Fiat Ducato, Citroen Relay, Peugeot Boxer, Vauxhall Movano brake light reversing camera

This listing is perfect if you want a reversing camera for a Citroen Relay, Peugeot Boxer, Fiat Ducato or Vauxhall Movano van.  We stock two types of brake light reverse camera for these vans, this listing is for more common screw from front type.  Some older models had a bolt from the rear design, if you have the bolt version then please see bolt version Fiat Ducato, Citroen Relay, Peugeot Boxer brake light reversing camera.

What vehicle does this fit?

Citroen Relay 2006-Present

Peugeot Boxer 2006-Present

Fiat Ducato 2006-Present

Vauxhall Movano 2022-Present

Fitting the brake light camera

Fitting the brake light camera is very simple.  The brake light reversing camera re-uses your existing brake light strip.  Simply remove the existing brake light via the two securing cross head screws.  Gently release the three tabs on the top and bottom of the brake light to release the light strip.  Then transplant this in to the new brake light camera.  Re-screw this back to your vehicle with the two original screws.

See our video below for details about fitting the brake light camera

Brake light reversing cameras are an incredibly popular and convenient way to install a camera to your van. They are easy to install, don't require new holes or mountings to be made, and look very neat and tidy, almost like they had been fitted by the factory.

You have some adjustment up and down, however it is worth mentioning that the adjustment doesn't allow you to use it to see down the road, if you did want the camera to view down the road then please see our double camera version. 

The image sensor installed is the PC4089, the image quality is very high thanks to its 960h/700TVL image sensor.  We have specified 4x glass composite lenses, these will last many years compared to the cheaper 2x glass, 2x plastic we see elsewhere on cheaper cameras that become faded/cloudy from UV exposure over time.

We use 4 pin aviation connectors on our cameras, this gives you the option to connect to a 4 pin monitor to allow the monitor to power the camera. 

We can also supply a discounted adaptor set (see picture) to allow it to be used with phono connectors instead.