5" Dash Monitor + Sony CCD White Twin Lens Bracket Reversing & Rearview Camera Kit - PM53W

Price

£230.00

VAT Included £38.33
Availability IN STOCK
Product Code: KIT-PM53W
Length of cable
Add extra monitor bracket?
Add a lighter plug?
Add a fuse tap?
Quantity
(from 1 to 18)

If you'd like this by

Order within ::

(Please select Next Day Delivery Option - Mainland UK only) Terms Apply

Description

Introducing the 5 inch monitor + white reversing + driving twin camera kit

  • Comes with a 5 inch high resolution digital panel heavy duty monitor.
  • Comes with one of our popular high spec twin cameras, that is fitted with two high performance Sony 1/3" CCD 700TVL image sensors. One with an 8mm lens to provide approx 45 degree narrow angle for driving/rear view, and one with a 2.8mm lens to provide approx 120 degree wide angle for reversing.
  • The camera bracket is made from painted stainless steel, which avoids the rusting you will see on mild steel brackets that are commonly sold elsewhere.
  • This kit comes with a 2 year guarantee from us - REVCAMUK. Our reputation on forums and groups will show how trusted we are to look after our customers.
  • The parts that make up this kit are all sourced from the best factories that we have found across our many years of experience. We don't source the cheapest parts, we source based on reliability and quality.
  • This kit can be used with both 12V and 24V vehicles. The voltage to the reverse camera is regulated by the monitor.
  • Our extension cables are high quality, with the inner cores consisting of pure copper.

Add an additional monitor bracket/mount

We can supply a discounted additional mount/bracket for the monitor when ordered at the same time as the kit.  Please see the photo below, and make your selection using the drop down menu above the add to cart button.

Brackets and mounts for reversing camera display/monitor

See our video below for details about the brackets in the photo above.


Choice of kit power options

  • On the monitor wiring harness is a 2.1mm DC socket. On the drop down menu of this product, you can select your desired power lead to plug in to this.
  • The standard hardwiring is supplied with all options, this terminates in a red wire (+12V/+24V), and black wire (earth).
  • For the ultimate quick install is a lighter plug option. Some people also order this just for the initial setup, before changing to the standard hardwiring/fuse tap.
  • Fuse taps aka piggyback fuse holders, are the most recent addition to our options. This allows you to "piggyback" off an existing circuit from your fuse box. The most common size fuse found in modern vehicles is the mini blade (size = 10.9mm wide x 16.4mm tall), older vehicles are likely to have the standard blade (size = 19.1mm wide x 18.8mm tall). Download and read our Fuse Tap installation instructions PDF for more information.
  • Our fuse taps were designed by us, they have a 200cm lead that connects directly to the monitor socket with no soldering / crimping required. There is a black wire with an earth terminal attached - designed to fix to a chassis bolt/screw.  This earth wire/terminal can be separated away from the red wire to enable you to find the most convenient ground/earth (although often this is next to the fuse box).
Power Supply Options including lighter plug and piggyback fuse taps

Easy-Fit Wiring

  • We have been using this type of cabling since 2007, and it has performed perfectly in all of this time. It is called the 4 pin aviation cable, and uses what is known as a 4 pin GX12 connector.
  • This type of connector is very durable, and can be kept outside exposed to rain and freezing temperatures.
  • It makes fitting easier, and avoids CANBUS issues due to the monitor powering the camera.
  • It keeps contacts clean and dry, plus prevents them from accidental separation.
  • It has become the industry standard connector, which means you aren't forced to buy future cameras/cables/upgrades from one retailer - as parts are interchangeable between numerous suppliers (although we are confident you will be impressed enough with us that you will choose us for any future upgrades/spare parts).
  • All of our aviation extension cables are high quality, with the inner cores consisting of pure copper. We do not use the cheaper CCA (Copper Coated Aluminium) or CCS (Copper Coated Steel) cables, because they are more prone to failure/degradation over time.

Disconnectable Connectors for smaller cable entry holes

We took the step of adding 8mm disconnect points between the 4 pin connectors and the camera. This allows you to drill smaller cable entry holes instead of the 19mm you would need if using the pre-attached cable rubber Grommet (we still have these grommets inserted for those that prefer to use this method).

