Bullet Bumper Reversing Camera | Sony CCD | 4 pin connector | CAM038

Price

£75.00

VAT Included £12.50
Availability IN STOCK
Product Code: CAM038
Extension Cable?
Quantity
(from 1 to 11)

If you'd like this by

Order within ::

(Please select Next Day Delivery Option - Mainland UK only) Terms Apply

Description

Flush fitting Bumper Reversing Camera fitted with a premium Hi-Res 600TVL 1/3" Sony CCD image sensor

This camera is very flexible in where it is mounted, if there is a flat surface (eg bumper) where you can access the rear to tighten up, then it can be fitted. 

This camera is unlike similar looking cameras as it has a mechanical seal, the front is screwed on using a thread and secured against a rubber seal.  This stops the problem we have seen with other manufacturers, where sealant is used to glue the glass in and if it isn't perfect then water can get in.

Image Sensor for Camera

An image sensor is the part of the camera that detects and captures information to make an image, there are various sizes of sensor usually between 1/4" and 1/3" with the larger sensors able to capture more detail.  In the old days, you used to have to pick CCD for quality as CMOS wasn't as good, this has changed recently with some advancements in CMOS technology (there are varying quality levels of CMOS to confuse matters).  In this particular kit, we are using the Sony 1/3" CCD 600TVL image sensor inside the camera.  We consider this the joint second-best image sensor in terms of picture quality you can get on a reversing camera.

image sensor inside camera

The approximate viewing angle is 90 degrees (D).

The camera has the 4 pin plug on its fly lead, this is waterproof.

The camera is waterproof up to IP68.

Camera works on 12V but if you buy with a 12V/24V monitor, the monitor reduces the voltage down to 12V.  This is the norm, and most 24V systems actually only supply 12V to the camera.

Detailed Images

Our fitting instructions for installing a flush fitting bumper/bullet reversing camera on to a car, van, motorhome.

Bumper Reverse Parking Cameras Instructions

See our general guide to installing 4 pin reversing cameras.  This includes fitting to stereos inc Kenwood / Sony / Pioneer etc.

Fitting guide for 4 pin reversing cameras including to stereo headunits

Image Device : 1/3 Sony 600TVL CCD
TV System: PAL
Effective Pixels: 648H*488V
Resolution: 600 TV lines
Minimum Illumination:0.01 Lux (IR leds on)
Built-in Lens: 2.8mm
Lens Angle 90 degrees (D)
Waterproof to Ip68
Infra red LEDs to provide night view
Mirror image