Reversing Cameras

This uses the same image sensor and lens combination that we have fitted to our brake light cameras. Cable length of 5-20M can be selected inside listing.

This is one of our biggest selling reversing camera and is supplied as standard with a number of our 12/24V reversing camera kits. The 4 pin connector enables a nice waterproof connection between the 4 pin lead and the camera. The 4 pin leads carry both power and video down the one cable.
 

This is an updated version of the roof mounted overhang reverse camera.  This version has an added rear view camera as a permanent on driving aid.

This is one of the latest cameras on the market that bypass the problem of lipped doors which mean you can't fit a traditional bracket camera above the doors. This allows you to have a birds eye view still on lots of the modern vans.

You may recognise this camera from a very expensive branded system, that's because we used the same factory to import it from except we had the very latest 600TVL 1/3" Sharp CCD (not to be confused with the older 420TVL 1/3" Sharp CCD).  We would say this new image sensor is on par with the Sony 700TVL we use in our other high end cameras.  This camera has a nice polished Stainless Steel Bracket with a grey/silver painted main body. 

This is one of the latest cameras on the market that bypass the problem of lipped doors which mean you can't fit a traditional bracket camera above the doors. This allows you to have a birds eye view still on lots of the modern vans.
 

We kept getting asked for a numberplate camera with night vision that has a good quality picture.  Well here it is.

We kept getting asked for a numberplate camera with night vision that has a good quality picture.  Well here it is.

Cable length of 5-20M can be selected inside listing. These cameras come with the 1/3" Sony CCD sensor and give a very good image.

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is the bolt version number plate reverse camera.  Simply drill a small hole on the underside of your number plate ledge for the bolt of the camera to fit through.  Then fasten to vehicle with the special split type nut provided.  The result is a very small camera that is quite hard to even see!  We have had this made by the same factory that makes our upgraded brake light cameras.  Using their high quality PC4089 700TVL sensor and fully glass composite lens combination.  

This is one of our latest cameras in, we wanted to add a small flexible camera to our range, but still with a high resolution.  We asked for these cameras to be made with the PC4089 image sensor - the same sensor we use in our brake light cameras, we spent extra to spec the cameras out with 4 glass lenses, instead of the standard 2 glass/2 plastic that you would usually see on these type of cameras (we chose all glass lenses because the plastic lenses go cloudy over time, because of UV exposure from the sun).  The PC4089 image sensor is one of the modern latest generation of CMOS (not to be confused with the cheap and cheerful CMOS of the past).  As the price is lower than CCD, we have passed these savings on to you. 

This is the phono / RCA version of our popular dome reversing camera.  Fitted with a 1/3" Sony CCD 700TVL sensor for a great image both day and night.

This is the same camera as our CAM070W, the only difference being the body of the camera is black. Cable length of 5-20M can be selected inside listing.

This is a rear view camera with a more narrow field of view to see following traffic easily.
 

This camera is very flexible in where it is mounted, if there is a flat surface (eg bumper) where you can access the rear to tighten up, then it can be fitted. 

We get asked by some people for a camera they can make normal view instead of mirror (perhaps as an internal camera or a camera looking forwards or to the side).  Although we wouldn't recommend it low down looking forwards due to the risk of stone chips.

We often get asked for the smallest camera we can find, with a good quality picture still. We have sourced these 1/4" CCD flush fit bumper cameras for people that want a subtle bumper/door mount camera but wants it as small as possible. This is as small or smaller than most parking sensors. It comes with an 18.5mm hole saw to cut out the ideal size hole for the camera.

A small, good quality reversing camera with a 1/4" Sony CCD image sensor fitted inside.

This camera is the latest on the market. One issue with CCD cameras is they need a lot of volume to take the electronics. This means traditionally they were relatively large. New developments mean this is no longer true and this camera is one of the first using this technology. It is designed to mount in the number plate area with its mounting bracket mounted above it.

This is usually used as a side camera, and is fitted with a top spec 1/3" Sony CCD 700TVL image sensor.

This is usually used as a side camera.