4 Pin Screw Connector Cables for reversing cameras

4 Pin Screw Connector Cables for reversing cameras

High-quality 4-pin aviation extension cables with secure screw connectors. Built with pure copper cores for reliable signal and durability in all weather. Available in single or twin-channel versions from 1 metre up to 20 metre to suit cars, vans, motorhomes and HGVs.

Single Channel 4 Pin Cables for reversing cameras

Single Channel 4 Pin Cables for reversing cameras

Twin Channel 4 Pin Cables for reversing and rear view cameras

Twin Channel 4 Pin Cables for reversing and rear view cameras

Page of 2
12.5M - Twin 4 Pin Aviation Screw Connector Extension Cable for 2 reversing cameras | CAB12Y

12.5M - Twin 4 Pin Aviation Screw Connector Extension Cable for 2 reversing cameras | CAB12Y

  • Our 12.5M length two channel/signal 4 pin top quality extension cable for reversing cameras. 
  • We call these Y cables, since the shape of the ends look like the letter Y, as they are a single cable to make running cables easier, but then split to two male connectors for the reversing/rear view cameras, and two female connectors to feed a monitor.
  • Fully waterproof connection, comes with screw locking collar that compresses the connection against the rubber O ring inside.
  • Our extension cables are made from pure copper (not the cheaper CCA/CCS which is prone to failure).
  • The cable has screening around the video signal wire, as well as aluminium foil around covering all of the wires inside the cable - to protect against outside interference, as well as allowing you to coil up any excess cable.
  • This cable is not suitable for the latest range of 1080P AHD reversing cameras (although we have developed a version of this cable that is currently being produced that will be). Our single channel cables will support the high frequency AHD cameras until we get the new design twin cables delivered.
  • This cable is sometimes known as a 4 pin aviation connector cable.

£18.50

VAT Included £3.08
View/Buy
12.5M (with 8mm link) - Twin 4 Pin Aviation Screw Connector Extension Cable for 2 reversing cameras | CAB12Y-8mm

12.5M (with 8mm link) - Twin 4 Pin Aviation Screw Connector Extension Cable for 2 reversing cameras | CAB12Y-8mm

  • Our 12.5M length two channel/signal 4 pin top quality extension cable for reversing cameras. 
  • This version comes with a small 8mm diameter disconnect link point 100cm back from the connector at the front of the cable. This was placed there so that the larger 15mm diameter connector could be unplugged (to get through tight gaps) and then reconnected once you arrive close to your monitors channel inputs.
  • We call these Y cables, since the shape of the ends look like the letter Y, as they are a single cable to make running cables easier, but then split to two male connectors for the reversing/rear view cameras, and two female connectors to feed a monitor.
  • Fully waterproof connection, comes with screw locking collar that compresses the connection against the rubber O ring inside. Please note that the 8mm disconnect link isn't waterproof, so will need to be inside (as this is placed at the front of the cable, this part is usually next to the monitor and isn't an issue).
  • Our extension cables are made from pure copper (not the cheaper CCA/CCS which is prone to failure).
  • The cable has screening around the video signal wire, as well as aluminium foil around covering all of the wires inside the cable - to protect against outside interference, as well as allowing you to coil up any excess cable.
  • This cable is not suitable for the latest range of 1080P AHD reversing cameras (although we have developed a version of this cable that is currently being produced that will be). Our single channel cables will support the high frequency AHD cameras until we get the new design twin cables delivered.
  • This cable is sometimes known as a 4 pin aviation connector cable.

£19.50

VAT Included £3.25
View/Buy
15M - Twin 4 Pin Aviation Screw Connector Extension Cable for 2 reversing cameras | CAB15Y

15M - Twin 4 Pin Aviation Screw Connector Extension Cable for 2 reversing cameras | CAB15Y

  • Our 15M length two channel/signal 4 pin top quality extension cable for reversing cameras. 
  • We call these Y cables, since the shape of the ends look like the letter Y, as they are a single cable to make running cables easier, but then split to two male connectors for the reversing/rear view cameras, and two female connectors to feed a monitor.
  • Fully waterproof connection, comes with screw locking collar that compresses the connection against the rubber O ring inside.
  • Our extension cables are made from pure copper (not the cheaper CCA/CCS which is prone to failure).
  • The cable has screening around the video signal wire, as well as aluminium foil around covering all of the wires inside the cable - to protect against outside interference, as well as allowing you to coil up any excess cable.
  • This cable is not suitable for the latest range of 1080P AHD reversing cameras (although we have developed a version of this cable that is currently being produced that will be). Our single channel cables will support the high frequency AHD cameras until we get the new design twin cables delivered.
  • This cable is sometimes known as a 4 pin aviation connector cable.

