Brackets to fit reversing camera monitor displays

Brackets to fit reversing camera monitor displays

We have a selection of brackets below to fit our dashboard mounted reversing camera monitors.  We also have some labelled MON293B brackets, which fit a particular type of mirror monitor (not the clip on type) that we stock.

Butterfly Bracket for Dash Mount Monitors | ACC035

ACC035

This bracket is quite common amongst lots of vehicle monitors.  The unit can swivel left and right as well as back and forth.  There is a square washer that will fit in to the rear channel of the monitor then the bolt will screw in to this square washer using the rear thumb screw.  There is also a thumb screw on the left of the bracket to tighten the movement back and forth of the monitor.  Supplied with a self adhesive base, the "butterfly wings" can be bent to match the curves of your dashboard.

£5.50

VAT Included £0.92
Quantity

Quick Release Monitor Bracket for Stand Style Monitors | ACC041

ACC041

This fits any of our monitors with the slide channel mounting on the back. Which is currently all our 5 and 7" monitors. It has a part that stays on the slider mechanism and clicks into place on the bracket, which remains on the dashboard. There is a thumb release switch on the back of the bracket that allows the user to unclick the monitor quickly from the bracket base.

£6.60

VAT Included £1.10
Quantity

Ceiling Mount Bracket to fit a dash monitor to the ceiling location | ACC20540

ACC20540

We often get calls from people wishing to fit a dash monitor to a similar location to the rear view mirror. This bracket works with most of our monitors, the metal locator fits to the rear channel of the monitor and you twist the tightening wheel to lock the monitor in to position. The left hand side thumb screw allows the monitor to twist left or right and tilt up and down.

£19.80

VAT Included £3.30
Quantity

Suction Mount for Temporary Mounting a Reverse Camera Monitor | ACC038

ACC038

This fits any of our monitors with the slide mounting on the back.

£7.70

VAT Included £1.28
Quantity

Dashboard monitor bracket to attach to some windscreen mounting plates | ACCMB99

ACCMB99

This bracket allows you to mount one of our stand / dash monitors to attach to the windscreen.  The bracket comes with a Ford/Universal metal mounting plate as standard to fit in to the bracket.  We have optional loctite 319 windscreen button mounting adhesive to fix this to the windscreen.  We also have optional mounting plates to convert some popular mounting plates/buttons in to the same shape as a Ford button for this bracket to attach to.  

The metal groove slides in to the rear channels on most of our dash monitors, once at the desired position you will tighten the rear screw to lock the bracket and monitor in position.  The bracket has two ball joints for getting your desired angle.  

We recommend not being too forceful when adjusting the angle whilst the bracket is attached to the windscreen.  This is out of an abundance of precaution to avoid stress cracking the glass.

£24.00

VAT Included £4.00
Quantity

Heavy Duty Metal Dashboard Mount Bracket for Reverse Camera Monitor | ACC705B

ACC705B

This bracket is similar to our quick release bracket and is still quite easy to remove the monitor if needed by unscrewing the adjustment wheel behind the friction pad.  The metal groove slides in to the rear channels on most of our dash monitors, once at the desired position you will tighten the rear screw to lock the bracket and monitor in position.  The bracket can be spun left and right and monitor back and forth using the side thumb screw to tighten and loosen to allow adjustment.  The base is designed to be bent to shape for curvy dashboards and has a self adhesive pad on the base.  Screw holes are present if you wish to screw it down to a surface and the feet can be cut if placing in a compact space.

£7.70

VAT Included £1.28
Quantity

Ford* Swan neck bracket for non clip-over mirror monitors - ACCMB2 *check mounting on vehicle 1st

ACCMB2

This mounting is typically seen on Ford vans, as well as some others.

£18.00

VAT Included £3.00
Quantity

Unversal "add a button" Swan neck bracket bundle for non clip-over mirror monitors - ACCMB2+Button+Loctite 319 Glue

ACCMB2+Button+Loctite 319 Glue

This bundle combines our ACCMB2 Ford/Universal bracket, together with a Ford/Universal windscreen "button", and the Loctite 319 rear view mirror button adhesive kit.

£24.00

VAT Included £4.00
Quantity

£24.00

VAT Included £4.00
Quantity

£18.00

VAT Included £3.00
Quantity

Mercedes* Swan neck bracket for non clip-over mirror monitors with 4 rear screw holes - ACCMB5 *check mounting on vehicle 1st

ACCMB5

This mounting is typically seen on Mercedes Sprinter / Vito vans, as well as some Iveco vans, and the pre-2017 VW crafter.

£18.00

VAT Included £3.00
Quantity

Ceiling Mount Swan neck bracket for non clip-over mirror monitors with 4 screw hole mounting - ACCMB6

ACCMB6

This mounting allows the bracket mirror monitor to be mounted on to the ceiling.

£18.00

VAT Included £3.00
Quantity

Mercedes Sprinter Hex Mounting (Auto Lights/Wiper models) Swan neck bracket for mirror monitors with 4 screw hole mounting - ACCMB1

ACCMB1

We have encountered a different style of windscreen mount on some Mercedes Sprinter vans. We believe it is models that are fitted with either auto lights, or auto windscreen wipers.  This bracket will allow our bracket type mirror monitor to mount to this metal button.   Please see photo.

£18.00

VAT Included £3.00
Quantity

Earlier Fiat Ducato / Citroen Relay / Peugeot Boxer / Iveco Daily Swan neck bracket for bracket capable mirror monitors - ACCMB7 *check mounting on vehicle 1st

ACCMB7

This mounting is typically seen on earlier Ducato/Relay/Boxer/Iveco vans. This bracket is designed to mate with the OEM windscreen stub, so that a mirror monitor with a 4 screw mounting point can attach to it.

£18.00

VAT Included £3.00
Quantity