel bracket, which has proven itself to protect against rust.
• Choice of lens angle : 120 degrees for general use and parking, or 60 degrees if you plan to only use for rear view/driving (looking back down the road).
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• 7" slimline dash monitor with clear digital LCD display.
• Black stainless-steel bracket camera with Sony CCD 700TVL sensor, optional Sony AHD 1080P upgrade.
• Choice of lens: 120° wide for reversing or 60° narrow for rear-view driving.
• IP68 waterproof housing with an anti-rust stainless bracket.
• Easy-fit aviation cabling avoids CANBUS issues, optional lighter plug or fuse tap available.
• 12–24 V DC with surge protection, 2-year UK warranty included.

• This reversing camera kit comes with a rear view mirror monitor display, fitted with a 7" LCD panel. This monitor secures itself to the existing interior mirror with strong, spring-loaded grips.
• Comes with a twin lens bracket camera, which houses both a 120° reversing camera for parking, and a 45°rear view camera for driving.
• Our most popular motorhome reversing camera kit, but also suitable for other vehicles such as a van.
• Choice of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down).
• The camera is fitted with a stainless steel bracket, which has proven itself to protect against rust.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• This reversing camera kit comprises of a bolt type number plate reverse camera, designed to fit to the number plate light area of your vehicle. Plus a top quality high resolution mirror monitor.
• The mirror monitor uses a high quality 7 inch LCD digital panel, that gives great colour and brightness. The monitor can be set up to display guidelines by attaching green wire to reverse light supply and setting them up in the menu system. You can even adjust the position of the guidelines inside the menu system. We include full instructions on this, which can be found further down this screen as a downloadable PDF.
• The bolt type number plate reversing camera has had an update for 2023. We have been so impressed with the quality of the PC4089 700TVL image sensor, combined with the all glass composite lenses (the same as we use with our brake light cameras), that we had the same factory make these reversing cameras with the same setup.
• The PC4089 sensor is one of the new generation of CMOS, which costs less to produce than CCD, but still has very good performance. We are then able to pass along the savings to you.
• The camera fixes to the vehicle via a bolt and nut, which the wire travels through in to the vehicle.
• The camera is fitted with a very wide angle lens, to be able to easily see all around the rear of the vehicle.

• This reversing camera kit comes with the mirror monitor. You may choose either the clip-over existing mirror version, which has strong spring loaded clamps that will secure it to your existing interior mirror, or attach directly to the windscreen with one of our bracket options (see description below for details on choosing the right bracket).
• This kit is supplied with a flush-fitting bumper reverse camera, usually fitted in the bumper but can be mounted anywhere that you can reach the rear to tighten the securing ring up.
• Choice of image sensor from : 1/3" Sony CCD (90 degree lens), 1/3" Sony CMOS (120 degree lens), or a 1/2.7" CMOS 2399 1080P (95 degree lens). 
• The reversing camera is fitted with built-in with IR LEDs to provide a good image in low light levels.  
• The camera is supplied with the correct sized hole saw for the camera body (28mm) to facilitate an easy installation. 
• The camera has a threaded body, it is supplied with angled rings and spacer rings that fit behind the bumper/body to make tightening up from the back a bit easier, plus a slight adjustment if using the angled rings (one on outside, corresponding one on inside).

• This parking camera kit comes with a 7 inch rear view mirror monitor that clips over your existing interior mirror using spring loaded clamps.  
• It also comes with the compact version of our bracket parking camera.  
• IR LEDs to give you night vision and the camera still uses the Sony 700TVL 1/3" CCD image sensor, so although it is smaller, it's still a powerful camera giving a nice sharp picture and working down to very low light conditions.  
• These smaller compact camera kits have been popular with 4x4 customers, a lot of people invert the brackets and mount underneath a step/bumper bar.
• Stainless steel brackets for long anti-rust protection.