£21.00

VAT Included £3.50
View/Buy
15M (with 8mm link) - Twin 4 Pin Aviation Screw Connector Extension Cable for 2 reversing cameras | CAB15Y-8mm

15M (with 8mm link) - Twin 4 Pin Aviation Screw Connector Extension Cable for 2 reversing cameras | CAB15Y-8mm

  • Our 15M length two channel/signal 4 pin top quality extension cable for reversing cameras. 
  • This version comes with a small 8mm diameter disconnect link point 100cm back from the connector at the front of the cable. This was placed there so that the larger 15mm diameter connector could be unplugged (to get through tight gaps) and then reconnected once you arrive close to your monitors channel inputs.
  • We call these Y cables, since the shape of the ends look like the letter Y, as they are a single cable to make running cables easier, but then split to two male connectors for the reversing/rear view cameras, and two female connectors to feed a monitor.
  • Fully waterproof connection, comes with screw locking collar that compresses the connection against the rubber O ring inside. Please note that the 8mm disconnect link isn't waterproof, so will need to be inside (as this is placed at the front of the cable, this part is usually next to the monitor and isn't an issue).
  • Our extension cables are made from pure copper (not the cheaper CCA/CCS which is prone to failure).
  • The cable has screening around the video signal wire, as well as aluminium foil around covering all of the wires inside the cable - to protect against outside interference, as well as allowing you to coil up any excess cable.
  • This cable is not suitable for the latest range of 1080P AHD reversing cameras (although we have developed a version of this cable that is currently being produced that will be). Our single channel cables will support the high frequency AHD cameras until we get the new design twin cables delivered.
  • This cable is sometimes known as a 4 pin aviation connector cable.

£22.00

VAT Included £3.67
View/Buy
20M - Twin 4 Pin Aviation Screw Connector Extension Cable for 2 reversing cameras | CAB20Y

20M - Twin 4 Pin Aviation Screw Connector Extension Cable for 2 reversing cameras | CAB20Y

  • Our 20M length two channel/signal 4 pin top quality extension cable for reversing cameras. 
  • We call these Y cables, since the shape of the ends look like the letter Y, as they are a single cable to make running cables easier, but then split to two male connectors for the reversing/rear view cameras, and two female connectors to feed a monitor.
  • Fully waterproof connection, comes with screw locking collar that compresses the connection against the rubber O ring inside.
  • Our extension cables are made from pure copper (not the cheaper CCA/CCS which is prone to failure).
  • The cable has screening around the video signal wire, as well as aluminium foil around covering all of the wires inside the cable - to protect against outside interference, as well as allowing you to coil up any excess cable.
  • This cable is not suitable for the latest range of 1080P AHD reversing cameras (although we have developed a version of this cable that is currently being produced that will be). Our single channel cables will support the high frequency AHD cameras until we get the new design twin cables delivered.
  • This cable is sometimes known as a 4 pin aviation connector cable.

£26.00

VAT Included £4.33
View/Buy
Page of 2

4 Pin Screw Connector Cables for reversing cameras

Reliable 4-pin aviation (GX12) extension cables for reversing cameras. We’ve used this connector type since 2007 for its secure screw-lock, weather resistance and long service life.

  • Pure copper cores for low signal loss — never CCA/CCS.
  • Outdoor-ready: rain and freezing-temperature tolerant.
  • Single-channel or twin-channel options to suit your system.
  • Lengths from 1 metre to 20 metre, including 7.5 metre and 12.5 metre.
  • 8 mm disconnect variants available on selected lengths.

Quick length guide

1–3 metre Short runs / agricultural machinery
5 metre Cars and general use
7.5 metre Long cars / short vans
10 metre Most standard vans
12.5 metre Motorhomes / long vans
15–20 metre Long motorhomes, HGVs and trailers

Choose Single-channel if you’re carrying one video feed. Choose Twin-channel to run reversing and rear-view (or a second camera) down one cable. If you’re unsure which to pick, get in touch and we’ll point you to the right option.