Parkingcameras.com

PM95F Numberplate Frame Reversing Camera Kit with 9-inch Dash Monitor

The PM95F kit combines a heavy-duty 9-inch dash monitor with a discreet numberplate frame reversing camera. Choose between the standard 600TVL CMOS sensor or upgrade to the GalaxyCore AHD 1080P option for higher resolution, sharper detail, and better low-light performance. With IP69K waterproofing, aspheric wide-angle lens, and easy fitment into your existing numberplate position, this system is ideal for cars, vans, and motorhomes needing a neat reversing solution.

Key features

• 9-inch dash monitor with clear LCD display (IPS panel on AHD upgrade)
• Numberplate frame style reversing camera for discreet installation
• Choice of 600TVL CMOS or GalaxyCore 1080P AHD upgrade
• 150° wide-angle aspheric lens reduces fish-eye distortion
• IP69K waterproof rating – highest available for durability
• 12–24 V DC input with built-in over-voltage protection
• Durable 4-pin aviation connectors for secure, weatherproof cabling
• Optional lighter plug or fuse tap for quick installation
• UK tested and supported, with 2-year guarantee

More about this kit

Camera options: The standard 600TVL CMOS sensor provides a clear reversing image, while the GalaxyCore 1080P AHD upgrade increases monitor resolution by 60% with an IPS panel, giving improved dynamic range, colour accuracy, and low-light vision.

Lens design: A 150° aspheric wide-angle lens maximises visibility while minimising distortion. Perfect for parking in tight spaces.

Waterproof reliability: Unlike many cheaper numberplate cameras prone to leaking, this model uses robust mechanical seals and has proven long-term reliability. Rated IP69K for the toughest conditions.

Simple fitting: Installation is straightforward – remove your existing numberplate, slide it into the new frame camera, and reattach using the same screw positions. The wire feeds in neatly using the supplied grommet or a small notch near the numberplate light.

Power options: Supplied with a standard hardwire lead. Optional lighter plug or fuse tap adaptors (standard, mini, or micro blade) are available for quick installation. Fuse taps include a pre-crimped 200 cm lead with chassis ground terminal.

4-pin aviation cabling: GX12 connectors ensure secure, weatherproof connections that resist CANBUS interference and maintain signal quality over long runs. High-quality pure copper cores are used for long-term reliability.

How to install the numberplate frame camera

1. Unscrew your existing numberplate from the vehicle.
2. Slide the plate into the new numberplate frame camera.
3. Reattach the numberplate and frame to the vehicle using the same screws.
4. Route the cable inside via the light cluster or supplied grommet channel.

Mounting takes only a few minutes. See our video guide for step-by-step fitting instructions.

Download our fitting guide for the number plate frame camera 

Specification snapshot

What’s in the box

• 9-inch dash monitor with U-shape mounting bracket
• Numberplate frame reversing camera
• Main harness and 4-pin camera cable (12.5 m standard length)
• Standard hardwire lead, optional lighter plug or fuse taps
• Optional additional monitor bracket if selected

Cable length guide

• 5 m: cars
• 10 m: medium vans (around 6 m length)
• 12.5 m: most vehicles up to 8.5 m (typical motorhomes)
• 15 m: larger vehicles up to 10–11 m (rigid lorries, small coaches)
• 20 m: very long vehicles (super long motorhomes, coaches, HGVs)

Supplied with one 4-pin camera extension lead – choose your preferred length when ordering.