Reversing Cameras UK

• This reversing camera kit comes with a rear view mirror monitor display, fitted with a 7" LCD panel. This monitor secures itself to the existing interior mirror with strong, spring-loaded grips.
• Comes with a twin lens bracket camera, which houses both a 120° reversing camera for parking, and a 45° rear view camera for driving.
• Our most popular motorhome reversing camera kit, but also suitable for other vehicles such as a van.
• Choice of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down).
• The camera is fitted with a stainless steel bracket, which has proven itself to protect against rust.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• This reversing camera kit comes with a rear view mirror monitor display, fitted with a 7" LCD panel. This monitor secures itself to the existing interior mirror with strong, spring-loaded grips.
• Comes with a black bracket reversing camera, fitted with one of two top specification image sensors - either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down).
• The camera is fitted with a stainless steel bracket, which has proven itself to protect against rust.
• Choice of lens angle : 120 degrees for general use and parking, or 60 degrees if you plan to only use for rear view/driving (looking back down the road).
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• This reversing camera kit comes with a rear view mirror monitor display, fitted with a 7" LCD panel. This monitor secures itself to the existing interior mirror with strong, spring-loaded grips.
• Comes with a diamond shaped reversing camera, fitted with one of two top specification image sensors - either the PC4089 700TVL or C2399 1080P AHD (see more about the upgrade option further down).
• Fitted with a high quality 150 degree wide angle lens - the same all glass composite as we use in our brake light cameras, which avoids the gradual fading over time compared to the cheaper 2xglass, 2xplastic lenses commonly fitted elsewhere.
• Designed to be mounted on the rear wall of a vehicle - ideally high up.
• Can be adjusted to look downwards, or backwards.
• Recently introduced in 2023, quickly becoming popular with Motorhome and Van owners.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

• This reversing camera kit comes with a rear view mirror monitor display, fitted with a 7" LCD panel. This monitor secures itself to the existing interior mirror with strong, spring-loaded grips.
• Comes with a numberplate frame reversing camera, fitted with one of two top specification image sensors - either the 600TVL PC1058 premium CMOS, or the upgrade option fitted with the GalaxyCore 1080P AHD (see more about the upgrade option further down).
• Fitted with a very wide angle (150 degrees) lens - ideal for parking.
• Premium Aspheric Lens - means that despite the extra wide angle, it minimises the "fish bowl" effect you see on cheaper cameras.
• Traditionally this style of camera has caused us and others a nightmare in terms of waterproofing (or lack of). The factory who produces this has done an amazing job and we have yet to have one leak after selling hundreds. The price of these to us are double what we would pay for most cameras, but they are the only factory that we trust with this style design. 
• Waterproof rating of this camera is IP69K - the highest possible.
• Easy to install, with a range of power options. Just one power connection powers the system.
• 2 Year Guarantee and Lifetime Support from the leading UK specialists.

Our reversing camera kit comprises our black bracket camera and our top-quality 7" stand-on-dash monitor. This kit comes with the following advantages :

• Choice of Reversing / Rear View - You can choose to make this system a rear view camera kit by selecting the narrow angle lens option. This will give you a more narrow view, which is ideal when pointing backwards down the road, as it give a better more accurate distance perception of following vehicles.
• Increased Reversing Safety - Reversing accidents account for almost 25% if all vehicle accidents in the UK. The reverse camera in this kit will help to give greater vision to the driver to help avoid these collisions.
• High Resolution 7 inch Display - The monitor uses one of the best performing LCD panels we have seen. It is produced by our highest rated monitor factory, which we have used for many years now.
• Rust Proof Stainless Steel Bracket - The rear camera is fitted with a painted stainless steel bracket, which is time-tested to resist rusting - unlike the usual mild steel brackets that are sold elsewhere.
• Sony Image Sensor Fitted - The image sensor is the part of the camera that captures the colour/light in order to construct an image. It is one of the most important factors in producing a good quality image. We have a choice of two options when ordering, both are great. You can choose the Sony 811 1/3" CCD or the Upgraded Sony IMX307 1/2.9" AHD 1080P image sensor. Both will give you good colours, resolution, and dynamic range, although the AHD would win in a head to head.
• Two Year Guarantee - We guarantee all of the parts in this camera kit to be free from defect/fault for two years after sale. Our fault rate is extremely low, but should you find you are unlucky, we will support you with any replacement parts/repairs.
• Easy Fit Cabling - From our easy wire fuse tap/lighter plug options, to our all in one 4 pin cabling that allows the monitor to power the camera whenever you want to view, this reversing camera kit will be easy to wire up.

