PM55F: Premium Reversing Camera Kit - 5" Dash Screen + Top Spec Sharp CCD Numberplate Frame Camera

PM55F: Premium Reversing Camera Kit - 5" Dash Screen + Top Spec Sharp CCD Numberplate Frame Camera


RRP: £225.00
PRICE INCLUDES VAT £175.00
VAT 20.00 % (£29.17)
You Save

22%

Cable Length
Monitor Mount
Cigarette Lighter Plug
Quantity (41 available)



Availability 41 item(s) available
Weight 2.50 kg

Product Ref:

KIT-PM55F

Easy-Fit Wiring

This is one of our latest models, where the monitor powers up the camera down an all in one cable.  This makes the system easy to fit and avoids canbus issues that may arise on normal systems due to taking power supplies for the camera from the reversing light.


Image Sensor for Camera

This particular system uses the NEW 1/3" Sharp 600TVL CCD numberplate Camera (not to be confused with the older 1/3" sharp CCD 480TVL).  This camera has a unique lens to allow it to be one of the widest we sell but without too much fisheye effect.  It uses a aspheric lens to accomplish this.  This system also has sound due to this camera having a microphone.


Monitor has Digital LCD Panel - Not Standard LCD

The monitor uses a Hi-Res digital panel screen with more than 3 times the amount of pixels of the standard analogue LCD screens most other retailers sell.   (Please note some sellers multiply the first number by 3 for RGB, if we were to do that it sounds even more impressive (2400x480).  We prefer to keep it simple but check carefully our competitors, the last number is normally better to go by as this is the number of vertical lines of pixels. 


System Suitability

Our systems work on either 12V or 24V, no switches it will adjust to the voltage automatically, this also protects the kit from any surges from the vehicle upto 32V, which is why we have such a good reliability record from these voltage protected kits.


Optional - Quick Release Bracket

We have an optional quick release bracket available for this monitor, you may select it in the options above.  This will lock in to the back of the monitor using it's mounting channel.  The piece will slide down and click on to the quick release bracket which stays on the dashboard.  When you wish to remove the monitor (for theft prevention) you can disconnect the monitor cable around a foot back from the monitor, then simply pull the trigger on the bracket which unlocks the monitor and slide upwards.  You can then remove the monitor from the vehicle or hide it.

Picture below shows our PM60 MON16 7" monitor but the channel is the same on the 5" and the side bracket is removable.

 


2 Year Guarantee

We supply with a 2 year Guarantee with us, meaning we will repair or replace any non-user damaged parts that are deemed faulty.  Our failure rate is very low even beyond these two years, if you have a problem outside of 2 years we should still have compatible parts and possible repairs for reasonable amounts.


Parts Tested in the UK

The parts of this kit will have been tested twice, once by the factory and once by us.  We check all the items in the kit including all cables, trigger wires, IR leds and menu functions to reduce any chance of having a non working part.  Our fault rate is extremely low, and we just like to ensure that we avoid any imperfection slipping past.  This is why professional fitters love us.  

 


Technical Specs

Monitor

5” Colour LCD screen
Power supply: 12V/24V
Power Consumption: 4W Max
Digital Screen Resolution: 800 x3(RGB)x480
Luminance: 350cd/m2
2 Inputs
PAL/NTSC/AUTO
Full function Remote Control

5 inch rear view dash monitor dimensions

Camera

TV System: PAL
Sensing Area: 3.6mm x 2.7mm
Scanning System: 2:1Interlace
Sync. System: Internal
Minimum Illumination: 0 lux(LED ON)
Horizontal Sync. Frequency: 15.625KHz / 15.734KHz
Vertical Sync. Frequency: 50Hz / 60Hz
Video Output: 1.0vp-p, 75Ohm
Gamma Consumption: 0.45
AGC: Auto
S/N Ratio: Better than 48dB
White Balance: Auto
Electronic Shutter: 1/60(NTSC) / 1/50(PAL) ~ 1/10,000 Seconds
BLC: Auto
Current Consumption: Max. 120mA
Power Supply: DC12V
Operating Temperature: -20°C~70°C , RH95% MAX
Storage Temperature: -40°C~85°C, RH95% MAX
Lens: 1.8mm(P) / 1.8mm(N) F = 2.5
Lens Angle: 150° Approx (real world may be different as monitors crop the image)


Download Kit Fitting Instructions (.PDF)


Yes you can as the monitor is supplying the power to the camera and not the reverse light feed. You can power the camera on whenever you feel like it and leave it on whilst driving.
Yes, if you attach a reverse light feed to the trigger wire on the monitor (green wire) then it will automatically switch the monitor on and display the reversing camera. If you have two cameras attached and have the monitor on already viewing the alternative camera then it will switch across and once you have deselected reverse it will then switch back to the camera you were watching.
Yes, we have supplied these adaptors for numerous Bailey motorhomes owners including our own, there are a few more motorhome manufacturers that use the new style Waeco cable, please view the picture in the listing to see if yours is the same.
We have been specialising in reversing cameras for more than a decade, it's not a sideline for us, we don't need to stick on a big margin to justify keeping stock of the products. We simply sell thousands of kits and items per year and through all that time and experience we have built up a reliable selection of products with a very low fault rate (which means less margin needed to account for that). We realise that the internet is a very competitive market place, so we have found putting our prices to the lowest we can afford to, we sell more, which then generates enough overall profit to sustain the business. Our prices on the site are pretty much on par with trade prices so we get a lot of bulk purchase customers.
This used to puzzle us in the old days until we found the reason. It was a puzzle how auction site sellers were able to sell a system, pay the seller fees/postage to a customer and pay for staff/make a profit for less than we could bulk buy 1000's units of a similar system direct from the factory. We found out that everytime a factory has a bad run on quality control checks they sell the parts to be recycled and broken down for components. Unscrupulous sellers bring them to this country and send them out to people on the auction sites at crazy low prices, some will never be fitted (profit), some will be fitted months later and the customer won't be able to ask for their money back (profit), some will be fitted quickly and the customer complains (send another in the hope it works for a few months - smaller profit). I've had regular customers that went away temporarily to buy from the auction sites until they have a 70% plus failure rate and being fitters having to drive back and forth replacing wiring/monitors is cutting in to profits. It's the old saying "if it looks too good to be true then it usually is", we price our kits up to be very competitive and we make sure the spec is the highest we can. I have lost count of the amount of phone calls I get that start "I bought a system off (well known auction site)...", they are never happy when they realise that they will be installing a camera system for a second time and the first installation was a complete waste of their time.
: *
: *
: *