Parkingcameras.com

About the adjustable Sharp CCD number plate reversing camera with night vision IR LED's

This is a very high quality number plate reversing camera, made by a factory that produces some of the best equipment we have seen.

Similar looking cameras tend to fill auto electricians with a sense of dread, as similar barrel based cameras have an awful reputation for leaking.  Not this one!  These cameras have been impeccable, and are even waterproof rated to IP69K. 

This reversing camera is fitted with the Sharp 1/3" CCD 600TVL image sensor - a fantastic, sensitive sensor to give good colour/night image/resolution.

With this camera you will get a great picture. The camera is fitted with an Aspheric lens, which creates a wide angle without too much fish bowl effect.  The camera can be adjusted/angled up and down within the housing, and can either be mounted on a vertical, or horizontal surface - the inner camera "barrel" can be removed and re-inserted to allow this.

The camera has a 4 pin screw connector on the end of a fly lead.  This is the most common, preferred connection.  If you wish to fit this to a car stereo, or phono/RCA monitor, then you will need some adaptors to convert the cabling to this.  We have a discounted adaptor set available on the drop down menu to order these.

Image sensor fitted to this reversing camera

The image sensor we have installed is the Sharp 1/3" CCD 600TVL image sensor.  This is a very high performance image sensor - for great day and night images.