• Brake light reversing camera to fit Fiat Ducato 2006-Present, Citroen Relay 2006-Present, Peugeot Boxer 2006-Present, and Vauxhall Movano 2022-Present vans.
• Top quality 7 inch rear view mirror monitor display, with options to either clip over existing mirror, or attach directly to the windscreen fitment.
• Two swan neck brackets are selectable depending on the metal windscreen fitment/button that is present on your van. If you have nothing present, we supply a swan neck bracket that allows you to add a fitting/button (with loctite 319 glue).
• 2 Year Guarantee with the specialists - Reversing Cameras UK Ltd.

• Twin Lens brake light reversing + driving rear view camera to fit Fiat Ducato 2006-Present, Citroen Relay 2006-Present, Peugeot Boxer 2006-Present, and Vauxhall Movano 2022-Present vans.
• Top quality 7 inch rear view mirror monitor display, with options to either clip over existing mirror, or attach directly to the windscreen fitment.
• Two swan neck brackets are selectable depending on the metal windscreen fitment/button that is present on your van. If you have nothing present, we supply a swan neck bracket that allows you to add a fitting/button (with loctite 319 glue).
• 2 Year Guarantee with the specialists - Reversing Cameras UK Ltd.

• Upgraded 4089 High-Resolution Image Sensor - We don't settle the base level image sensor on our brake light cameras. We have opted for the 4089 700tvl image sensor, which is respected for its good colour replication, high resolution, and low light-level sensitivity.
• Premium 7" High-Resolution Digital LCD Panel Display - We have the high resolution digital LCD panels installed on this monitor. They provide great replication of colour and a sharp image.
• Night Vision IR LED's - A ring of separated Infra Red LED's provide the reverse camera with the ability to see hazards behind your van at night time. Don't worry about the light blinding other road users - it is visible to the camera but invisible to the human eye.
• 160° Extra Wide Viewing Angle Lens - We opt for the more expensive all-glass-composite lenses to be installed to our brake light cameras. This gives a very clear, undistorted view from the camera. It also prolongs the clear image compared to the cheaper plastic/glass composite lenses often seen elsewhere, where the plastic degrades and fades over time due to UV damage.
• Two-Year Guarantee - We consider the brake light manufacturer producing our cameras the best we have seen in our long experience. They stand by their product by fully supporting our 24-month guarantee period for brake light cameras. The monitor is also super reliable and will carry on working for many years to come. The monitor is also covered by the same two year guarantee period. Our extension cables, being pure copper, are highly unlikely to degrade, but for your reassurance, they are protected, too. In the unlikely event of a fault with any part of this kit during this period, we will provide a replacement.
• Great Factory-Look Appearance - This brake light reversing camera retains the factory look of your Trafic/Vivaro van. The camera is made to be an exact fit replacement for your existing high-level brake light.
• Increased Safety - Most importantly, this product will increase the safety of your van due to the increased visibility to the rear of your van. In the UK almost a quarter of all vehicle accidents occur whilst reversing. Decrease the risk of collision and injury by fitting this great quality brake light reverse camera.
• Optional Guidelines - The camera will show static coloured guidelines as standard. You can remove this and have no guidelines shown using the trigger loop next to the 4 pin connector.
• Various Monitor Bracket Options - See our guide below for the various mounting bracket options for the monitor. As standard, a "butterfly" bracket is included; alternative types can be ordered via the drop-down menu above.

• Comes with a 5 inch high resolution digital panel heavy duty monitor.
• Comes with one of our high spec bracket cameras, that is fitted with a high performance Sony 1/3" CCD 700TVL image sensor.
• The camera bracket is made from painted stainless steel, which avoids the rusting you will see on mild steel brackets that are commonly sold elsewhere.
• This kit comes with a 2 year guarantee from us - REVCAMUK. Our reputation on forums and groups will show how trusted we are to look after our customers.
• The parts that make up this kit are all sourced from the best factories that we have found across our many years of experience. We don't source the cheapest parts, we source based on reliability and quality.
• This kit can be used with both 12V and 24V vehicles. The voltage to the reverse camera is regulated by the monitor.
• Our extension cables are high quality, with the inner cores consisting of pure copper.

