Phono / RCA Connector Reversing Cameras

We used to stock a similar reversing camera many years ago.  When we found this one, which had the higher quality image sensor options available we gladly ordered some.  These were always a popular, easy to fit option for people wanting a small, discreet camera.  The actual camera part itself is only 22mm deep and 18mm in height, it is attached to a bracket that is mostly hidden behind the numberplate itself.  You have the option of using screws to attach this, or my preference is either an adhesive sealant, or some very strong tape such as Scotch Red.

We used to stock a similar reversing camera many years ago.  When we found this one, which had the higher quality image sensor options available we gladly ordered some.  These were always a popular, easy to fit option for people wanting a small, discreet camera.  The actual camera part itself is only 22mm deep and 18mm in height, it is attached to a bracket that is mostly hidden behind the numberplate itself.  You have the option of using screws to attach this, or my preference is either an adhesive sealant, or some very strong tape such as Scotch Red.

This uses the same image sensor and lens combination that we have fitted to our brake light cameras. Cable length of 5-20M can be selected inside listing.

This is the phono / RCA version of our popular dome reversing camera.  Fitted with a 1/3" Sony CCD 700TVL sensor for a great image both day and night.

These are the latest technology version of the very popular twin lens bracket camera we do.  These have a slightly different design bracket, looks more modern.  The bracket is made from stainless steel (we are one of the very rare sellers to have this) and will last a long time without rust.  Both cameras use the latest 960H 700TVL 1/3" Sony CCD image sensors for a great picture.
 

High resolution CCD camera, with infrared illumination at night, waterproof, 12 month guarantee and a 5m RCA video cable. The important thing about CCD cameras is they give a much better image than the cheaper CMOS versions. Cable length of 5-20M can be selected inside listing.
 

This is the bolt version number plate reverse camera.  Simply drill a small hole on the underside of your number plate ledge for the bolt of the camera to fit through.  Then fasten to vehicle with the special split type nut provided.  The result is a very small camera that is quite hard to even see!  We have had this made by the same factory that makes our upgraded brake light cameras.  Using their high quality PC4089 700TVL sensor and fully glass composite lens combination.  

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, but still with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, but still with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This uses the same image sensor and lens combination that we have fitted to our brake light cameras. Cable length of 5-20M can be selected inside listing.

This is the phono / RCA version of our popular dome reversing camera.  Fitted with a 1/3" Sony CCD 700TVL sensor for a great image both day and night.

These are the latest technology version of the very popular twin lens bracket camera we do.  These have a slightly different design bracket, looks more modern.  The bracket is made from stainless steel (we are one of the very rare sellers to have this) and will last a long time without rust.  Both cameras use the latest 960H 700TVL 1/3" Sony CCD image sensors for a great picture.
 

This is a colour reversing camera which fits in the bumper of your car or vehicle. It comes with a hole saw that is the correct width to cut the hole for the camera. It has infra red LED's to allow for good night time sight. Cable length of 5-20M can be selected inside listing.

This is one of our most popular cameras, especially with motorhome owners and van drivers. This has so much adjustment with the angles its just great. Eagle Eye view from above is possible with this great camera. Its got infra Red LED's for great vision at night time. It has a shade so it prevents sun glare and rain on the lens. Cable length of 5-20M can be selected inside listing.

This is one of our most popular cameras, especially with motorhome owners and van drivers. This has so much adjustment with the angles its just great. Eagle Eye view from above is possible with this great camera. Its got infra Red LED's for great vision at night time. It has a shade so it prevents sun glare and rain on the lens. Cable length of 5-20M can be selected inside listing.

We often get asked for the smallest camera we can find, with a good quality picture still. We have sourced these 1/4" CCD flush fit bumper cameras for people that want a subtle bumper/door mount camera but wants it as small as possible. This is as small or smaller than most parking sensors. It comes with an 18.5mm hole saw to cut out the ideal size hole for the camera.

Cable length of 5-20M can be selected inside listing. These cameras come with the 1/3" Sony CCD sensor and give a very good image.

White painted stainless steel bracket reversing camera to suit motorhomes/caravans/vans

This camera is the latest on the market. One issue with CCD cameras is they need a lot of volume to take the electronics. This means traditionally they were relatively large. New developments mean this is no longer true and this camera is one of the first using this technology. It is designed to mount in the number plate area with its mounting bracket mounted above it.