• 7″ dash monitor with high-res panel
• Compact bracket camera (painted stainless steel bracket), mount vertical or horizontal
• Sony CCD 700TVL sensor for sharp image quality
• IP68 waterproof housing for protection
• Aviation 4-pin wiring, optional power adaptors
• 2-year UK warranty included

• This reversing camera kit comes with a rear view mirror monitor display, fitted with a 7" LCD panel. This monitor secures itself to the existing interior mirror with strong, spring-loaded grips.
• Comes with a numberplate reversing camera, fitted with one of two top specification image sensors - either the 600TVL PC1058 premium CMOS, or the upgrade option fitted with the GalaxyCore 1080P AHD (see more about the upgrade option further down).
• Fitted with a very wide angle (150 degrees) lens - ideal for parking.
• Premium Aspheric Lens - means that despite the extra wide angle, it minimises the "fish bowl" effect you see on cheaper cameras.
• Traditionally this style of camera has caused us and others a nightmare in terms of waterproofing (or lack of). The factory who produces this has done an amazing job and we have yet to have one leak after selling hundreds. The price of these to us are double what we would pay for most cameras, but they are the only factory that we trust with this style design. 
• Waterproof rating of this camera is IP69K - the highest possible.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• This reversing camera kit comes with a rear view mirror monitor display, fitted with a 7" LCD panel. This monitor secures itself to the existing interior mirror with strong, spring-loaded grips.
• Comes with a numberplate frame reversing camera, fitted with one of two top specification image sensors - either the 600TVL PC1058 premium CMOS, or the upgrade option fitted with the GalaxyCore 1080P AHD (see more about the upgrade option further down).
• Fitted with a very wide angle (150 degrees) lens - ideal for parking.
• Premium Aspheric Lens - means that despite the extra wide angle, it minimises the "fish bowl" effect you see on cheaper cameras.
• Traditionally this style of camera has caused us and others a nightmare in terms of waterproofing (or lack of). The factory who produces this has done an amazing job and we have yet to have one leak after selling hundreds. The price of these to us are double what we would pay for most cameras, but they are the only factory that we trust with this style design. 
• Waterproof rating of this camera is IP69K - the highest possible.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• 7″ LCD monitor with 800×480 resolution and vivid display
• Roof overhang pod camera with Sony 700TVL CCD sensor
• Optional AHD upgrade for sharper definition
• IP68 rated waterproof housing; robust overhang build
• 12-24V compatible; aircraft-grade wiring with locking 4-pin connector
• Extension plate available for thick rear doors
• 2-year UK warranty & lifetime support

• This reversing camera kit comprises of a bolt type number plate reverse camera, designed to fit to the number plate light area of your vehicle. Plus a top quality high resolution dash monitor.
• This dash monitor uses a high quality 5 inch LCD digital panel, that gives great colour and brightness.
• The bolt type number plate reversing camera has had an update for 2023. We have been so impressed with the quality of the PC4089 700TVL image sensor, combined with the all glass composite lenses (the same as we use with our brake light cameras), that we had the same factory make these reversing cameras with the same setup.
• The PC4089 sensor is one of the new generation of CMOS, which costs less to produce than CCD, but still has very good performance. We are then able to pass along the savings to you.
• The camera fixes to the vehicle via a bolt and nut, which the wire travels through in to the vehicle.
• The camera is fitted with a very wide angle lens, to be able to easily see all around the rear of the vehicle.

• This reversing camera kit comes with our popular clip-over mirror monitor, plus either a black or white coloured roof mount overhang camera.  
• These kits are popular with vans, as the camera body fixes to the roof, whilst its plastic body overhangs outwards with an adjustable ball camera at the end.  
• We do stock an extension plate that extends this camera even further out (in case you have very thick doors to get past).  The extension plate is available here.  
• The picture is very good as the camera comes with a Sony 700TVL 1/3" CCD image sensor inside and the monitor uses an 800x480 pixel digital panel screen. This combination gives a good resolution and good colour replication. 
• IR LEDs are used on the camera to give night vision in low light level conditions. 

• This reversing camera kit comes with surface mounted monitor display, fitted with a 7" LCD panel. This monitor comes with a dashboard mounting bracket, but also fits other mounting brackets.
• Comes with a twin lens bracket camera, which houses both a 120° reversing camera for parking, and a 45°rear view camera for driving.
• Choice of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down).
• The camera is fitted with a stainless steel bracket, which has proven itself to protect against rust.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• 7" dash monitor with high-resolution digital LCD display.
• White stainless-steel bracket camera with Sony CCD 700TVL sensor, optional Sony AHD 1080P upgrade.
• Choice of lens: 120° wide for reversing or 60° narrow for rear-view driving.
• IP68 waterproof housing with stainless bracket, anti-vibration design.
• All-in-one aviation cabling avoids CANBUS issues, optional lighter plug or fuse tap available.
• 12–24 V DC with surge protection, backed by 2-year UK warranty.