• Comes with a 5 inch high resolution digital panel heavy duty monitor.
• Comes with one of our popular high spec twin cameras, that is fitted with two high performance Sony 1/3" CCD 700TVL image sensors. One with an 8mm lens to provide approx 45 degree narrow angle for driving/rear view, and one with a 2.8mm lens to provide approx 120 degree wide angle for reversing.
• The camera bracket is made from painted stainless steel, which avoids the rusting you will see on mild steel brackets that are commonly sold elsewhere.
• This kit comes with a 2 year guarantee from us - REVCAMUK. Our reputation on forums and groups will show how trusted we are to look after our customers.
• The parts that make up this kit are all sourced from the best factories that we have found across our many years of experience. We don't source the cheapest parts, we source based on reliability and quality.
• This kit can be used with both 12V and 24V vehicles. The voltage to the reverse camera is regulated by the monitor.
• Our extension cables are high quality, with the inner cores consisting of pure copper.

This is a very nice white dome camera that comes with our best image sensor. Cable length of 5-20M can be selected inside listing. These cameras come with the 1/3" Sony CCD sensor and give a very good image.

• Two Cameras In One Bracket - The twin lens reversing camera is actually two individual cameras that mount to the same painted stainless steel bracket.
• Narrow-Angle for Rear View + Wide Angle for Parking - Different lens angles for different functions. The narrow-angle lens is suited for always-on rear view driving cameras - as the distance perception is less distorted than a wider angle lens. The 8mm fitted long-distance lens performs brilliantly when monitoring traffic driving behind your vehicle. The wide-angle lens in the downward-facing reversing camera works brilliantly to give a big spread behind to allow you to see hazards.
• Anti-Rust Stainless Steel Bracket - We have been using stainless steel brackets on most of our bracket cameras since the early 2010's. Ever since the upgrade we have never had a customer request a new bracket to replace a rusty one. With non-stainless steel people sometimes see rusting occur within as little as 2 weeks. We believe you shouldn't have to suffer unattractive rusty brackets on the back of your vehicle, with the associated orange streaks running down.
• Always On Functionality and Safety - The twin/dual lens cameras are designed to be on for the entire journey, improving your visibility/safety 100% of the journey vs the 1 or 2% of the time you are in reverse.
• Sony 700tvl CCD Image Sensors - The Sony 811 960H 700tvl Image Sensors fitted to BOTH cameras provide a high-resolution image with excellent colour replication in the day and good night vision in the dark.
• Popular for Vans and Motorhomes - This type of camera is most popular with van and motorhome owners who often have poor visibility to the rear when driving. This setup gives them an amazing rearview mirror view, as well as showing them the rear of their vehicles when reversing to avoid hitting anything.
• Night Vision IR LED's - The cameras have IR LED's fitted to allow the camera to see in the dark. No need to worry about this disturbing following vehicles since the Infra Red Light they emit is below the visible spectrum of the human eye. This means you get a great night vision image on your display and people behind you don't suffer any glare from a light.
• IP68 Waterproof - These cameras are rated at IP68, which means they are protected against the very worst of the Great British weather.
• Small Entry Hole Size Disconnect Points (Optional to Remove when Ordering) - As standard we will provide the camera with small 8mm disconnect points to allow for smaller hole size for cable entry. These smaller disconnects aren't waterproof, so if you can't get them inside the body of your vehicle within 30cm please select the non-8mm version option above.

Retrofit brake light reversing camera + rear view camera to fit the Citroen Relay, Peugeot Boxer, and Fiat Ducato vans built between 2006 and present. As of 2022, this camera now also fits Vauxhall Movano vans built from that year to the present. Achieve reversing safety, as well as improving your rear vision with the permanently on driving camera. The second camera is designed to help you to monitor traffic behind you. This means your brake light camera is useful 100% of the time instead of just the approximately 0.1-2% of your journey that you are backing up. Both cameras are high resolution with a quality PC4089 image sensor fitted. Two-year guarantee with the UK's forum favourite reversing camera specialists.

These cable adaptors will convert the 2010 onwards Waeco cable fitted on vehicles like Baileys to a single 4 pin socket/plug like we use on our single camera systems. Both front and rear adaptors are provided. These cables are not made by Waeco, just compatible.  We only sell these as pairs because we have found the inside of the cables to be wired in differently, so you may not be able to just plug in one side and replace just one part, you would need to replace both monitor and camera.

This will convert our 4 pin reversing cameras to a conventional RCA/2.1mm DC connection if you wish to connect to an RCA monitor or stereo headunit