Disconnect points for twin lens camera

If you plan to keep the connections externally eg running the cables along the roof, please leave us a note informing us, so that we can ensure that either a waterproofed 8mm disconnect version is sent (or a version with no 8mm disconnect point at all).


Anti-Corrosion Stainless Steel Camera Bracket

The camera has a stainless steel bracket, which is shown to last a very long time without corrosion unlike mild steel we have seen from most other retailers, which tends to rust in a matter of a few months.

stainless steel bracket for reversing camera

2 Year Guarantee

We supply with a 2 year Guarantee with us, meaning we will repair or replace any non-user damaged parts that are deemed faulty.  Our failure rate is very low even beyond these two years, if you have a problem outside of 2 years we should still have compatible parts and possible repairs for reasonable amounts.


Parts Tested in the UK

The parts of this kit will have been tested twice, once by the factory and once by us.  We check all the items in the kit including all cables, trigger wires, IR leds and menu functions to reduce any chance of having a non working part.  Our fault rate is extremely low, and we just like to ensure that we avoid any imperfection slipping past.  This is why professional fitters love us.  

Detailed Images

Yes you can.  This kit has two cameras built in to one bracket.  The one camera looks back down the road as your driving camera (acts as a rear view mirror).  The other camera points downwards to the ground, you will select this camera when you are reversing/parking.

Absolutely.  This camera can be mounted both on a vertical surface eg rear wall/door, or on a horizontal surface eg roof/top of door.

Our easy wire fuse tap options are new for 2023.  We designed a fuse tap that plugs in to a socket that is present on all of our monitor wiring harnesses.  The other side has a "piggyback" fuse holder aka fuse tap.  You identify a fuse in the fuse box that comes on/off with the ignition (see piggyback fuse holder / fuse tap instructions here - PDF download).  The original fuse is placed in to the new fuse tap, plus there is a new fuse already present for the reverse camera kit.  On the same wiring there is an earth terminal connector, simply attach this to a chassis bolt (usually near the fuse box, or add your own).

Rough guide:

  • 5M is good for a small van
  • 10M is good for a medium length van (around 6M)
  • 10M 8mm joint (same as above but with a small 8mm disconnect point on the front of the cable to allow cable to get through tight spots/bulkheads)
  • 12.5M is good for most vehicles up to around 8.5M long (covers most motorhomes except the super long)
  • 12.5M 8mm joint (same as above but with a small 8mm disconnect point on the front of the cable to allow cable to get through tight spots/bulkheads)
  • 15M is good for vehicles up to around 10/11M eg rigid lorry, small coach.
  • 15M 8mm joint (same as above but with a small 8mm disconnect point on the front of the cable to allow cable to get through tight spots/bulkheads)
  • 20M is good for super long vehicles
Twin reversing camera cable 8mm disconnect point

Yes.  Please select the option at the bottom of the cable length drop down menu.  It will be labelled 2010+ Dometic/Waeco adaptors.  Instead of a long cable, you will receive the twin channel Waeco/Dometic adaptor set.

Our general 4 pin cable reversing camera kit based fitting instructions.

4 pin reversing camera kit fitting instructions

Covers the fixing of our twin lens reversing camera to the vehicle

Monitor

5” Colour LCD screen
Power supply: 12V/24V
Power Consumption: 4W Max
Digital Screen Resolution: 800 x3(RGB)x480
Luminance: 350cd/m2
2 Inputs
PAL/NTSC/AUTO
Full function Remote Control

Camera

Image Device:1/3 SONY 811 CCD 960H 700TVL
TV System: PAL
Effective Pixels: 976*582
Scanning System: 2:1 Interlace
Sync. System: Internal
Resolution: 700 TV lines
Minimum Illumination:0 Lux (IR leds on)
Waterproof to Ip68
Infra red LEDs to provide night view
Two Cameras one with wide 120 degree lens and one with narrow 45 degree lens
Mirror image only
Stainless Steel Bracket (painted)