SS120 - 7" Splitscreen with 2 cameras - Choose your cameras and cable lengths inside listing

About this kit

In this kit you have a choice of 2 cameras and 2 cable lengths.  View the image above to choose your 2 cameras then select these using the drop down menus and then select add to cart (cable lengths can also be altered if required).  To view more details about the individual cameras see the links lower down in this page.  The monitor uses an 800x480 digital hi-res panel and can work on both 12V and 24V.  The monitor powers the cameras down an all in one cable.  It is worth mentioning that the split screen monitor isn't recommended if you only plan to use one camera at a time, although it can show one camera full screen we find the resolution is slightly lower in comparison to our other monitors because on split screen monitors the image will be going through a multiplexer. See our other kits if you don't need a split screen at any time.

Split Screen Modes

Easy-Fit Wiring

This is one of our latest models, where the monitor powers up the camera down an all in one cable.  This makes the system easy to fit and avoids canbus issues that may arise on normal systems due to taking power supplies for the camera from the reversing light.

System Suitability

Our systems work on either 12V or 24V, no switches it will adjust to the voltage automatically, this also protects the kit from any surges from the vehicle upto 32V, which is why we have such a good reliability record from these voltage protected kits.

Optional - Quick Release Bracket

We have an optional quick release bracket available for this monitor, you may select it in the options above.  This will lock in to the back of the monitor using it's mounting channel.  The piece will slide down and click on to the quick release bracket which stays on the dashboard.  When you wish to remove the monitor (for theft prevention) you can disconnect the monitor cable around a foot back from the monitor, then simply pull the trigger on the bracket which unlocks the monitor and slide upwards.  You can then remove the monitor from the vehicle or hide it.

2 Year Guarantee

We supply with a 2 year Guarantee with us, meaning we will repair or replace any non-user damaged parts that are deemed faulty.  Our failure rate is very low even beyond these two years, if you have a problem outside of 2 years we should still have compatible parts and possible repairs for reasonable amounts.

Parts Tested in the UK

The parts of this kit will have been tested twice, once by the factory and once by us.  We check all the items in the kit including all cables, trigger wires, IR leds and menu functions to reduce any chance of having a non working part.  Our fault rate is extremely low, and we just like to ensure that we avoid any imperfection slipping past.  This is why professional fitters love us.  

What cable length should I select?

Rough guide:

5M is good for a car

10M is good for a medium length van (around 6M)

12.5M is good for most vehicles up to around 8.5M long (covers most motorhomes except the super long)

15M is good for vehicles up to around 10/11M eg rigid lorry, small coach.

20M is good for super long vehicles

Trailer Link is ideal when you are placing the camera on a trailer

Links to camera information (click on picture)

Below you can click on the images to be taken to that cameras information page where you will find more information including dimensions and technical specs.  All the cameras chosen are premium cameras with the same 4 pin aviation waterproof cabling that the monitor accepts.

Instruction Manual