Adaptors for reversing cameras

Occasionally you meet a situation where you need to get two male 4 pin aviation reversing camera plugs to join up with each other. This cable allows you to do so.

We occasionally get asked by customers for a cable to change the gender of a 4 pin aviation cable, this cable has male connectors both ends, meaning it can change a female connection in to a male connection.

• 4-pin aviation reversing camera splitter adaptor for feeding one camera to two monitors
• Independent 2.1 mm DC power input allows cameras to be powered separately from the monitors
• Ideal for motorhomes and campervans with front and rear monitors used at different times
• Allows either monitor to be used on its own without powering the other monitor
• Suitable for keeping an eye around the vehicle when parked or stationary
• Compatible with standard definition (CVBS) and AHD high definition camera systems
• Works with single or multiple camera installations when paired with DC splitters

We were frequently getting asked for a reversing camera cable splitter cable to allow one feed to go to 2x monitors, or 1x monitor and 1x MDVR.  This cable achieves this.

ACC093 - BNC Plug to RCA Phono (Female)

The piggyback fuse holders have become a popular method of providing power to the reversing camera system due to their ease and simplicity. We provide a 3 amp fuse that fits in the top slot which is the correct rating for all of our reversing camera kits, the lower slot will accept the original fuse to whatever circuit you are tapping off. You then attach the red wire to the power supply of the monitor either with the crimp, or by cutting that off and soldering (our preferred method).

The piggyback fuse holders have become a popular method of providing power to the reversing camera system due to their ease and simplicity. We provide a 3 amp fuse that fits in the top slot which is the correct rating for all of our reversing camera kits, the lower slot will accept the original fuse to whatever circuit you are tapping off. You then attach the red wire to the power supply of the monitor either with the crimp, or by cutting that off and soldering (our preferred method).

Sometimes you wish to split one power supply cable so that it powers two separate devices eg a monitor and an MDVR, or two phono/RCA based reversing cameras. This cable allows you to do so.

Sometimes you wish to split one power supply cable so that it powers four separate devices eg four phono/RCA based reversing cameras. This cable allows you to do so.

We had these made up so that they would plug in to the 2.1mm DC sockets that are on most of our monitor wiring harnesses.  Fuse taps are a convenient way to tap into a power supply for your new camera system.

We had these made up so that they would plug in to the 2.1mm DC sockets that are on most of our monitor wiring harnesses.  Fuse taps are a convenient way to tap into a power supply for your new camera system.

We had these made up so that they would plug in to the 2.1mm DC sockets that are on most of our monitor wiring harnesses.  Fuse taps are a convenient way to tap into a power supply for your new camera system.

On agricultural machinery, there is often a 3-pin power socket, sometimes referred to as a "D-Plug" due to the shape of the connector. This power lead has been designed to plug into this and provides a 2.1mm/5.5mm DC plug that can be inserted into most of our reversing camera monitors. 

A 12V lighter plug connection is still a popular option for people who either wish to test their reversing camera kit before hardwiring in, or for people who want the ultimate easy install.

99% of the time, if you see a DC socket on a reversing camera or monitor, it will be a 2.1mm/5.5mm connector.  This wire allows you to provide power to this type of socket, and has an inline 3 amp fuse on the red input wire. Total length of this power adaptor is 150CM.

This is a 3 amp fused 2.1mm/5.5mm DC socket with 100cm red (+12/24V) and black (earth) wire attached. This is used in instances where you have bare red/black wires that you wish to connect one of our extensive range of adaptors with DC plugs to.