7" Mirror Monitor + Sony (CCD or CMOS option) Bullet Bumper Flush Reversing Camera Kit - PM34
Description
PM34 - 7 inch mirror monitor and flush fitting bumper reversing camera kit
Choice of kit power options
Easy-Fit Wiring
Image Sensor for CameraAn image sensor is the part of the camera that detects and captures information to make an image. You have two choices (selectable using the drop down box). The Sony CCD image sensor is coupled with a 90 degree lens, whilst the Sony CMOS image sensor is coupled with an even wider angle 120 degree lens. 2 Year GuaranteeWe supply with a 2-year Guarantee with us, meaning we will repair or replace any non-user damaged parts that are deemed faulty. Our failure rate is very low even beyond these two years, if you have a problem outside of 2 years we should still have compatible parts and possible repairs for reasonable amounts. Parts Tested in the UKThe parts of this kit will have been tested twice, once by the factory and once by us. We check all the items in the kit including all cables, trigger wires, IR LEDs and menu functions to reduce any chance of having a non-working part. Our fault rate is extremely low, and we just like to ensure that we avoid any imperfection slipping past. This is why professional fitters love us. |
Detailed Images
Many thanks to Apex Motorhome services for their photo of our bumper reverse camera fitted to their customers vehicle
Monitor Dimensions
Reversing Camera Dimensions
Wiring Layout (monitor side)
Wiring Layout (reversing camera side)
Fitting of flush fitting bumper bullet reversing camera
Photo showing how the monitor clamps to the existing interior mirror
Choice of power options suchas lighter plug and piggyback fuse holder taps
Video
Video to show how the clip-over mirror monitor attaches to the interior mirror.
Yes you can, the monitor powers the camera, this means you can choose to watch the camera at any point, you can drive with it "always on".
Our easy wire fuse tap options are new for 2023. We designed a fuse tap that plugs in to a socket that is present on all of our monitor wiring harnesses. The other side has a "piggyback" fuse holder aka fuse tap. You identify a fuse in the fuse box that comes on/off with the ignition (see piggyback fuse holder / fuse tap instructions here - PDF download). The original fuse is placed in to the new fuse tap, plus there is a new fuse already present for the reverse camera kit. On the same wiring there is an earth terminal connector, simply attach this to a chassis bolt (usually near the fuse box, or add your own).
Rough guide:
- 5M is good for an average size car
- 7.5M is good for large cars and shorter wheelbase vans
- 10M is good for a medium length van (around 6M)
- 12.5M is good for most vehicles up to around 8.5M long (covers most motorhomes except the super long)
- 15M is good for vehicles up to around 10/11M eg rigid lorry, small coach.
- 20M is good for super long vehicles
The camera is fitted with angled spacer rings. If you place the thinner of the two on the outside of the mounting surface, then place the corresponding one on the opposite side behind the mounting surface, then tighten the locking securing ring, you will have approximately 15 degrees of adjustment to play with. Please note that this won't make the camera as flush as it does when you don't use the angled rings.
Instructions for our MON293GL mirror monitor, supplied with the Sony CCD option.
Our fitting instructions for installing a flush fitting bumper/bullet reversing camera on to a car, van, motorhome.
Monitor7” Diagonally Measured Colour LCD screen CameraImage Device:1/3 Sony 600TVL CCD OR Image Device:1/3 Sony 700TVL CMOS |