• This reversing camera kit comes with a rear view mirror monitor display, fitted with a 7" LCD panel. This monitor secures itself to the existing interior mirror with strong, spring-loaded grips.
• Comes with a white bracket reversing camera, fitted with one of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down).
• The camera is fitted with a stainless steel bracket, which has proven itself to protect against rust.
• Choice of lens angle : 120 degrees for general use and parking, or 60 degrees if you plan to only use for rear view/driving (looking back down the road).
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• Reversing camera kit with a white slimline camera and a 7 inch mirror monitor (choice of clip-over type or bracket to windscreen mounting plate type).
• Very high quality mirror monitor, the best quality we have found over the many years we have been sourcing quality products.
• Two choices of spec level, both premium. Choose from 700tvl high resolution 4089 image sensor and 800x480 pixel digital panel LCD monitor panel, or upgrade to the latest 1080P high definition 2399 image sensor and 1024x600 pixel IPS monitor panel.
• Fitted with a high-quality all-glass lens with a very wide angle (150 degrees) - ideal for parking.
• The waterproof rating of this camera is IP68, more than enough to cope with the great British weather.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• This reversing camera kit comes with a rear view mirror monitor display, fitted with a 7" LCD panel. This monitor secures itself to the existing interior mirror with strong, spring-loaded grips.
• Comes with a twin lens bracket camera, which houses both a 120° reversing camera for parking, and a 45° rear view camera for driving.
• Our most popular motorhome reversing camera kit, but also suitable for other vehicles such as a van.
• Choice of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down).
• The camera is fitted with a stainless steel bracket, which has proven itself to protect against rust.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• The reversing camera kit + additional camera comes with a rear view mirror monitor display, which is fitted with a 7" LCD panel. This monitor secures itself to the existing interior mirror with strong, spring-loaded grips.
• Popular with customers who require two cameras in two different locations, such as horsebox owners. The cameras can be used both inside and outside.
• Comes with two black bracket cameras, fitted with one of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down). Switch between the two with the V1/V2 button on the monitor, or by attaching the trigger wire to reverse light feed.
• The cameras are fitted with a stainless steel bracket, which has proven itself to protect against rust.
• 120 degree wide angle lens fitted to cameras.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• The reversing camera kit + additional camera comes with a rear view mirror monitor display, which is fitted with a 7" LCD panel. This monitor secures itself to the existing interior mirror with strong, spring-loaded grips.
• Popular with customers who require two cameras in two different locations, such as horsebox owners. The cameras can be used both inside and outside.
• Comes with two white bracket cameras, fitted with one of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down). Switch between the two with the V1/V2 button on the monitor, or by attaching the trigger wire to reverse light feed.
• The cameras are fitted with a stainless steel bracket, which has proven itself to protect against rust.
• 120 degree wide angle lens fitted to cameras.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• The reversing camera kit comes with a heavy duty surface mounted monitor display, fitted with a 7" LCD panel. This monitor comes with a "U shape" dashboard mounting bracket that fits to the side mounting points. It also has a rear channel to fit our other mounting brackets.
• Popular with customers who require two cameras in two different locations, such as horsebox owners. The cameras can be used both inside and outside.
• Comes with two black bracket cameras, fitted with one of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down). Switch between the two with the channel number buttons on the monitor, or by attaching the trigger wire to reverse light feed.
• The cameras are fitted with a stainless steel bracket, which has proven itself to protect against rust.
• 120 degree wide angle lens fitted to cameras.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• The reversing camera kit comes with surface mounted monitor display, fitted with a 7" LCD panel. This monitor comes with a dashboard mounting bracket, but also fits other mounting brackets.
• Popular with customers who require two cameras in two different locations, such as horsebox owners. The cameras can be used both inside and outside.
• Comes with two black bracket cameras, fitted with one of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down). Switch between the two with the CAM button on the monitor, or by attaching the trigger wire to reverse light feed.
• The cameras are fitted with a stainless steel bracket, which has proven itself to protect against rust.
• 120 degree wide angle lens fitted to cameras.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• The reversing camera kit comes with surface mounted monitor display, fitted with a 7" LCD panel. This monitor comes with a dashboard mounting bracket, but also fits other mounting brackets.
• Popular with customers who require two cameras in two different locations, such as horsebox owners. The cameras can be used both inside and outside.
• Comes with two black bracket cameras, fitted with one of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down). Switch between the two with the CAM button on the monitor, or by attaching the trigger wire to reverse light feed.
• The cameras are fitted with a stainless steel bracket, which has proven itself to protect against rust.
• 120 degree wide angle lens fitted to cameras.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.